[PATCH v1 1/3] iio: adc: meson_saradc: Convert to use dev_err_probe()

[PATCH v1 1/3] iio: adc: meson_saradc: Convert to use dev_err_probe()

[Andy Shevchenko]

It's fine to call dev_err_probe() in ->probe() when error code is known.
Convert the driver to use dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/adc/meson_saradc.c | 51 ++++++++++++----------------------
 1 file changed, 18 insertions(+), 33 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 62cc6fb0ef85..c2abbfc1396c 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -701,6 +701,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
 	u8 *buf, trimming_bits, trimming_mask, upper_adc_val;
+	struct device *dev = indio_dev->dev.parent;
 	struct nvmem_cell *temperature_calib;
 	size_t read_len;
 	int ret;
@@ -717,30 +718,22 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 		if (ret == -ENODEV)
 			return 0;
 
-		return dev_err_probe(indio_dev->dev.parent, ret,
-				     "failed to get temperature_calib cell\n");
+		return dev_err_probe(dev, ret, "failed to get temperature_calib cell\n");
 	}
 
 	priv->tsc_regmap =
 		syscon_regmap_lookup_by_phandle(indio_dev->dev.parent->of_node,
 						"amlogic,hhi-sysctrl");
-	if (IS_ERR(priv->tsc_regmap)) {
-		dev_err(indio_dev->dev.parent,
-			"failed to get amlogic,hhi-sysctrl regmap\n");
-		return PTR_ERR(priv->tsc_regmap);
-	}
+	if (IS_ERR(priv->tsc_regmap))
+		return dev_err_probe(dev, PTR_ERR(priv->tsc_regmap), "failed to get amlogic,hhi-sysctrl regmap\n");
 
 	read_len = MESON_SAR_ADC_EFUSE_BYTES;
 	buf = nvmem_cell_read(temperature_calib, &read_len);
-	if (IS_ERR(buf)) {
-		dev_err(indio_dev->dev.parent,
-			"failed to read temperature_calib cell\n");
-		return PTR_ERR(buf);
-	} else if (read_len != MESON_SAR_ADC_EFUSE_BYTES) {
+	if (IS_ERR(buf))
+		return dev_err_probe(dev, PTR_ERR(buf), "failed to read temperature_calib cell\n");
+	if (read_len != MESON_SAR_ADC_EFUSE_BYTES) {
 		kfree(buf);
-		dev_err(indio_dev->dev.parent,
-			"invalid read size of temperature_calib cell\n");
-		return -EINVAL;
+		return dev_err_probe(dev, -EINVAL, "invalid read size of temperature_calib cell\n");
 	}
 
 	trimming_bits = priv->param->temperature_trimming_bits;
@@ -765,6 +758,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 static int meson_sar_adc_init(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int regval, i, ret;
 
 	/*
@@ -888,18 +882,12 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 	}
 
 	ret = clk_set_parent(priv->adc_sel_clk, priv->clkin);
-	if (ret) {
-		dev_err(indio_dev->dev.parent,
-			"failed to set adc parent to clkin\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to set adc parent to clkin\n");
 
 	ret = clk_set_rate(priv->adc_clk, priv->param->clock_rate);
-	if (ret) {
-		dev_err(indio_dev->dev.parent,
-			"failed to set adc clock rate\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to set adc clock rate\n");
 
 	return 0;
 }
@@ -1186,24 +1174,21 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 {
 	const struct meson_sar_adc_data *match_data;
 	struct meson_sar_adc_priv *priv;
+	struct device *dev = &pdev->dev;
 	struct iio_dev *indio_dev;
 	void __iomem *base;
 	int irq, ret;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
-	if (!indio_dev) {
-		dev_err(&pdev->dev, "failed allocating iio device\n");
-		return -ENOMEM;
-	}
+	if (!indio_dev)
+		return dev_err_probe(dev, -ENOMEM, "failed allocating iio device\n");
 
 	priv = iio_priv(indio_dev);
 	init_completion(&priv->done);
 
 	match_data = of_device_get_match_data(&pdev->dev);
-	if (!match_data) {
-		dev_err(&pdev->dev, "failed to get match data\n");
-		return -ENODEV;
-	}
+	if (!match_data)
+		return dev_err_probe(dev, -ENODEV, "failed to get match data\n");
 
 	priv->param = match_data->param;
 
-- 
2.35.1

[PATCH v1 1/3] iio: adc: meson_saradc: Convert to use dev_err_probe()

[Andy Shevchenko]

It's fine to call dev_err_probe() in ->probe() when error code is known.
Convert the driver to use dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/adc/meson_saradc.c | 51 ++++++++++++----------------------
 1 file changed, 18 insertions(+), 33 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 62cc6fb0ef85..c2abbfc1396c 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -701,6 +701,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
 	u8 *buf, trimming_bits, trimming_mask, upper_adc_val;
+	struct device *dev = indio_dev->dev.parent;
 	struct nvmem_cell *temperature_calib;
 	size_t read_len;
 	int ret;
@@ -717,30 +718,22 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 		if (ret == -ENODEV)
 			return 0;
 
-		return dev_err_probe(indio_dev->dev.parent, ret,
-				     "failed to get temperature_calib cell\n");
+		return dev_err_probe(dev, ret, "failed to get temperature_calib cell\n");
 	}
 
 	priv->tsc_regmap =
 		syscon_regmap_lookup_by_phandle(indio_dev->dev.parent->of_node,
 						"amlogic,hhi-sysctrl");
-	if (IS_ERR(priv->tsc_regmap)) {
-		dev_err(indio_dev->dev.parent,
-			"failed to get amlogic,hhi-sysctrl regmap\n");
-		return PTR_ERR(priv->tsc_regmap);
-	}
+	if (IS_ERR(priv->tsc_regmap))
+		return dev_err_probe(dev, PTR_ERR(priv->tsc_regmap), "failed to get amlogic,hhi-sysctrl regmap\n");
 
 	read_len = MESON_SAR_ADC_EFUSE_BYTES;
 	buf = nvmem_cell_read(temperature_calib, &read_len);
-	if (IS_ERR(buf)) {
-		dev_err(indio_dev->dev.parent,
-			"failed to read temperature_calib cell\n");
-		return PTR_ERR(buf);
-	} else if (read_len != MESON_SAR_ADC_EFUSE_BYTES) {
+	if (IS_ERR(buf))
+		return dev_err_probe(dev, PTR_ERR(buf), "failed to read temperature_calib cell\n");
+	if (read_len != MESON_SAR_ADC_EFUSE_BYTES) {
 		kfree(buf);
-		dev_err(indio_dev->dev.parent,
-			"invalid read size of temperature_calib cell\n");
-		return -EINVAL;
+		return dev_err_probe(dev, -EINVAL, "invalid read size of temperature_calib cell\n");
 	}
 
 	trimming_bits = priv->param->temperature_trimming_bits;
@@ -765,6 +758,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 static int meson_sar_adc_init(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int regval, i, ret;
 
 	/*
@@ -888,18 +882,12 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 	}
 
 	ret = clk_set_parent(priv->adc_sel_clk, priv->clkin);
-	if (ret) {
-		dev_err(indio_dev->dev.parent,
-			"failed to set adc parent to clkin\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to set adc parent to clkin\n");
 
 	ret = clk_set_rate(priv->adc_clk, priv->param->clock_rate);
-	if (ret) {
-		dev_err(indio_dev->dev.parent,
-			"failed to set adc clock rate\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to set adc clock rate\n");
 
 	return 0;
 }
@@ -1186,24 +1174,21 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 {
 	const struct meson_sar_adc_data *match_data;
 	struct meson_sar_adc_priv *priv;
+	struct device *dev = &pdev->dev;
 	struct iio_dev *indio_dev;
 	void __iomem *base;
 	int irq, ret;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
-	if (!indio_dev) {
-		dev_err(&pdev->dev, "failed allocating iio device\n");
-		return -ENOMEM;
-	}
+	if (!indio_dev)
+		return dev_err_probe(dev, -ENOMEM, "failed allocating iio device\n");
 
 	priv = iio_priv(indio_dev);
 	init_completion(&priv->done);
 
 	match_data = of_device_get_match_data(&pdev->dev);
-	if (!match_data) {
-		dev_err(&pdev->dev, "failed to get match data\n");
-		return -ENODEV;
-	}
+	if (!match_data)
+		return dev_err_probe(dev, -ENODEV, "failed to get match data\n");
 
 	priv->param = match_data->param;
 
-- 
2.35.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v1 1/3] iio: adc: meson_saradc: Convert to use dev_err_probe()

[Andy Shevchenko]

It's fine to call dev_err_probe() in ->probe() when error code is known.
Convert the driver to use dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/adc/meson_saradc.c | 51 ++++++++++++----------------------
 1 file changed, 18 insertions(+), 33 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 62cc6fb0ef85..c2abbfc1396c 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -701,6 +701,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
 	u8 *buf, trimming_bits, trimming_mask, upper_adc_val;
+	struct device *dev = indio_dev->dev.parent;
 	struct nvmem_cell *temperature_calib;
 	size_t read_len;
 	int ret;
@@ -717,30 +718,22 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 		if (ret == -ENODEV)
 			return 0;
 
-		return dev_err_probe(indio_dev->dev.parent, ret,
-				     "failed to get temperature_calib cell\n");
+		return dev_err_probe(dev, ret, "failed to get temperature_calib cell\n");
 	}
 
 	priv->tsc_regmap =
 		syscon_regmap_lookup_by_phandle(indio_dev->dev.parent->of_node,
 						"amlogic,hhi-sysctrl");
-	if (IS_ERR(priv->tsc_regmap)) {
-		dev_err(indio_dev->dev.parent,
-			"failed to get amlogic,hhi-sysctrl regmap\n");
-		return PTR_ERR(priv->tsc_regmap);
-	}
+	if (IS_ERR(priv->tsc_regmap))
+		return dev_err_probe(dev, PTR_ERR(priv->tsc_regmap), "failed to get amlogic,hhi-sysctrl regmap\n");
 
 	read_len = MESON_SAR_ADC_EFUSE_BYTES;
 	buf = nvmem_cell_read(temperature_calib, &read_len);
-	if (IS_ERR(buf)) {
-		dev_err(indio_dev->dev.parent,
-			"failed to read temperature_calib cell\n");
-		return PTR_ERR(buf);
-	} else if (read_len != MESON_SAR_ADC_EFUSE_BYTES) {
+	if (IS_ERR(buf))
+		return dev_err_probe(dev, PTR_ERR(buf), "failed to read temperature_calib cell\n");
+	if (read_len != MESON_SAR_ADC_EFUSE_BYTES) {
 		kfree(buf);
-		dev_err(indio_dev->dev.parent,
-			"invalid read size of temperature_calib cell\n");
-		return -EINVAL;
+		return dev_err_probe(dev, -EINVAL, "invalid read size of temperature_calib cell\n");
 	}
 
 	trimming_bits = priv->param->temperature_trimming_bits;
@@ -765,6 +758,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 static int meson_sar_adc_init(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int regval, i, ret;
 
 	/*
@@ -888,18 +882,12 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 	}
 
 	ret = clk_set_parent(priv->adc_sel_clk, priv->clkin);
-	if (ret) {
-		dev_err(indio_dev->dev.parent,
-			"failed to set adc parent to clkin\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to set adc parent to clkin\n");
 
 	ret = clk_set_rate(priv->adc_clk, priv->param->clock_rate);
-	if (ret) {
-		dev_err(indio_dev->dev.parent,
-			"failed to set adc clock rate\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to set adc clock rate\n");
 
 	return 0;
 }
@@ -1186,24 +1174,21 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 {
 	const struct meson_sar_adc_data *match_data;
 	struct meson_sar_adc_priv *priv;
+	struct device *dev = &pdev->dev;
 	struct iio_dev *indio_dev;
 	void __iomem *base;
 	int irq, ret;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
-	if (!indio_dev) {
-		dev_err(&pdev->dev, "failed allocating iio device\n");
-		return -ENOMEM;
-	}
+	if (!indio_dev)
+		return dev_err_probe(dev, -ENOMEM, "failed allocating iio device\n");
 
 	priv = iio_priv(indio_dev);
 	init_completion(&priv->done);
 
 	match_data = of_device_get_match_data(&pdev->dev);
-	if (!match_data) {
-		dev_err(&pdev->dev, "failed to get match data\n");
-		return -ENODEV;
-	}
+	if (!match_data)
+		return dev_err_probe(dev, -ENODEV, "failed to get match data\n");
 
 	priv->param = match_data->param;
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 2/3] iio: adc: meson_saradc: Use devm_clk_get_optional()

[Andy Shevchenko]

Replace open coded variants of devm_clk_get_optional().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/adc/meson_saradc.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index c2abbfc1396c..2fa384e59d28 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -1224,23 +1224,13 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 		return dev_err_probe(&pdev->dev, PTR_ERR(priv->core_clk),
 				     "failed to get core clk\n");
 
-	priv->adc_clk = devm_clk_get(&pdev->dev, "adc_clk");
-	if (IS_ERR(priv->adc_clk)) {
-		if (PTR_ERR(priv->adc_clk) == -ENOENT)
-			priv->adc_clk = NULL;
-		else
-			return dev_err_probe(&pdev->dev, PTR_ERR(priv->adc_clk),
-					     "failed to get adc clk\n");
-	}
+	priv->adc_clk = devm_clk_get_optional(dev, "adc_clk");
+	if (IS_ERR(priv->adc_clk))
+		return dev_err_probe(dev, PTR_ERR(priv->adc_clk), "failed to get adc clk\n");
 
-	priv->adc_sel_clk = devm_clk_get(&pdev->dev, "adc_sel");
-	if (IS_ERR(priv->adc_sel_clk)) {
-		if (PTR_ERR(priv->adc_sel_clk) == -ENOENT)
-			priv->adc_sel_clk = NULL;
-		else
-			return dev_err_probe(&pdev->dev, PTR_ERR(priv->adc_sel_clk),
-					     "failed to get adc_sel clk\n");
-	}
+	priv->adc_sel_clk = devm_clk_get_optional(dev, "adc_sel");
+	if (IS_ERR(priv->adc_sel_clk))
+		return dev_err_probe(dev, PTR_ERR(priv->adc_sel_clk), "failed to get adc_sel clk\n");
 
 	/* on pre-GXBB SoCs the SAR ADC itself provides the ADC clock: */
 	if (!priv->adc_clk) {
-- 
2.35.1

[PATCH v1 2/3] iio: adc: meson_saradc: Use devm_clk_get_optional()

[Andy Shevchenko]

Replace open coded variants of devm_clk_get_optional().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/adc/meson_saradc.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index c2abbfc1396c..2fa384e59d28 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -1224,23 +1224,13 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 		return dev_err_probe(&pdev->dev, PTR_ERR(priv->core_clk),
 				     "failed to get core clk\n");
 
-	priv->adc_clk = devm_clk_get(&pdev->dev, "adc_clk");
-	if (IS_ERR(priv->adc_clk)) {
-		if (PTR_ERR(priv->adc_clk) == -ENOENT)
-			priv->adc_clk = NULL;
-		else
-			return dev_err_probe(&pdev->dev, PTR_ERR(priv->adc_clk),
-					     "failed to get adc clk\n");
-	}
+	priv->adc_clk = devm_clk_get_optional(dev, "adc_clk");
+	if (IS_ERR(priv->adc_clk))
+		return dev_err_probe(dev, PTR_ERR(priv->adc_clk), "failed to get adc clk\n");
 
-	priv->adc_sel_clk = devm_clk_get(&pdev->dev, "adc_sel");
-	if (IS_ERR(priv->adc_sel_clk)) {
-		if (PTR_ERR(priv->adc_sel_clk) == -ENOENT)
-			priv->adc_sel_clk = NULL;
-		else
-			return dev_err_probe(&pdev->dev, PTR_ERR(priv->adc_sel_clk),
-					     "failed to get adc_sel clk\n");
-	}
+	priv->adc_sel_clk = devm_clk_get_optional(dev, "adc_sel");
+	if (IS_ERR(priv->adc_sel_clk))
+		return dev_err_probe(dev, PTR_ERR(priv->adc_sel_clk), "failed to get adc_sel clk\n");
 
 	/* on pre-GXBB SoCs the SAR ADC itself provides the ADC clock: */
 	if (!priv->adc_clk) {
-- 
2.35.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v1 2/3] iio: adc: meson_saradc: Use devm_clk_get_optional()

[Andy Shevchenko]

Replace open coded variants of devm_clk_get_optional().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/adc/meson_saradc.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index c2abbfc1396c..2fa384e59d28 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -1224,23 +1224,13 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 		return dev_err_probe(&pdev->dev, PTR_ERR(priv->core_clk),
 				     "failed to get core clk\n");
 
-	priv->adc_clk = devm_clk_get(&pdev->dev, "adc_clk");
-	if (IS_ERR(priv->adc_clk)) {
-		if (PTR_ERR(priv->adc_clk) == -ENOENT)
-			priv->adc_clk = NULL;
-		else
-			return dev_err_probe(&pdev->dev, PTR_ERR(priv->adc_clk),
-					     "failed to get adc clk\n");
-	}
+	priv->adc_clk = devm_clk_get_optional(dev, "adc_clk");
+	if (IS_ERR(priv->adc_clk))
+		return dev_err_probe(dev, PTR_ERR(priv->adc_clk), "failed to get adc clk\n");
 
-	priv->adc_sel_clk = devm_clk_get(&pdev->dev, "adc_sel");
-	if (IS_ERR(priv->adc_sel_clk)) {
-		if (PTR_ERR(priv->adc_sel_clk) == -ENOENT)
-			priv->adc_sel_clk = NULL;
-		else
-			return dev_err_probe(&pdev->dev, PTR_ERR(priv->adc_sel_clk),
-					     "failed to get adc_sel clk\n");
-	}
+	priv->adc_sel_clk = devm_clk_get_optional(dev, "adc_sel");
+	if (IS_ERR(priv->adc_sel_clk))
+		return dev_err_probe(dev, PTR_ERR(priv->adc_sel_clk), "failed to get adc_sel clk\n");
 
 	/* on pre-GXBB SoCs the SAR ADC itself provides the ADC clock: */
 	if (!priv->adc_clk) {
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[Andy Shevchenko]

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/adc/meson_saradc.c | 73 +++++++++++++++-------------------
 1 file changed, 31 insertions(+), 42 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 2fa384e59d28..4caab7af845a 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -345,6 +345,7 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
 					 int *val)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *idev = &indio_dev->dev;
 	int regval, fifo_chan, fifo_val, count;
 
 	if (!wait_for_completion_timeout(&priv->done,
@@ -353,16 +354,14 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
 
 	count = meson_sar_adc_get_fifo_count(indio_dev);
 	if (count != 1) {
-		dev_err(&indio_dev->dev,
-			"ADC FIFO has %d element(s) instead of one\n", count);
+		dev_err(idev, "ADC FIFO has %d element(s) instead of one\n", count);
 		return -EINVAL;
 	}
 
 	regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, &regval);
 	fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
 	if (fifo_chan != chan->address) {
-		dev_err(&indio_dev->dev,
-			"ADC FIFO entry belongs to channel %d instead of %lu\n",
+		dev_err(idev, "ADC FIFO entry belongs to channel %d instead of %lu\n",
 			fifo_chan, chan->address);
 		return -EINVAL;
 	}
@@ -550,6 +549,7 @@ static int meson_sar_adc_get_sample(struct iio_dev *indio_dev,
 				    int *val)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int ret;
 
 	if (chan->type == IIO_TEMP && !priv->temperature_sensor_calibrated)
@@ -573,8 +573,7 @@ static int meson_sar_adc_get_sample(struct iio_dev *indio_dev,
 	meson_sar_adc_unlock(indio_dev);
 
 	if (ret) {
-		dev_warn(indio_dev->dev.parent,
-			 "failed to read sample for channel %lu: %d\n",
+		dev_warn(dev, "failed to read sample for channel %lu: %d\n",
 			 chan->address, ret);
 		return ret;
 	}
@@ -587,6 +586,7 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
 					   int *val, int *val2, long mask)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int ret;
 
 	switch (mask) {
@@ -603,9 +603,7 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
 		if (chan->type == IIO_VOLTAGE) {
 			ret = regulator_get_voltage(priv->vref);
 			if (ret < 0) {
-				dev_err(indio_dev->dev.parent,
-					"failed to get vref voltage: %d\n",
-					ret);
+				dev_err(dev, "failed to get vref voltage: %d\n", ret);
 				return ret;
 			}
 
@@ -650,11 +648,12 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 				  void __iomem *base)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *idev = &indio_dev->dev;
+	struct device *dev = dev->parent;
 	struct clk_init_data init;
 	const char *clk_parents[1];
 
-	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_div",
-				   dev_name(indio_dev->dev.parent));
+	init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_div", dev_name(dev));
 	if (!init.name)
 		return -ENOMEM;
 
@@ -670,13 +669,11 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	priv->clk_div.hw.init = &init;
 	priv->clk_div.flags = 0;
 
-	priv->adc_div_clk = devm_clk_register(&indio_dev->dev,
-					      &priv->clk_div.hw);
+	priv->adc_div_clk = devm_clk_register(idev, &priv->clk_div.hw);
 	if (WARN_ON(IS_ERR(priv->adc_div_clk)))
 		return PTR_ERR(priv->adc_div_clk);
 
-	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_en",
-				   dev_name(indio_dev->dev.parent));
+	init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_en", dev_name(dev));
 	if (!init.name)
 		return -ENOMEM;
 
@@ -690,7 +687,7 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	priv->clk_gate.bit_idx = __ffs(MESON_SAR_ADC_REG3_CLK_EN);
 	priv->clk_gate.hw.init = &init;
 
-	priv->adc_clk = devm_clk_register(&indio_dev->dev, &priv->clk_gate.hw);
+	priv->adc_clk = devm_clk_register(idev, &priv->clk_gate.hw);
 	if (WARN_ON(IS_ERR(priv->adc_clk)))
 		return PTR_ERR(priv->adc_clk);
 
@@ -706,8 +703,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 	size_t read_len;
 	int ret;
 
-	temperature_calib = devm_nvmem_cell_get(indio_dev->dev.parent,
-						"temperature_calib");
+	temperature_calib = devm_nvmem_cell_get(dev, "temperature_calib");
 	if (IS_ERR(temperature_calib)) {
 		ret = PTR_ERR(temperature_calib);
 
@@ -721,9 +717,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 		return dev_err_probe(dev, ret, "failed to get temperature_calib cell\n");
 	}
 
-	priv->tsc_regmap =
-		syscon_regmap_lookup_by_phandle(indio_dev->dev.parent->of_node,
-						"amlogic,hhi-sysctrl");
+	priv->tsc_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "amlogic,hhi-sysctrl");
 	if (IS_ERR(priv->tsc_regmap))
 		return dev_err_probe(dev, PTR_ERR(priv->tsc_regmap), "failed to get amlogic,hhi-sysctrl regmap\n");
 
@@ -910,6 +904,7 @@ static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off)
 static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int ret;
 	u32 regval;
 
@@ -919,14 +914,13 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
 
 	ret = regulator_enable(priv->vref);
 	if (ret < 0) {
-		dev_err(indio_dev->dev.parent,
-			"failed to enable vref regulator\n");
+		dev_err(dev, "failed to enable vref regulator\n");
 		goto err_vref;
 	}
 
 	ret = clk_prepare_enable(priv->core_clk);
 	if (ret) {
-		dev_err(indio_dev->dev.parent, "failed to enable core clk\n");
+		dev_err(dev, "failed to enable core clk\n");
 		goto err_core_clk;
 	}
 
@@ -944,7 +938,7 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
 
 	ret = clk_prepare_enable(priv->adc_clk);
 	if (ret) {
-		dev_err(indio_dev->dev.parent, "failed to enable adc clk\n");
+		dev_err(dev, "failed to enable adc clk\n");
 		goto err_adc_clk;
 	}
 
@@ -1179,14 +1173,14 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	void __iomem *base;
 	int irq, ret;
 
-	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
 	if (!indio_dev)
 		return dev_err_probe(dev, -ENOMEM, "failed allocating iio device\n");
 
 	priv = iio_priv(indio_dev);
 	init_completion(&priv->done);
 
-	match_data = of_device_get_match_data(&pdev->dev);
+	match_data = of_device_get_match_data(dev);
 	if (!match_data)
 		return dev_err_probe(dev, -ENODEV, "failed to get match data\n");
 
@@ -1200,29 +1194,25 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
-	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
-					     priv->param->regmap_config);
+	priv->regmap = devm_regmap_init_mmio(dev, base, priv->param->regmap_config);
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
 
-	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	irq = irq_of_parse_and_map(dev->of_node, 0);
 	if (!irq)
 		return -EINVAL;
 
-	ret = devm_request_irq(&pdev->dev, irq, meson_sar_adc_irq, IRQF_SHARED,
-			       dev_name(&pdev->dev), indio_dev);
+	ret = devm_request_irq(dev, irq, meson_sar_adc_irq, IRQF_SHARED, dev_name(dev), indio_dev);
 	if (ret)
 		return ret;
 
-	priv->clkin = devm_clk_get(&pdev->dev, "clkin");
+	priv->clkin = devm_clk_get(dev, "clkin");
 	if (IS_ERR(priv->clkin))
-		return dev_err_probe(&pdev->dev, PTR_ERR(priv->clkin),
-				     "failed to get clkin\n");
+		return dev_err_probe(dev, PTR_ERR(priv->clkin), "failed to get clkin\n");
 
-	priv->core_clk = devm_clk_get(&pdev->dev, "core");
+	priv->core_clk = devm_clk_get(dev, "core");
 	if (IS_ERR(priv->core_clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(priv->core_clk),
-				     "failed to get core clk\n");
+		return dev_err_probe(dev, PTR_ERR(priv->core_clk), "failed to get core clk\n");
 
 	priv->adc_clk = devm_clk_get_optional(dev, "adc_clk");
 	if (IS_ERR(priv->adc_clk))
@@ -1239,10 +1229,9 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	priv->vref = devm_regulator_get(&pdev->dev, "vref");
+	priv->vref = devm_regulator_get(dev, "vref");
 	if (IS_ERR(priv->vref))
-		return dev_err_probe(&pdev->dev, PTR_ERR(priv->vref),
-				     "failed to get vref regulator\n");
+		return dev_err_probe(dev, PTR_ERR(priv->vref), "failed to get vref regulator\n");
 
 	priv->calibscale = MILLION;
 
@@ -1272,7 +1261,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 
 	ret = meson_sar_adc_calib(indio_dev);
 	if (ret)
-		dev_warn(&pdev->dev, "calibration failed\n");
+		dev_warn(dev, "calibration failed\n");
 
 	platform_set_drvdata(pdev, indio_dev);
 
-- 
2.35.1

[PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[Andy Shevchenko]

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/adc/meson_saradc.c | 73 +++++++++++++++-------------------
 1 file changed, 31 insertions(+), 42 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 2fa384e59d28..4caab7af845a 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -345,6 +345,7 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
 					 int *val)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *idev = &indio_dev->dev;
 	int regval, fifo_chan, fifo_val, count;
 
 	if (!wait_for_completion_timeout(&priv->done,
@@ -353,16 +354,14 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
 
 	count = meson_sar_adc_get_fifo_count(indio_dev);
 	if (count != 1) {
-		dev_err(&indio_dev->dev,
-			"ADC FIFO has %d element(s) instead of one\n", count);
+		dev_err(idev, "ADC FIFO has %d element(s) instead of one\n", count);
 		return -EINVAL;
 	}
 
 	regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, &regval);
 	fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
 	if (fifo_chan != chan->address) {
-		dev_err(&indio_dev->dev,
-			"ADC FIFO entry belongs to channel %d instead of %lu\n",
+		dev_err(idev, "ADC FIFO entry belongs to channel %d instead of %lu\n",
 			fifo_chan, chan->address);
 		return -EINVAL;
 	}
@@ -550,6 +549,7 @@ static int meson_sar_adc_get_sample(struct iio_dev *indio_dev,
 				    int *val)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int ret;
 
 	if (chan->type == IIO_TEMP && !priv->temperature_sensor_calibrated)
@@ -573,8 +573,7 @@ static int meson_sar_adc_get_sample(struct iio_dev *indio_dev,
 	meson_sar_adc_unlock(indio_dev);
 
 	if (ret) {
-		dev_warn(indio_dev->dev.parent,
-			 "failed to read sample for channel %lu: %d\n",
+		dev_warn(dev, "failed to read sample for channel %lu: %d\n",
 			 chan->address, ret);
 		return ret;
 	}
@@ -587,6 +586,7 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
 					   int *val, int *val2, long mask)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int ret;
 
 	switch (mask) {
@@ -603,9 +603,7 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
 		if (chan->type == IIO_VOLTAGE) {
 			ret = regulator_get_voltage(priv->vref);
 			if (ret < 0) {
-				dev_err(indio_dev->dev.parent,
-					"failed to get vref voltage: %d\n",
-					ret);
+				dev_err(dev, "failed to get vref voltage: %d\n", ret);
 				return ret;
 			}
 
@@ -650,11 +648,12 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 				  void __iomem *base)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *idev = &indio_dev->dev;
+	struct device *dev = dev->parent;
 	struct clk_init_data init;
 	const char *clk_parents[1];
 
-	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_div",
-				   dev_name(indio_dev->dev.parent));
+	init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_div", dev_name(dev));
 	if (!init.name)
 		return -ENOMEM;
 
@@ -670,13 +669,11 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	priv->clk_div.hw.init = &init;
 	priv->clk_div.flags = 0;
 
-	priv->adc_div_clk = devm_clk_register(&indio_dev->dev,
-					      &priv->clk_div.hw);
+	priv->adc_div_clk = devm_clk_register(idev, &priv->clk_div.hw);
 	if (WARN_ON(IS_ERR(priv->adc_div_clk)))
 		return PTR_ERR(priv->adc_div_clk);
 
-	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_en",
-				   dev_name(indio_dev->dev.parent));
+	init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_en", dev_name(dev));
 	if (!init.name)
 		return -ENOMEM;
 
@@ -690,7 +687,7 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	priv->clk_gate.bit_idx = __ffs(MESON_SAR_ADC_REG3_CLK_EN);
 	priv->clk_gate.hw.init = &init;
 
-	priv->adc_clk = devm_clk_register(&indio_dev->dev, &priv->clk_gate.hw);
+	priv->adc_clk = devm_clk_register(idev, &priv->clk_gate.hw);
 	if (WARN_ON(IS_ERR(priv->adc_clk)))
 		return PTR_ERR(priv->adc_clk);
 
@@ -706,8 +703,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 	size_t read_len;
 	int ret;
 
-	temperature_calib = devm_nvmem_cell_get(indio_dev->dev.parent,
-						"temperature_calib");
+	temperature_calib = devm_nvmem_cell_get(dev, "temperature_calib");
 	if (IS_ERR(temperature_calib)) {
 		ret = PTR_ERR(temperature_calib);
 
@@ -721,9 +717,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 		return dev_err_probe(dev, ret, "failed to get temperature_calib cell\n");
 	}
 
-	priv->tsc_regmap =
-		syscon_regmap_lookup_by_phandle(indio_dev->dev.parent->of_node,
-						"amlogic,hhi-sysctrl");
+	priv->tsc_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "amlogic,hhi-sysctrl");
 	if (IS_ERR(priv->tsc_regmap))
 		return dev_err_probe(dev, PTR_ERR(priv->tsc_regmap), "failed to get amlogic,hhi-sysctrl regmap\n");
 
@@ -910,6 +904,7 @@ static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off)
 static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int ret;
 	u32 regval;
 
@@ -919,14 +914,13 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
 
 	ret = regulator_enable(priv->vref);
 	if (ret < 0) {
-		dev_err(indio_dev->dev.parent,
-			"failed to enable vref regulator\n");
+		dev_err(dev, "failed to enable vref regulator\n");
 		goto err_vref;
 	}
 
 	ret = clk_prepare_enable(priv->core_clk);
 	if (ret) {
-		dev_err(indio_dev->dev.parent, "failed to enable core clk\n");
+		dev_err(dev, "failed to enable core clk\n");
 		goto err_core_clk;
 	}
 
@@ -944,7 +938,7 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
 
 	ret = clk_prepare_enable(priv->adc_clk);
 	if (ret) {
-		dev_err(indio_dev->dev.parent, "failed to enable adc clk\n");
+		dev_err(dev, "failed to enable adc clk\n");
 		goto err_adc_clk;
 	}
 
@@ -1179,14 +1173,14 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	void __iomem *base;
 	int irq, ret;
 
-	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
 	if (!indio_dev)
 		return dev_err_probe(dev, -ENOMEM, "failed allocating iio device\n");
 
 	priv = iio_priv(indio_dev);
 	init_completion(&priv->done);
 
-	match_data = of_device_get_match_data(&pdev->dev);
+	match_data = of_device_get_match_data(dev);
 	if (!match_data)
 		return dev_err_probe(dev, -ENODEV, "failed to get match data\n");
 
@@ -1200,29 +1194,25 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
-	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
-					     priv->param->regmap_config);
+	priv->regmap = devm_regmap_init_mmio(dev, base, priv->param->regmap_config);
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
 
-	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	irq = irq_of_parse_and_map(dev->of_node, 0);
 	if (!irq)
 		return -EINVAL;
 
-	ret = devm_request_irq(&pdev->dev, irq, meson_sar_adc_irq, IRQF_SHARED,
-			       dev_name(&pdev->dev), indio_dev);
+	ret = devm_request_irq(dev, irq, meson_sar_adc_irq, IRQF_SHARED, dev_name(dev), indio_dev);
 	if (ret)
 		return ret;
 
-	priv->clkin = devm_clk_get(&pdev->dev, "clkin");
+	priv->clkin = devm_clk_get(dev, "clkin");
 	if (IS_ERR(priv->clkin))
-		return dev_err_probe(&pdev->dev, PTR_ERR(priv->clkin),
-				     "failed to get clkin\n");
+		return dev_err_probe(dev, PTR_ERR(priv->clkin), "failed to get clkin\n");
 
-	priv->core_clk = devm_clk_get(&pdev->dev, "core");
+	priv->core_clk = devm_clk_get(dev, "core");
 	if (IS_ERR(priv->core_clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(priv->core_clk),
-				     "failed to get core clk\n");
+		return dev_err_probe(dev, PTR_ERR(priv->core_clk), "failed to get core clk\n");
 
 	priv->adc_clk = devm_clk_get_optional(dev, "adc_clk");
 	if (IS_ERR(priv->adc_clk))
@@ -1239,10 +1229,9 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	priv->vref = devm_regulator_get(&pdev->dev, "vref");
+	priv->vref = devm_regulator_get(dev, "vref");
 	if (IS_ERR(priv->vref))
-		return dev_err_probe(&pdev->dev, PTR_ERR(priv->vref),
-				     "failed to get vref regulator\n");
+		return dev_err_probe(dev, PTR_ERR(priv->vref), "failed to get vref regulator\n");
 
 	priv->calibscale = MILLION;
 
@@ -1272,7 +1261,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 
 	ret = meson_sar_adc_calib(indio_dev);
 	if (ret)
-		dev_warn(&pdev->dev, "calibration failed\n");
+		dev_warn(dev, "calibration failed\n");
 
 	platform_set_drvdata(pdev, indio_dev);
 
-- 
2.35.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[Andy Shevchenko]

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/adc/meson_saradc.c | 73 +++++++++++++++-------------------
 1 file changed, 31 insertions(+), 42 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 2fa384e59d28..4caab7af845a 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -345,6 +345,7 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
 					 int *val)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *idev = &indio_dev->dev;
 	int regval, fifo_chan, fifo_val, count;
 
 	if (!wait_for_completion_timeout(&priv->done,
@@ -353,16 +354,14 @@ static int meson_sar_adc_read_raw_sample(struct iio_dev *indio_dev,
 
 	count = meson_sar_adc_get_fifo_count(indio_dev);
 	if (count != 1) {
-		dev_err(&indio_dev->dev,
-			"ADC FIFO has %d element(s) instead of one\n", count);
+		dev_err(idev, "ADC FIFO has %d element(s) instead of one\n", count);
 		return -EINVAL;
 	}
 
 	regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, &regval);
 	fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
 	if (fifo_chan != chan->address) {
-		dev_err(&indio_dev->dev,
-			"ADC FIFO entry belongs to channel %d instead of %lu\n",
+		dev_err(idev, "ADC FIFO entry belongs to channel %d instead of %lu\n",
 			fifo_chan, chan->address);
 		return -EINVAL;
 	}
@@ -550,6 +549,7 @@ static int meson_sar_adc_get_sample(struct iio_dev *indio_dev,
 				    int *val)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int ret;
 
 	if (chan->type == IIO_TEMP && !priv->temperature_sensor_calibrated)
@@ -573,8 +573,7 @@ static int meson_sar_adc_get_sample(struct iio_dev *indio_dev,
 	meson_sar_adc_unlock(indio_dev);
 
 	if (ret) {
-		dev_warn(indio_dev->dev.parent,
-			 "failed to read sample for channel %lu: %d\n",
+		dev_warn(dev, "failed to read sample for channel %lu: %d\n",
 			 chan->address, ret);
 		return ret;
 	}
@@ -587,6 +586,7 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
 					   int *val, int *val2, long mask)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int ret;
 
 	switch (mask) {
@@ -603,9 +603,7 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
 		if (chan->type == IIO_VOLTAGE) {
 			ret = regulator_get_voltage(priv->vref);
 			if (ret < 0) {
-				dev_err(indio_dev->dev.parent,
-					"failed to get vref voltage: %d\n",
-					ret);
+				dev_err(dev, "failed to get vref voltage: %d\n", ret);
 				return ret;
 			}
 
@@ -650,11 +648,12 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 				  void __iomem *base)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *idev = &indio_dev->dev;
+	struct device *dev = dev->parent;
 	struct clk_init_data init;
 	const char *clk_parents[1];
 
-	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_div",
-				   dev_name(indio_dev->dev.parent));
+	init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_div", dev_name(dev));
 	if (!init.name)
 		return -ENOMEM;
 
@@ -670,13 +669,11 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	priv->clk_div.hw.init = &init;
 	priv->clk_div.flags = 0;
 
-	priv->adc_div_clk = devm_clk_register(&indio_dev->dev,
-					      &priv->clk_div.hw);
+	priv->adc_div_clk = devm_clk_register(idev, &priv->clk_div.hw);
 	if (WARN_ON(IS_ERR(priv->adc_div_clk)))
 		return PTR_ERR(priv->adc_div_clk);
 
-	init.name = devm_kasprintf(&indio_dev->dev, GFP_KERNEL, "%s#adc_en",
-				   dev_name(indio_dev->dev.parent));
+	init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_en", dev_name(dev));
 	if (!init.name)
 		return -ENOMEM;
 
@@ -690,7 +687,7 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	priv->clk_gate.bit_idx = __ffs(MESON_SAR_ADC_REG3_CLK_EN);
 	priv->clk_gate.hw.init = &init;
 
-	priv->adc_clk = devm_clk_register(&indio_dev->dev, &priv->clk_gate.hw);
+	priv->adc_clk = devm_clk_register(idev, &priv->clk_gate.hw);
 	if (WARN_ON(IS_ERR(priv->adc_clk)))
 		return PTR_ERR(priv->adc_clk);
 
@@ -706,8 +703,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 	size_t read_len;
 	int ret;
 
-	temperature_calib = devm_nvmem_cell_get(indio_dev->dev.parent,
-						"temperature_calib");
+	temperature_calib = devm_nvmem_cell_get(dev, "temperature_calib");
 	if (IS_ERR(temperature_calib)) {
 		ret = PTR_ERR(temperature_calib);
 
@@ -721,9 +717,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
 		return dev_err_probe(dev, ret, "failed to get temperature_calib cell\n");
 	}
 
-	priv->tsc_regmap =
-		syscon_regmap_lookup_by_phandle(indio_dev->dev.parent->of_node,
-						"amlogic,hhi-sysctrl");
+	priv->tsc_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "amlogic,hhi-sysctrl");
 	if (IS_ERR(priv->tsc_regmap))
 		return dev_err_probe(dev, PTR_ERR(priv->tsc_regmap), "failed to get amlogic,hhi-sysctrl regmap\n");
 
@@ -910,6 +904,7 @@ static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off)
 static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
 	int ret;
 	u32 regval;
 
@@ -919,14 +914,13 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
 
 	ret = regulator_enable(priv->vref);
 	if (ret < 0) {
-		dev_err(indio_dev->dev.parent,
-			"failed to enable vref regulator\n");
+		dev_err(dev, "failed to enable vref regulator\n");
 		goto err_vref;
 	}
 
 	ret = clk_prepare_enable(priv->core_clk);
 	if (ret) {
-		dev_err(indio_dev->dev.parent, "failed to enable core clk\n");
+		dev_err(dev, "failed to enable core clk\n");
 		goto err_core_clk;
 	}
 
@@ -944,7 +938,7 @@ static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
 
 	ret = clk_prepare_enable(priv->adc_clk);
 	if (ret) {
-		dev_err(indio_dev->dev.parent, "failed to enable adc clk\n");
+		dev_err(dev, "failed to enable adc clk\n");
 		goto err_adc_clk;
 	}
 
@@ -1179,14 +1173,14 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	void __iomem *base;
 	int irq, ret;
 
-	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
 	if (!indio_dev)
 		return dev_err_probe(dev, -ENOMEM, "failed allocating iio device\n");
 
 	priv = iio_priv(indio_dev);
 	init_completion(&priv->done);
 
-	match_data = of_device_get_match_data(&pdev->dev);
+	match_data = of_device_get_match_data(dev);
 	if (!match_data)
 		return dev_err_probe(dev, -ENODEV, "failed to get match data\n");
 
@@ -1200,29 +1194,25 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
-	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
-					     priv->param->regmap_config);
+	priv->regmap = devm_regmap_init_mmio(dev, base, priv->param->regmap_config);
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
 
-	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	irq = irq_of_parse_and_map(dev->of_node, 0);
 	if (!irq)
 		return -EINVAL;
 
-	ret = devm_request_irq(&pdev->dev, irq, meson_sar_adc_irq, IRQF_SHARED,
-			       dev_name(&pdev->dev), indio_dev);
+	ret = devm_request_irq(dev, irq, meson_sar_adc_irq, IRQF_SHARED, dev_name(dev), indio_dev);
 	if (ret)
 		return ret;
 
-	priv->clkin = devm_clk_get(&pdev->dev, "clkin");
+	priv->clkin = devm_clk_get(dev, "clkin");
 	if (IS_ERR(priv->clkin))
-		return dev_err_probe(&pdev->dev, PTR_ERR(priv->clkin),
-				     "failed to get clkin\n");
+		return dev_err_probe(dev, PTR_ERR(priv->clkin), "failed to get clkin\n");
 
-	priv->core_clk = devm_clk_get(&pdev->dev, "core");
+	priv->core_clk = devm_clk_get(dev, "core");
 	if (IS_ERR(priv->core_clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(priv->core_clk),
-				     "failed to get core clk\n");
+		return dev_err_probe(dev, PTR_ERR(priv->core_clk), "failed to get core clk\n");
 
 	priv->adc_clk = devm_clk_get_optional(dev, "adc_clk");
 	if (IS_ERR(priv->adc_clk))
@@ -1239,10 +1229,9 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	priv->vref = devm_regulator_get(&pdev->dev, "vref");
+	priv->vref = devm_regulator_get(dev, "vref");
 	if (IS_ERR(priv->vref))
-		return dev_err_probe(&pdev->dev, PTR_ERR(priv->vref),
-				     "failed to get vref regulator\n");
+		return dev_err_probe(dev, PTR_ERR(priv->vref), "failed to get vref regulator\n");
 
 	priv->calibscale = MILLION;
 
@@ -1272,7 +1261,7 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 
 	ret = meson_sar_adc_calib(indio_dev);
 	if (ret)
-		dev_warn(&pdev->dev, "calibration failed\n");
+		dev_warn(dev, "calibration failed\n");
 
 	platform_set_drvdata(pdev, indio_dev);
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 2/3] iio: adc: meson_saradc: Use devm_clk_get_optional()

[Martin Blumenstingl]

On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> Replace open coded variants of devm_clk_get_optional().
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Re: [PATCH v1 2/3] iio: adc: meson_saradc: Use devm_clk_get_optional()

[Martin Blumenstingl]

On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> Replace open coded variants of devm_clk_get_optional().
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v1 2/3] iio: adc: meson_saradc: Use devm_clk_get_optional()

[Martin Blumenstingl]

On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>
> Replace open coded variants of devm_clk_get_optional().
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[Martin Blumenstingl]

Hi Andy,

On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
[...]
> @@ -650,11 +648,12 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
>                                   void __iomem *base)
>  {
>         struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> +       struct device *idev = &indio_dev->dev;
> +       struct device *dev = dev->parent;
It looks like this should read:
    struct device *dev = idev->parent;

That said, I think this kind of typo is very easy with the current
naming schema.
It's been a while since I looked at other drivers but maybe the IIO
maintainers have some recommendations for us (which would apply to
multiple IIO drivers, not just meson_saradc).
For example: I am not sure if iio_{err,warn} functions (which take a
struct iio_dev pointer) have been proposed/discussed before. I think
they could be useful for other drivers as well.


Best regards,
Martin

Re: [PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[Martin Blumenstingl]

Hi Andy,

On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
[...]
> @@ -650,11 +648,12 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
>                                   void __iomem *base)
>  {
>         struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> +       struct device *idev = &indio_dev->dev;
> +       struct device *dev = dev->parent;
It looks like this should read:
    struct device *dev = idev->parent;

That said, I think this kind of typo is very easy with the current
naming schema.
It's been a while since I looked at other drivers but maybe the IIO
maintainers have some recommendations for us (which would apply to
multiple IIO drivers, not just meson_saradc).
For example: I am not sure if iio_{err,warn} functions (which take a
struct iio_dev pointer) have been proposed/discussed before. I think
they could be useful for other drivers as well.


Best regards,
Martin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[Martin Blumenstingl]

Hi Andy,

On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
[...]
> @@ -650,11 +648,12 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
>                                   void __iomem *base)
>  {
>         struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> +       struct device *idev = &indio_dev->dev;
> +       struct device *dev = dev->parent;
It looks like this should read:
    struct device *dev = idev->parent;

That said, I think this kind of typo is very easy with the current
naming schema.
It's been a while since I looked at other drivers but maybe the IIO
maintainers have some recommendations for us (which would apply to
multiple IIO drivers, not just meson_saradc).
For example: I am not sure if iio_{err,warn} functions (which take a
struct iio_dev pointer) have been proposed/discussed before. I think
they could be useful for other drivers as well.


Best regards,
Martin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 1/3] iio: adc: meson_saradc: Convert to use dev_err_probe()

[Martin Blumenstingl]

Hi Andy,

overall this is looking great - thank you for this patch!

On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
[...]
> +       if (IS_ERR(priv->tsc_regmap))
> +               return dev_err_probe(dev, PTR_ERR(priv->tsc_regmap), "failed to get amlogic,hhi-sysctrl regmap\n");
checkpatch complains:
  WARNING: line length of 115 exceeds 100 columns
  #44: FILE: drivers/iio/adc/meson_saradc.c:728:

Adding a line-break right before the error message will solve this problem


Best regards,
Martin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v1 1/3] iio: adc: meson_saradc: Convert to use dev_err_probe()

[Martin Blumenstingl]

Hi Andy,

overall this is looking great - thank you for this patch!

On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
[...]
> +       if (IS_ERR(priv->tsc_regmap))
> +               return dev_err_probe(dev, PTR_ERR(priv->tsc_regmap), "failed to get amlogic,hhi-sysctrl regmap\n");
checkpatch complains:
  WARNING: line length of 115 exceeds 100 columns
  #44: FILE: drivers/iio/adc/meson_saradc.c:728:

Adding a line-break right before the error message will solve this problem


Best regards,
Martin

Re: [PATCH v1 1/3] iio: adc: meson_saradc: Convert to use dev_err_probe()

[Martin Blumenstingl]

Hi Andy,

overall this is looking great - thank you for this patch!

On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
[...]
> +       if (IS_ERR(priv->tsc_regmap))
> +               return dev_err_probe(dev, PTR_ERR(priv->tsc_regmap), "failed to get amlogic,hhi-sysctrl regmap\n");
checkpatch complains:
  WARNING: line length of 115 exceeds 100 columns
  #44: FILE: drivers/iio/adc/meson_saradc.c:728:

Adding a line-break right before the error message will solve this problem


Best regards,
Martin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[kernel test robot]

Hi Andy,

I love your patch! Perhaps something to improve:

[auto build test WARNING on jic23-iio/togreg]
[also build test WARNING on v5.18 next-20220531]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Andy-Shevchenko/iio-adc-meson_saradc-Convert-to-use-dev_err_probe/20220601-052117
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20220601/202206010812.Xy2yMeXw-lkp@intel.com/config)
compiler: m68k-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/d2d128394df620a157f32fab808d46e5983f73e5
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Andy-Shevchenko/iio-adc-meson_saradc-Convert-to-use-dev_err_probe/20220601-052117
        git checkout d2d128394df620a157f32fab808d46e5983f73e5
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=m68k SHELL=/bin/bash drivers/iio/

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/iio/adc/meson_saradc.c: In function 'meson_sar_adc_clk_init':
>> drivers/iio/adc/meson_saradc.c:652:24: warning: 'dev' is used uninitialized [-Wuninitialized]
     652 |         struct device *dev = dev->parent;
         |                        ^~~


vim +/dev +652 drivers/iio/adc/meson_saradc.c

   646	
   647	static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
   648					  void __iomem *base)
   649	{
   650		struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
   651		struct device *idev = &indio_dev->dev;
 > 652		struct device *dev = dev->parent;
   653		struct clk_init_data init;
   654		const char *clk_parents[1];
   655	
   656		init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_div", dev_name(dev));
   657		if (!init.name)
   658			return -ENOMEM;
   659	
   660		init.flags = 0;
   661		init.ops = &clk_divider_ops;
   662		clk_parents[0] = __clk_get_name(priv->clkin);
   663		init.parent_names = clk_parents;
   664		init.num_parents = 1;
   665	
   666		priv->clk_div.reg = base + MESON_SAR_ADC_REG3;
   667		priv->clk_div.shift = MESON_SAR_ADC_REG3_ADC_CLK_DIV_SHIFT;
   668		priv->clk_div.width = MESON_SAR_ADC_REG3_ADC_CLK_DIV_WIDTH;
   669		priv->clk_div.hw.init = &init;
   670		priv->clk_div.flags = 0;
   671	
   672		priv->adc_div_clk = devm_clk_register(idev, &priv->clk_div.hw);
   673		if (WARN_ON(IS_ERR(priv->adc_div_clk)))
   674			return PTR_ERR(priv->adc_div_clk);
   675	
   676		init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_en", dev_name(dev));
   677		if (!init.name)
   678			return -ENOMEM;
   679	
   680		init.flags = CLK_SET_RATE_PARENT;
   681		init.ops = &clk_gate_ops;
   682		clk_parents[0] = __clk_get_name(priv->adc_div_clk);
   683		init.parent_names = clk_parents;
   684		init.num_parents = 1;
   685	
   686		priv->clk_gate.reg = base + MESON_SAR_ADC_REG3;
   687		priv->clk_gate.bit_idx = __ffs(MESON_SAR_ADC_REG3_CLK_EN);
   688		priv->clk_gate.hw.init = &init;
   689	
   690		priv->adc_clk = devm_clk_register(idev, &priv->clk_gate.hw);
   691		if (WARN_ON(IS_ERR(priv->adc_clk)))
   692			return PTR_ERR(priv->adc_clk);
   693	
   694		return 0;
   695	}
   696	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

Re: [PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[kernel test robot]

Hi Andy,

I love your patch! Perhaps something to improve:

[auto build test WARNING on jic23-iio/togreg]
[also build test WARNING on v5.18 next-20220531]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Andy-Shevchenko/iio-adc-meson_saradc-Convert-to-use-dev_err_probe/20220601-052117
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20220601/202206010812.Xy2yMeXw-lkp@intel.com/config)
compiler: m68k-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/d2d128394df620a157f32fab808d46e5983f73e5
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Andy-Shevchenko/iio-adc-meson_saradc-Convert-to-use-dev_err_probe/20220601-052117
        git checkout d2d128394df620a157f32fab808d46e5983f73e5
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=m68k SHELL=/bin/bash drivers/iio/

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/iio/adc/meson_saradc.c: In function 'meson_sar_adc_clk_init':
>> drivers/iio/adc/meson_saradc.c:652:24: warning: 'dev' is used uninitialized [-Wuninitialized]
     652 |         struct device *dev = dev->parent;
         |                        ^~~


vim +/dev +652 drivers/iio/adc/meson_saradc.c

   646	
   647	static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
   648					  void __iomem *base)
   649	{
   650		struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
   651		struct device *idev = &indio_dev->dev;
 > 652		struct device *dev = dev->parent;
   653		struct clk_init_data init;
   654		const char *clk_parents[1];
   655	
   656		init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_div", dev_name(dev));
   657		if (!init.name)
   658			return -ENOMEM;
   659	
   660		init.flags = 0;
   661		init.ops = &clk_divider_ops;
   662		clk_parents[0] = __clk_get_name(priv->clkin);
   663		init.parent_names = clk_parents;
   664		init.num_parents = 1;
   665	
   666		priv->clk_div.reg = base + MESON_SAR_ADC_REG3;
   667		priv->clk_div.shift = MESON_SAR_ADC_REG3_ADC_CLK_DIV_SHIFT;
   668		priv->clk_div.width = MESON_SAR_ADC_REG3_ADC_CLK_DIV_WIDTH;
   669		priv->clk_div.hw.init = &init;
   670		priv->clk_div.flags = 0;
   671	
   672		priv->adc_div_clk = devm_clk_register(idev, &priv->clk_div.hw);
   673		if (WARN_ON(IS_ERR(priv->adc_div_clk)))
   674			return PTR_ERR(priv->adc_div_clk);
   675	
   676		init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_en", dev_name(dev));
   677		if (!init.name)
   678			return -ENOMEM;
   679	
   680		init.flags = CLK_SET_RATE_PARENT;
   681		init.ops = &clk_gate_ops;
   682		clk_parents[0] = __clk_get_name(priv->adc_div_clk);
   683		init.parent_names = clk_parents;
   684		init.num_parents = 1;
   685	
   686		priv->clk_gate.reg = base + MESON_SAR_ADC_REG3;
   687		priv->clk_gate.bit_idx = __ffs(MESON_SAR_ADC_REG3_CLK_EN);
   688		priv->clk_gate.hw.init = &init;
   689	
   690		priv->adc_clk = devm_clk_register(idev, &priv->clk_gate.hw);
   691		if (WARN_ON(IS_ERR(priv->adc_clk)))
   692			return PTR_ERR(priv->adc_clk);
   693	
   694		return 0;
   695	}
   696	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[kernel test robot]

Hi Andy,

I love your patch! Perhaps something to improve:

[auto build test WARNING on jic23-iio/togreg]
[also build test WARNING on v5.18 next-20220531]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Andy-Shevchenko/iio-adc-meson_saradc-Convert-to-use-dev_err_probe/20220601-052117
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20220601/202206010812.Xy2yMeXw-lkp@intel.com/config)
compiler: m68k-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/d2d128394df620a157f32fab808d46e5983f73e5
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Andy-Shevchenko/iio-adc-meson_saradc-Convert-to-use-dev_err_probe/20220601-052117
        git checkout d2d128394df620a157f32fab808d46e5983f73e5
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=m68k SHELL=/bin/bash drivers/iio/

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/iio/adc/meson_saradc.c: In function 'meson_sar_adc_clk_init':
>> drivers/iio/adc/meson_saradc.c:652:24: warning: 'dev' is used uninitialized [-Wuninitialized]
     652 |         struct device *dev = dev->parent;
         |                        ^~~


vim +/dev +652 drivers/iio/adc/meson_saradc.c

   646	
   647	static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
   648					  void __iomem *base)
   649	{
   650		struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
   651		struct device *idev = &indio_dev->dev;
 > 652		struct device *dev = dev->parent;
   653		struct clk_init_data init;
   654		const char *clk_parents[1];
   655	
   656		init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_div", dev_name(dev));
   657		if (!init.name)
   658			return -ENOMEM;
   659	
   660		init.flags = 0;
   661		init.ops = &clk_divider_ops;
   662		clk_parents[0] = __clk_get_name(priv->clkin);
   663		init.parent_names = clk_parents;
   664		init.num_parents = 1;
   665	
   666		priv->clk_div.reg = base + MESON_SAR_ADC_REG3;
   667		priv->clk_div.shift = MESON_SAR_ADC_REG3_ADC_CLK_DIV_SHIFT;
   668		priv->clk_div.width = MESON_SAR_ADC_REG3_ADC_CLK_DIV_WIDTH;
   669		priv->clk_div.hw.init = &init;
   670		priv->clk_div.flags = 0;
   671	
   672		priv->adc_div_clk = devm_clk_register(idev, &priv->clk_div.hw);
   673		if (WARN_ON(IS_ERR(priv->adc_div_clk)))
   674			return PTR_ERR(priv->adc_div_clk);
   675	
   676		init.name = devm_kasprintf(idev, GFP_KERNEL, "%s#adc_en", dev_name(dev));
   677		if (!init.name)
   678			return -ENOMEM;
   679	
   680		init.flags = CLK_SET_RATE_PARENT;
   681		init.ops = &clk_gate_ops;
   682		clk_parents[0] = __clk_get_name(priv->adc_div_clk);
   683		init.parent_names = clk_parents;
   684		init.num_parents = 1;
   685	
   686		priv->clk_gate.reg = base + MESON_SAR_ADC_REG3;
   687		priv->clk_gate.bit_idx = __ffs(MESON_SAR_ADC_REG3_CLK_EN);
   688		priv->clk_gate.hw.init = &init;
   689	
   690		priv->adc_clk = devm_clk_register(idev, &priv->clk_gate.hw);
   691		if (WARN_ON(IS_ERR(priv->adc_clk)))
   692			return PTR_ERR(priv->adc_clk);
   693	
   694		return 0;
   695	}
   696	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[Andy Shevchenko]

On Tue, May 31, 2022 at 11:47:50PM +0200, Martin Blumenstingl wrote:
> On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> [...]
> > @@ -650,11 +648,12 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
> >                                   void __iomem *base)
> >  {
> >         struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> > +       struct device *idev = &indio_dev->dev;
> > +       struct device *dev = dev->parent;
> It looks like this should read:
>     struct device *dev = idev->parent;

Oops, indeed.

> That said, I think this kind of typo is very easy with the current
> naming schema.
> It's been a while since I looked at other drivers but maybe the IIO
> maintainers have some recommendations for us (which would apply to
> multiple IIO drivers, not just meson_saradc).
> For example: I am not sure if iio_{err,warn} functions (which take a
> struct iio_dev pointer) have been proposed/discussed before. I think
> they could be useful for other drivers as well.

Looking deeper into this example, I think the IIO dev usage might be wrong
in the first place, but since there are managed resources attached, I dunno
if it's the way to go. Let's wait for maintainers to chime in.


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[Andy Shevchenko]

On Tue, May 31, 2022 at 11:47:50PM +0200, Martin Blumenstingl wrote:
> On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> [...]
> > @@ -650,11 +648,12 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
> >                                   void __iomem *base)
> >  {
> >         struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> > +       struct device *idev = &indio_dev->dev;
> > +       struct device *dev = dev->parent;
> It looks like this should read:
>     struct device *dev = idev->parent;

Oops, indeed.

> That said, I think this kind of typo is very easy with the current
> naming schema.
> It's been a while since I looked at other drivers but maybe the IIO
> maintainers have some recommendations for us (which would apply to
> multiple IIO drivers, not just meson_saradc).
> For example: I am not sure if iio_{err,warn} functions (which take a
> struct iio_dev pointer) have been proposed/discussed before. I think
> they could be useful for other drivers as well.

Looking deeper into this example, I think the IIO dev usage might be wrong
in the first place, but since there are managed resources attached, I dunno
if it's the way to go. Let's wait for maintainers to chime in.


-- 
With Best Regards,
Andy Shevchenko



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v1 3/3] iio: adc: meson_saradc: Use temporary variable for struct device

[Andy Shevchenko]

On Tue, May 31, 2022 at 11:47:50PM +0200, Martin Blumenstingl wrote:
> On Tue, May 31, 2022 at 11:18 PM Andy Shevchenko
> <andriy.shevchenko@linux.intel.com> wrote:
> [...]
> > @@ -650,11 +648,12 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
> >                                   void __iomem *base)
> >  {
> >         struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
> > +       struct device *idev = &indio_dev->dev;
> > +       struct device *dev = dev->parent;
> It looks like this should read:
>     struct device *dev = idev->parent;

Oops, indeed.

> That said, I think this kind of typo is very easy with the current
> naming schema.
> It's been a while since I looked at other drivers but maybe the IIO
> maintainers have some recommendations for us (which would apply to
> multiple IIO drivers, not just meson_saradc).
> For example: I am not sure if iio_{err,warn} functions (which take a
> struct iio_dev pointer) have been proposed/discussed before. I think
> they could be useful for other drivers as well.

Looking deeper into this example, I think the IIO dev usage might be wrong
in the first place, but since there are managed resources attached, I dunno
if it's the way to go. Let's wait for maintainers to chime in.


-- 
With Best Regards,
Andy Shevchenko



_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic