From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 65841C48BC3 for ; Mon, 19 Feb 2024 08:46:20 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 53ACB87F26; Mon, 19 Feb 2024 09:46:18 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="OLelqlbt"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 3C2B687F28; Mon, 19 Feb 2024 09:46:14 +0100 (CET) Received: from mail-vs1-xe32.google.com (mail-vs1-xe32.google.com [IPv6:2607:f8b0:4864:20::e32]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 5C86C87DE0 for ; Mon, 19 Feb 2024 09:46:02 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=sumit.garg@linaro.org Received: by mail-vs1-xe32.google.com with SMTP id ada2fe7eead31-4704750edd7so74641137.0 for ; Mon, 19 Feb 2024 00:46:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1708332361; x=1708937161; darn=lists.denx.de; h=cc:to:subject:message-id:date:from:in-reply-to:references :mime-version:from:to:cc:subject:date:message-id:reply-to; bh=Q4q+sbFoutos19ubRDPLvFR7uB87tBWpUNdq80QddWw=; b=OLelqlbttnpTIGK4n8E0C5ocS8c2sBRxUGzj+iNtryUkbbaGz2wR8q61bCfujfc8Hr xoypWYkoP69s1CxOm3q9YQIngrD8KzgveGC4q3rIMCikUTxcuEo4w+3sWUJLHPhRlXO8 tCSS3xnOSi/ZX2onvSC0hJTN/5S8RQeZshT52+qLw3H45OMjAgzZCtu7X4FpNA073joK 2sOOoQNI8buhqOmRLfw42R9nh/jbEIZkux0UalySRcd87acVmocAGNu7KYg2KScfLBNo h4dpOam629dwJiVAy7hFHy+iBLGV9N9XJrS/D//SxtkOtTEzYZV8QJSwbx1DVKtUSnuj kRFw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1708332361; x=1708937161; h=cc:to:subject:message-id:date:from:in-reply-to:references :mime-version:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=Q4q+sbFoutos19ubRDPLvFR7uB87tBWpUNdq80QddWw=; b=eQBVcvdGCiQx5QEp7XwU4UyaQS2bQpRzA863FvAmDRQtQA0r6vjxPbvZLAoz95FhYs fuFXK65vR6Y4gJvzZ9g/H3olSua82eBds2MXm5rD7Bcg3Q6Md5cwmp8x4rGJWo59zMx1 EclsB/PE4i13D2TcPFWiWzUo5gIbtt8s8kwSe0LK4QRHRiyTga2ybBQgdPAzVJulOhDv +EyVaBfXIXgLTsRrzmZo7FagrPLMsH6vVzXXvgTukEB+FI6Pb7mtZxFFQdTQbcWNN9Lc 3iJENy6VmDTXw8GQr5Xbh2X5e+RzlFtnuKIBXnfhSc6C0YsL0RY3JynRwRv++ElWugp2 ZkOA== X-Forwarded-Encrypted: i=1; AJvYcCWQr7RRBomhdofBTimmrY84qm5/AUXE2/ohoKXlxNIhTg1GrSYHD2PyP9lYLrSZBVz7/HgF/3WU6TIECQ5aIWiM4sZlnw== X-Gm-Message-State: AOJu0YyPjvenFKIDAXKfx5stnpR/IjCNsKlyvRp7QOAzpria5/ZE9Ftz RjiRoH51qM94X9b/DKsoQ9ruh7iyQk4xJKMk8OtU9DSAe64rLVyDLQ6pNVlhIYNCgDuddMcjnzv Z7ps23s/GbYzMueimlC+ga9w6J23JEQqExy00PA== X-Google-Smtp-Source: AGHT+IHBNodtT7cQRq09ypxmsblkFKbQ8ItCQewuA+Ybo5hh0aw6Oa7OQCXGtpzxcCnWaU3mjHjZ2ntviVL92M60+e8= X-Received: by 2002:a67:ec0a:0:b0:470:4dd8:b18 with SMTP id d10-20020a67ec0a000000b004704dd80b18mr2294439vso.19.1708332361231; Mon, 19 Feb 2024 00:46:01 -0800 (PST) MIME-Version: 1.0 References: <20240215-b4-qcom-common-target-v4-0-ed06355c634a@linaro.org> In-Reply-To: <20240215-b4-qcom-common-target-v4-0-ed06355c634a@linaro.org> From: Sumit Garg Date: Mon, 19 Feb 2024 14:15:50 +0530 Message-ID: Subject: Re: [PATCH v4 00/39] Qualcomm generic board support To: Caleb Connolly Cc: Neil Armstrong , Ramon Fried , Dzmitry Sankouski , Peng Fan , Jaehoon Chung , Rayagonda Kokatanur , Lukasz Majewski , Sean Anderson , Jorge Ramirez-Ortiz , Stephan Gerhold , Marek Vasut , u-boot@lists.denx.de, Tom Rini Content-Type: text/plain; charset="UTF-8" X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Hi Caleb, On Fri, 16 Feb 2024 at 02:22, Caleb Connolly wrote: > > Historically, Qualcomm boards in U-Boot have all had their own > board/qualcomm/xyz directory, their own CONFIG_TARGET_XYZ option, their > own hardcoded sysmap-xyz.c file, and their own U-Boot specific > devicetree with little/no compatibility with upstream DT. > > This series makes a few final prepatory changes, and then replaces > almost all of the board specific code with generic alternatives. The end > result is that all Qualcomm boards both current and future (with the > exception of the db410c and db820c) can be supported by a single U-Boot > binary by just providing the correct DT. New boards can be added without > introducing any addition mach/ or board/ code or config options. > > Due to the nature of this change, the patch ("mach-snapdragon: > generalise board support") has become pretty big, I tried a few > different ways to represent this in git history, but the other methods > (e.g. adding a stub "generic" target and removing it again) were more > confusing and made for much messier git history. The current patch is > mostly atomic, but requires regenerating the config. > > The QCS404 EVB board had some code to enable the USB VBUS regulator, > this is dropped in favour of a adding a new vbus-supply property to the > dwc3-generic driver. This will also be used by the dragonboard845c in a > future patch. This handles the common case of a board requiring some > regulator be enabled for USB host mode. > > A more detailed description of the changes is below. > > == Memory map == > > The memory map was historically hardcoded into U-Boot, this meant that > U-Boot had to be built for a specific variant of a device. This is > changed to instead read the memory map from the DT /memory node. > > Additionally, most boards mapped addresss 0x0 as valid, as a result if a > null pointer access happens then it will cause a bus stall (and board > hang). This is fixed so that null pointer accesses will now correctly > throw an exception. > > == DT loading == > > Previously, boards used the FDT blob embedded into U-Boot (via > OF_SEPARATE). However, most Qualcomm boards run U-Boot as a secondary > bootloader, so we can instead rely on the first-stage bootloader to > populate some useful FDT properties for us (notably the /memory node and > KASLR seed) and fetch the DTB that it provides. Combined with the memory > map changes above, this let's us entirely avoid configuring the memory > map explicitly. > > == defconfig == > > Most of the board defconfigs and config headers were quite similar, to > simplify maintenance going forward, all the fully generic boards (sdm845 > and qcs404-evb so far) are adapted to use the new qcom_defconfig. Going > forward, all new Qualcomm boards should be supported by this defconfig. > A notable exception is for specific usecases (like U-Boot as the primary > bootloader). > > == The older dragonboards == > > The db410c and db820c both have some custom board init code, as a result > they aren't yet binary compatible. mach-snapdragon is adjusted so > that all the necessary config options (e.g. CONFIG_SYS_BOARD) can be set > from their defconfigs, this makes it possible to enable support for new > boards without introducing additional config options. > > The db410c can run U-Boot either chainloaded like the other boards, or > as a first-stage bootloader replacing aboot. However it was hardcoded to > only build for the latter option. This series introduces a new > "chainloaded" defconfig to enable easier testing via fastboot. > > == dynamic environment variables == > > This series also introduces runtime-allocated load addresses via the lmb > allocator. This allows for booting on boards with vastly different > memory layouts without any pre-calculation or macro magic in the config > header. This feature is based on similar code in mach-apple. > > The soc, board, and fdtfile environment variables are also generated > automatically. Many Qualcomm boards follow a similar scheme for DTB > naming such that the name can often be derived from the root compatible > properties. This is intended to cover the most common cases and be a > simple solution for booting generic distro images without having to > explicitly choose the right DTB. The U-Boot DTS can be tweaked if > necessary to produce the correct name, the variable can be overwritten, > or a bootloader like GRUB can load the devicetree instead. > > == Upstream DT == > > All Qualcomm boards have had their devicetree files replaced with the > upstream versions. Previous patch series made the necessary driver > adjustments to fully support the upstream DT format. All future > Qualcomm boards should use upstream DTS by default. > > Once Sumit's work to import dt-rebasing has been merged, we will drop > the imported DT and bindings again. > > --- > I have tested this series on the Dragonboard410c, Dragonboard820c, and > Dragonboard845c. I unfortunately don't have access to a QCS404 EVB board > to test. Thanks for incorporating my feedback (on ML as well as offline) to resolve regressions seen on db41c and qcs404. Feel free to add following to corresponding patches: Tested-by: Sumit Garg #qcs404 -Sumit > > This series is based on the qcom-next branch [1] and depends on my PMIC > fixes series [2], an integration branch for testing can be found at [3]. > The non-qualcomm-specific changes (patches 1 and 2) don't have any > dependencies. > > [1]: https://source.denx.de/u-boot/custodians/u-boot-snapdragon > [2]: https://lore.kernel.org/u-boot/20231114-b4-qcom-dt-compat-v3-0-88a92f8f00ba@linaro.org/ > [3]: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/tree/b4/qcom-common-target > > --- > Changes in v4: > - Drop unreachable return in ehci_usb_of_bind() > - Adjust error reporting in msm_sdc_clk_init() to not print ret which > will always be 0. > - Simplify qcom_pmic_gpio and associated pinctrrl driver. > - Fix the bit clock divider on QCS404 (thanks Sumit). > - Make QCS404 pinctrl driver compatible with upstream DT. > - Fix qcs404_clk_set_rate() return values + move some things that should > be in enable. > - Optimise reserved memory carveout algorithm and fix the last regions > always getting skipped. > - Adjust APQ8016 to probe the pinctrl driver pre-relocation so that UART > can be initialised. > - Stub in support for special pins in the Qualcomm pinctrl driver - we > don't support them yet but in most cases they're already configured > correctly and can be safely skipped. > - Improve readability of sdhci msm_sdc_clk_init() and use log_warning() > instead of printf(). > - Add missing CONFIG_SAVE_PREV_BL options to qcom_defconfig > - Document known issue only affecting qcs404 where in the msm_sdhci driver > the xo_board clock somehow becomes associated with the qcom_clock device > resulting in qcs404_clk_set_rate() being called for clock id 0. This > doesn't seem to cause any issues but has proven somewhat elusive to debug. > - Add a link to the APQ8016 TRM in doc/board/qualcomm/dragonboard410c.rst > - Link to v3: https://lore.kernel.org/r/20240130-b4-qcom-common-target-v3-0-e523cbf9e556@linaro.org > > Changes in v3: > - Remove dragonboard410c.dts file > - Introduce generic board_usb_init() function. > - Remove db410c specific dead code (smem RAM layout) > - Fix pinctrl DT compatibility for msm8916/msm8996 > - Reference git tag where DT and headers were taken from Linux. > - Adjust ramdisk allocation size to 128M > - Improve documentation wording, reference buildman > - Fix mapping for reserved regions to avoid speculative pre-fetching > - Apply quicksort to memory banks read from DT to ensure ordering > - Link to v2: https://lore.kernel.org/r/20231219-b4-qcom-common-target-v2-0-b6dd9704219e@linaro.org > > Changes in v2: > - Split DTS changes to reduce patch size. > - Import full board DTS files from Linux too, and introduce -u-boot.dtsi > files where necessary to make any U-Boot specific changes. > - Add a pinctrl driver for qcom PMIC GPIOs > - Always enable LINUX_KERNEL_IMAGE_HEADER > - Link to v1: https://lore.kernel.org/r/20231121-b4-qcom-common-target-v1-0-9492198e0c15@linaro.org > > To: Neil Armstrong > To: Sumit Garg > To: Ramon Fried > Cc: Marek Vasut > To: Dzmitry Sankouski > To: Caleb Connolly > To: Peng Fan > To: Jaehoon Chung > To: Rayagonda Kokatanur > To: Lukasz Majewski > To: Sean Anderson > To: Jorge Ramirez-Ortiz > To: Stephan Gerhold > Cc: > > --- > Caleb Connolly (39): > arm: init: export prev_bl_fdt_addr > usb: dwc3-generic: support external vbus regulator > mmc: msm_sdhci: use modern clock handling > dt-bindings: drop msm_sdhci binding > clk/qcom: use upstream compatible properties > clock/qcom: qcs404: fix clk_set_rate > serial: msm: add debug UART > serial: msm: fix clock handling and pinctrl > gpio: qcom_pmic: 1-based GPIOs > gpio: qcom_pmic: add a quirk to skip GPIO configuration > gpio: qcom_pmic: add pinctrl driver > sandbox: dts: fix qcom pmic gpio > pinctrl: qcom: stub support for special GPIOs > pinctrl: qcom: fix DT compatibility > pinctrl: qcom: apq8016: init pre-reloaction > board: dragonboard410c: add chainloaded config fragment > board: dragonboard410c: upstream DT compat > board: dragonboard410c: import board code from mach-snapdragon > board: dragonboard820c: use LINUX_KERNEL_IMAGE_HEADER > mach-snapdragon: generalise board support > mach-snapdragon: dynamic load addresses > mach-snapdragon: generate fdtfile automatically > mach-snapdragon: carve out no-map regions > board: qcs404-evb: drop board code > doc: board/qualcomm: document generic targets > doc: board/qualcomm: link to APQ8016 TRM > dt-bindings: import headers for SDM845 > dts: sdm845: import supporting dtsi files > dts: sdm845: replace with upstream DTS > dt-bindings: import headers for MSM8916 > dts: msm8916: import PMIC dtsi files > dts: msm8916: replace with upstream DTS > dt-bindings: import headers for MSM8996 > dts: msm8996: import PMIC dtsi files > dts: dragonboard820c: use correct bindings for clocks > dts: msm8996: replace with upstream DTS > dt-bindings: import headers for qcs404 > dts: qcs404-evb: replace with upstream DT > MAINTAINERS: Qualcomm: add some missing paths > > MAINTAINERS | 12 +- > arch/arm/Kconfig | 4 + > arch/arm/dts/Makefile | 9 +- > arch/arm/dts/apq8016-sbc-u-boot.dtsi | 20 + > arch/arm/dts/apq8016-sbc.dts | 729 +++ > arch/arm/dts/apq8096-db820c-u-boot.dtsi | 14 + > arch/arm/dts/apq8096-db820c.dts | 1137 ++++ > arch/arm/dts/dragonboard410c-uboot.dtsi | 44 - > arch/arm/dts/dragonboard410c.dts | 209 - > arch/arm/dts/dragonboard820c-uboot.dtsi | 32 - > arch/arm/dts/dragonboard820c.dts | 151 - > arch/arm/dts/dragonboard845c-uboot.dtsi | 26 - > arch/arm/dts/dragonboard845c.dts | 48 - > arch/arm/dts/msm8916-pm8916.dtsi | 157 + > arch/arm/dts/msm8916.dtsi | 2702 +++++++++ > arch/arm/dts/msm8996.dtsi | 3884 +++++++++++++ > arch/arm/dts/pm8916.dtsi | 178 + > arch/arm/dts/pm8994.dtsi | 152 + > arch/arm/dts/pm8998.dtsi | 130 + > arch/arm/dts/pmi8994.dtsi | 65 + > arch/arm/dts/pmi8998.dtsi | 98 + > arch/arm/dts/pms405.dtsi | 149 + > arch/arm/dts/qcs404-evb-4000-u-boot.dtsi | 48 + > arch/arm/dts/qcs404-evb-4000.dts | 96 + > arch/arm/dts/qcs404-evb-uboot.dtsi | 30 - > arch/arm/dts/qcs404-evb.dts | 390 -- > arch/arm/dts/qcs404-evb.dtsi | 389 ++ > arch/arm/dts/qcs404.dtsi | 1829 ++++++ > arch/arm/dts/sdm845-db845c.dts | 1190 ++++ > .../arm/dts/sdm845-samsung-starqltechn-u-boot.dtsi | 16 + > arch/arm/dts/sdm845-samsung-starqltechn.dts | 460 ++ > arch/arm/dts/sdm845-wcd9340.dtsi | 86 + > arch/arm/dts/sdm845.dtsi | 5801 +++++++++++++++++++- > arch/arm/dts/starqltechn-uboot.dtsi | 27 - > arch/arm/dts/starqltechn.dts | 68 - > arch/arm/lib/save_prev_bl_data.c | 5 + > arch/arm/mach-snapdragon/Kconfig | 95 +- > arch/arm/mach-snapdragon/Makefile | 8 +- > arch/arm/mach-snapdragon/board.c | 468 ++ > arch/arm/mach-snapdragon/dram.c | 99 - > arch/arm/mach-snapdragon/include/mach/dram.h | 12 - > arch/arm/mach-snapdragon/include/mach/gpio.h | 2 + > arch/arm/mach-snapdragon/include/mach/misc.h | 13 - > arch/arm/mach-snapdragon/init_sdm845.c | 73 - > arch/arm/mach-snapdragon/misc.c | 55 - > arch/arm/mach-snapdragon/sysmap-apq8016.c | 31 - > arch/arm/mach-snapdragon/sysmap-apq8096.c | 31 - > arch/arm/mach-snapdragon/sysmap-qcs404.c | 43 - > arch/arm/mach-snapdragon/sysmap-sdm845.c | 31 - > arch/sandbox/dts/sandbox.dtsi | 9 +- > board/qualcomm/dragonboard410c/Kconfig | 15 - > board/qualcomm/dragonboard410c/Makefile | 2 +- > .../dragonboard410c/configs/chainloaded.config | 7 + > board/qualcomm/dragonboard410c/dragonboard410c.c | 130 +- > board/qualcomm/dragonboard820c/Kconfig | 15 - > board/qualcomm/dragonboard820c/Makefile | 1 - > board/qualcomm/dragonboard820c/dragonboard820c.c | 39 +- > board/qualcomm/dragonboard820c/head.S | 33 - > board/qualcomm/dragonboard820c/u-boot.lds | 111 - > board/qualcomm/dragonboard845c/Kconfig | 12 - > board/qualcomm/qcs404-evb/Kconfig | 15 - > board/qualcomm/qcs404-evb/Makefile | 6 - > board/qualcomm/qcs404-evb/qcs404-evb.c | 62 - > configs/dragonboard410c_defconfig | 8 +- > configs/dragonboard820c_defconfig | 8 +- > configs/dragonboard845c_defconfig | 29 - > configs/qcom_defconfig | 67 + > configs/qcs404evb_defconfig | 55 - > configs/starqltechn_defconfig | 41 - > doc/board/qualcomm/board.rst | 125 + > doc/board/qualcomm/debugging.rst | 61 + > doc/board/qualcomm/dragonboard410c.rst | 2 + > doc/board/qualcomm/index.rst | 4 +- > doc/board/qualcomm/qcs404.rst | 79 - > doc/board/qualcomm/sdm845.rst | 167 - > doc/device-tree-bindings/mmc/msm_sdhci.txt | 25 - > doc/device-tree-bindings/usb/ehci-msm.txt | 10 - > drivers/clk/qcom/clock-apq8016.c | 9 +- > drivers/clk/qcom/clock-apq8096.c | 7 +- > drivers/clk/qcom/clock-qcs404.c | 25 +- > drivers/gpio/msm_gpio.c | 20 + > drivers/gpio/qcom_pmic_gpio.c | 275 +- > drivers/mmc/msm_sdhci.c | 69 +- > drivers/phy/qcom/msm8916-usbh-phy.c | 4 +- > drivers/pinctrl/qcom/pinctrl-apq8016.c | 29 +- > drivers/pinctrl/qcom/pinctrl-apq8096.c | 16 +- > drivers/pinctrl/qcom/pinctrl-qcom.c | 12 + > drivers/pinctrl/qcom/pinctrl-qcs404.c | 58 +- > drivers/serial/Kconfig | 8 + > drivers/serial/serial_msm.c | 62 +- > drivers/usb/dwc3/dwc3-generic.c | 12 + > drivers/usb/host/ehci-msm.c | 22 +- > include/configs/dragonboard845c.h | 20 - > include/configs/qcom.h | 21 + > include/configs/qcs404-evb.h | 20 - > include/configs/sdm845.h | 26 - > include/dt-bindings/arm/coresight-cti-dt.h | 37 + > include/dt-bindings/clock/qcom,camcc-sdm845.h | 116 + > include/dt-bindings/clock/qcom,dispcc-sdm845.h | 56 + > include/dt-bindings/clock/qcom,gcc-msm8916.h | 179 + > include/dt-bindings/clock/qcom,gcc-msm8996.h | 362 ++ > include/dt-bindings/clock/qcom,gpucc-sdm845.h | 24 + > include/dt-bindings/clock/qcom,lpass-sdm845.h | 15 + > include/dt-bindings/clock/qcom,mmcc-msm8996.h | 295 + > include/dt-bindings/clock/qcom,rpmcc.h | 174 + > include/dt-bindings/clock/qcom,rpmh.h | 37 + > include/dt-bindings/clock/qcom,turingcc-qcs404.h | 15 + > include/dt-bindings/clock/qcom,videocc-sdm845.h | 35 + > include/dt-bindings/dma/qcom-gpi.h | 11 + > include/dt-bindings/firmware/qcom,scm.h | 39 + > include/dt-bindings/iio/qcom,spmi-vadc.h | 300 + > include/dt-bindings/interconnect/qcom,msm8916.h | 100 + > .../dt-bindings/interconnect/qcom,msm8996-cbf.h | 12 + > include/dt-bindings/interconnect/qcom,msm8996.h | 163 + > include/dt-bindings/interconnect/qcom,osm-l3.h | 15 + > include/dt-bindings/interconnect/qcom,sdm845.h | 150 + > include/dt-bindings/phy/phy-qcom-qmp.h | 20 + > include/dt-bindings/phy/phy-qcom-qusb2.h | 37 + > include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 164 + > include/dt-bindings/pinctrl/qcom,pmic-mpp.h | 106 + > include/dt-bindings/power/qcom-rpmpd.h | 412 ++ > .../dt-bindings/regulator/qcom,rpmh-regulator.h | 36 + > include/dt-bindings/reset/qcom,gcc-msm8916.h | 100 + > include/dt-bindings/reset/qcom,sdm845-aoss.h | 17 + > include/dt-bindings/reset/qcom,sdm845-pdc.h | 22 + > include/dt-bindings/soc/qcom,apr.h | 28 + > include/dt-bindings/soc/qcom,rpmh-rsc.h | 14 + > include/dt-bindings/sound/apq8016-lpass.h | 9 + > include/dt-bindings/sound/qcom,lpass.h | 46 + > include/dt-bindings/sound/qcom,q6afe.h | 9 + > include/dt-bindings/sound/qcom,q6asm.h | 26 + > include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h | 234 + > include/dt-bindings/sound/qcom,wcd9335.h | 15 + > include/init.h | 11 + > 134 files changed, 23997 insertions(+), 2643 deletions(-) > --- > base-commit: 22f391e8be11986bae824509470cf11e7bac31b0 > > // Caleb (they/them) >