Hi Neil,

On Tue, Mar 24, 2020 at 11:20 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
[...]
> @@ -195,23 +239,9 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
>                 if (!strstr(priv->drvdata->phy_names[i], "usb2"))
>                         continue;
>
> -               regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
> -                                  U2P_R0_POWER_ON_RESET,
> -                                  U2P_R0_POWER_ON_RESET);
> -
> -               if (priv->drvdata->otg_switch_supported && i == USB2_OTG_PHY) {
> -                       regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
> -                               U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,
> -                               U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS);
> -
> -                       dwc3_meson_g12a_usb2_set_mode(priv, i,
> -                                                     priv->otg_phy_mode);
> -               } else
> -                       dwc3_meson_g12a_usb2_set_mode(priv, i,
> -                                                     PHY_MODE_USB_HOST);
> -
> -               regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
> -                                  U2P_R0_POWER_ON_RESET, 0);
> +               ret = priv->drvdata->usb2_init_phy(priv, i, mode);
> +               if (ret)
> +                       return ret;
>         }
this doesn't compile for me, it complains that mode is undefined
I believe we need something like the attached patch on top.

[...]
> @@ -580,7 +612,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
>         /* Get dr_mode */
>         priv->otg_mode = usb_get_dr_mode(dev);
>
> -       dwc3_meson_g12a_usb_init(priv);
> +       ret = dwc3_meson_g12a_usb_init(priv);
> +       if (ret)
> +               goto err_disable_clks;
this looks like an unrelated fix, dwc3_meson_g12a_usb_init has always
returned int (as potential error)
also the same check is missing in dwc3_meson_g12a_resume
can you please move this to a separate patch with the appropriate tag:
Fixes: c99993376f72ca ("usb: dwc3: Add Amlogic G12A DWC3 glue")


Martin