All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sumit Garg <sumit.garg@linaro.org>
To: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Tom Rini <trini@konsulko.com>,
	Caleb Connolly <caleb.connolly@linaro.org>,
	u-boot@lists.denx.de
Subject: Re: [PATCH 1/3] pinctrl: qcom: Add SM8550 pinctrl driver
Date: Wed, 10 Apr 2024 15:28:42 +0530	[thread overview]
Message-ID: <CAFA6WYPb0LKbMa0ZXMb7Yr0T+RRg==48HuCBbmoNb2gz9eUSmA@mail.gmail.com> (raw)
In-Reply-To: <20240405-topic-sm8x50-pinctrl-v1-1-92d563c28c90@linaro.org>

On Fri, 5 Apr 2024 at 13:45, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>
> Add pinctrl driver for the TLMM block found in the SM8550 SoC.
>
> This driver only handles the gpio and qup1_se7 pinmux, and makes sure
> the pinconf applies on SDC2 pins.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  drivers/pinctrl/qcom/Kconfig          |  7 ++++
>  drivers/pinctrl/qcom/Makefile         |  1 +
>  drivers/pinctrl/qcom/pinctrl-sm8550.c | 75 +++++++++++++++++++++++++++++++++++
>  3 files changed, 83 insertions(+)
>

Acked-by: Sumit Garg <sumit.garg@linaro.org>

-Sumit

> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index 2fe63981478..f760bbcdd52 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -41,6 +41,13 @@ config PINCTRL_QCOM_SDM845
>           Say Y here to enable support for pinctrl on the Snapdragon 845 SoC,
>           as well as the associated GPIO driver.
>
> +config PINCTRL_QCOM_SM8550
> +       bool "Qualcomm SM8550 GCC"
> +       select PINCTRL_QCOM
> +       help
> +         Say Y here to enable support for pinctrl on the Snapdragon SM8550 SoC,
> +         as well as the associated GPIO driver.
> +
>  endmenu
>
>  endif
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index 6d9aca6d7b7..970902e28c8 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_PINCTRL_QCOM_IPQ4019) += pinctrl-ipq4019.o
>  obj-$(CONFIG_PINCTRL_QCOM_APQ8096) += pinctrl-apq8096.o
>  obj-$(CONFIG_PINCTRL_QCOM_QCS404) += pinctrl-qcs404.o
>  obj-$(CONFIG_PINCTRL_QCOM_SDM845) += pinctrl-sdm845.o
> +obj-$(CONFIG_PINCTRL_QCOM_SM8550) += pinctrl-sm8550.o
> diff --git a/drivers/pinctrl/qcom/pinctrl-sm8550.c b/drivers/pinctrl/qcom/pinctrl-sm8550.c
> new file mode 100644
> index 00000000000..d9a8a652111
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-sm8550.c
> @@ -0,0 +1,75 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Qualcomm sm8550 pinctrl
> + *
> + * (C) Copyright 2024 Linaro Ltd.
> + *
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +
> +#include "pinctrl-qcom.h"
> +
> +#define MAX_PIN_NAME_LEN 32
> +static char pin_name[MAX_PIN_NAME_LEN] __section(".data");
> +
> +static const struct pinctrl_function msm_pinctrl_functions[] = {
> +       {"qup1_se7", 1},
> +       {"gpio", 0},
> +};
> +
> +static const char *sm8550_get_function_name(struct udevice *dev,
> +                                                unsigned int selector)
> +{
> +       return msm_pinctrl_functions[selector].name;
> +}
> +
> +static const char *sm8550_get_pin_name(struct udevice *dev,
> +                                       unsigned int selector)
> +{
> +       static const char *special_pins_names[] = {
> +               "ufs_reset",
> +               "sdc2_clk",
> +               "sdc2_cmd",
> +               "sdc2_data",
> +       };
> +
> +       if (selector >= 210 && selector <= 213)
> +               snprintf(pin_name, MAX_PIN_NAME_LEN, special_pins_names[selector - 210]);
> +       else
> +               snprintf(pin_name, MAX_PIN_NAME_LEN, "gpio%u", selector);
> +
> +       return pin_name;
> +}
> +
> +static unsigned int sm8550_get_function_mux(__maybe_unused unsigned int pin,
> +                                           unsigned int selector)
> +{
> +       return msm_pinctrl_functions[selector].val;
> +}
> +
> +static struct msm_pinctrl_data sm8550_data = {
> +       .pin_data = {
> +               .pin_count = 214,
> +               .special_pins_start = 210,
> +       },
> +       .functions_count = ARRAY_SIZE(msm_pinctrl_functions),
> +       .get_function_name = sm8550_get_function_name,
> +       .get_function_mux = sm8550_get_function_mux,
> +       .get_pin_name = sm8550_get_pin_name,
> +};
> +
> +static const struct udevice_id msm_pinctrl_ids[] = {
> +       { .compatible = "qcom,sm8550-tlmm", .data = (ulong)&sm8550_data },
> +       { /* Sentinel */ }
> +};
> +
> +U_BOOT_DRIVER(pinctrl_sm8550) = {
> +       .name           = "pinctrl_sm8550",
> +       .id             = UCLASS_NOP,
> +       .of_match       = msm_pinctrl_ids,
> +       .ops            = &msm_pinctrl_ops,
> +       .bind           = msm_pinctrl_bind,
> +};
> +
>
> --
> 2.34.1
>

  reply	other threads:[~2024-04-10  9:59 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-05  8:15 [PATCH 0/3] qcom: add pinctrl driver for SM8550 and SM8650 Neil Armstrong
2024-04-05  8:15 ` [PATCH 1/3] pinctrl: qcom: Add SM8550 pinctrl driver Neil Armstrong
2024-04-10  9:58   ` Sumit Garg [this message]
2024-04-05  8:15 ` [PATCH 2/3] pinctrl: qcom: Add SM8650 " Neil Armstrong
2024-04-10 10:00   ` Sumit Garg
2024-04-05  8:15 ` [PATCH 3/3] qcom_defconfig: enable SM8550 & " Neil Armstrong
2024-04-10 10:00   ` Sumit Garg
2024-04-05 15:47 ` [PATCH 0/3] qcom: add pinctrl driver for SM8550 and SM8650 Caleb Connolly
2024-04-11 12:43 ` Caleb Connolly

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAFA6WYPb0LKbMa0ZXMb7Yr0T+RRg==48HuCBbmoNb2gz9eUSmA@mail.gmail.com' \
    --to=sumit.garg@linaro.org \
    --cc=caleb.connolly@linaro.org \
    --cc=neil.armstrong@linaro.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.