Hi Jens,

Thanks for the command. I was looking for something like this.
However, I am still confused on the time stamp calculation.
My Binary file had the starting time as "26.040173218 seconds" , but
with the below command,

cat file_54657438_1000lines.bin | blkparse - | less

  8,0   60        0     0.000000000 54657438  Q   R 24014152 + 8 [(null)]
  8,0   60        0    66.860158593 54657438  Q   R 805379152 +8 [(null)]
  8,0   60        0    80.644832628 54657438  Q   R 24014160 + 8 [(null)]

The first line starts at 0 timestamp and then 66sec etc. I dont
understand how the 66sec is calculated in the above blkparse command.
Shouldnt it be 26.040173218 sec ?

I do see 26.040173218 in the binary file and checked this using a
binary viewer.Attached is the binary viewer of the file.
Please help me understand.

Thanks,
Lakshmi

On Thu, Apr 10, 2014 at 5:07 PM, Jens Axboe <axboe@kernel.dk> wrote:
> On 04/10/2014 12:25 PM, Lakshmi wrote:
>>
>> Hi Jens,
>>
>>   I am seeing a strange problem. I have a 47KB Blkparsed binary file
>> and I tried replaying it with and without the "replay_no_stall"
>> option.
>>
>> With the "replay_no_stall" option, I am seeing some IOPS
>> happening.Please see below.
>> WITH "REPLAY_NO_STALL=1"
>> =====================================================
>> job9: (g=0): rw=read, bs=4K-4K/4K-4K/4K-4K, ioengine=sync, iodepth=1
>> fio-2.1.7
>> Starting 1 process
>> Jobs: 1 (f=2): [M] [-.-% done] [1064KB/72KB/0KB /s] [266/18/0 iops]
>> [eta 00m:00s]
>> job9: (groupid=0, jobs=1): err= 0: pid=34226: Thu Apr 10 12:00:54 2014
>>    read : io=3792.0KB, bw=1126.3KB/s, iops=281, runt=  3367msec
>>      clat (usec): min=88, max=8536, avg=3546.19, stdev=1469.46
>>       lat (usec): min=88, max=8536, avg=3546.35, stdev=1469.47
>> =====================================================
>> However, when I don't set the "REPLAY_NO_STALL" option, I see 0
>> IOPS.Please see below
>> job9: (g=0): rw=read, bs=4K-4K/4K-4K/4K-4K, ioengine=sync, iodepth=1
>> fio-2.1.7
>> Starting 1 process
>>
>> job9: (groupid=0, jobs=1): err= 0: pid=33979: Thu Apr 10 10:39:42 2014
>>    read : io=3792.0KB, bw=2004B/s, iops=0, runt=1937594msec
>>      clat (usec): min=87, max=14320, avg=4763.37, stdev=2001.45
>>       lat (usec): min=87, max=14320, avg=4763.52, stdev=2001.50
>> ===========================================================
>>
>> My starting time in the blkparsed binary file is 26.040173218 seconds
>> and last time is 26.150699031.
>>
>> Attached is the binary file I am using to replay.
>>
>> I understand replay_no_stall option doesnt respect the timestamps, but
>> without this option the job should be executing with the delays, and
>> not sure why no OPS are reported.
>>
>> Any idea what is causing this strange behavior?Please help.
>
>
> It reports no IOPS, because it's slow enough to not register any. The first
> trace in the file is at timestamp 0.00 relative, and the last one is at
> 31110.250640101. Check for yourself with:
>
> cat file_54657438_1000lines.bin | blkparse - | less
>
> --
> Jens Axboe
>