From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Sat, 27 May 2017 16:15:25 +0200 Subject: Testing. In-Reply-To: <743c82c3-52af-bcdb-b45a-d392cda08fb6@o2online.de> References: <743c82c3-52af-bcdb-b45a-d392cda08fb6@o2online.de> Message-ID: To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Hi Tobias, On Thu, May 25, 2017 at 8:35 PM, Tobias Baumann <017623705678@o2online.de> wrote: > hi martin > > oleg (balbes150) from armbian forum told me you could need some help > > iam new to linux but i can test images and files for you > > my system OTT M8S Clone TVBox with S812 8GBRom 2GB RAM RTL8723BS WIFI BT > Combo HDMI 2xUSB > > ( run as server for USB Printer and Sane server for canon scanner) > > at the moment i use the armbian unbuntu rom from oleg with 3.10.99 kernel > (14 04 2017 ) with working wifi usb and internet also i could run a > successful test the 4.11 kernel disclaimer: I cannot really help with Amlogic's 3.10/3.14 kernel > my project now is to control the front LED what are you trying to control exactly? > but there is a problem oleg send my the dts for led but without gpio . my m8s.dts doesn't use a GPIO because the LED is connected to GPIO_TEST_N which can also be controlled by one of the PWM controllers (this allows dimming the LED to a certain level, but in my case the LED is a dual-color LED with blue and red: the further you reduce the brightness of the (blue) LED the more you see of the red one -> if you turn off the blue LED it turns red) > maybe you can assist > > thanks Tobias > > PS: i am from Germany so i am more comfortable and faster in german > > > --- > Diese E-Mail wurde von Avast Antivirus-Software auf Viren gepr?ft. > https://www.avast.com/antivirus > > > > _______________________________________________ > linux-amlogic mailing list > linux-amlogic at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-amlogic