From: "Milan Buška" <milan.buska-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: tegra-host1x - crash after boot
Date: Sun, 10 May 2020 12:03:38 +0200 [thread overview]
Message-ID: <CAFCWPPKL9FxuGXMd9J_sm+eFYnoqt3i8KdVhc4vQGNQe=e_JDw@mail.gmail.com> (raw)
Good day.
This is a bug in my system or in the kernel.
INIT: version 2.96 booting
The system is coming up. Please wait.
[ 8.699456] udevd[167]: starting version 3.2.9
[ 8.713802] udevd[168]: starting eudev-3.2.9
[ 8.720717] scsi 0:0:0:0: Direct-Access Kingston DataTraveler
3.0 PMAP PQ: 0 ANSI: 6
[ 8.731028] sd 0:0:0:0: [sda] 30277632 512-byte logical blocks:
(15.5 GB/14.4 GiB)
[ 8.742137] sd 0:0:0:0: [sda] Write Protect is off
[ 8.748454] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 8.831387] tegra-host1x 13e00000.host1x: Adding to iommu group 6
[ 8.842994] tegra-hda 3510000.hda: Adding to iommu group 7
[ 8.848819] tegra-xudc 3550000.usb: Adding to iommu group 8
[ 8.872093] mousedev: PS/2 mouse device common for all mice
[ 8.886474] input: jetson-tx2-hda HDMI/DP,pcm=3 as
/devices/platform/3510000.hda/sound/card0/input6
[ 8.896001] sda: sda1
[ 8.896944] input: jetson-tx2-hda HDMI/DP,pcm=7 as
/devices/platform/3510000.hda/sound/card0/input7
[ 8.910596] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 8.938033] at24 6-0050: 256 byte 24c02 EEPROM, read-only
[ 8.946665] at24 6-0057: 256 byte 24c02 EEPROM, read-only
[ 8.984839] dwc-eth-dwmac 2490000.ethernet: Adding to iommu group 9
[ 8.994168] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000140
[ 8.994838] dwc-eth-dwmac 2490000.ethernet: no reset control found
[ 9.002990] Mem abort info:
[ 9.003006] ESR = 0x96000004
[ 9.015056] EC = 0x25: DABT (current EL), IL = 32 bits
[ 9.020363] SET = 0, FnV = 0
[ 9.022792] dwc-eth-dwmac 2490000.ethernet: User ID: 0x10, Synopsys ID: 0x41
[ 9.023415] EA = 0, S1PTW = 0
[ 9.023417] Data abort info:
[ 9.023418] ISV = 0, ISS = 0x00000004
[ 9.023420] CM = 0, WnR = 0
[ 9.023423] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000269926000
[ 9.023424] [0000000000000140] pgd=0000000000000000, p4d=0000000000000000
[ 9.023429] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 9.023431] Modules linked in: tegra_drm(+) dwmac_dwc_qos_eth(+)
cec stmmac_platform drm_kms_helper stmmac at24 drm tegra_bpmp_thermal
mdio_xpcs snd_hda_codec_hdmi mousedev tegra_xudc snd_hda_tegra
snd_hda_c1
[ 9.023450] CPU: 5 PID: 170 Comm: udevd Tainted: G S
5.7.0-rc4-next-20200508 #1
[ 9.023451] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT)
[ 9.023454] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
[ 9.023461] pc : __iommu_probe_device+0x30/0x1b8
[ 9.023470] lr : iommu_probe_device+0x28/0x158
[ 9.030784] dwc-eth-dwmac 2490000.ethernet: DWMAC4/5
[ 9.033648] sp : ffff80001446b920
[ 9.033649] x29: ffff80001446b920 x28: ffff0001e8a28818
[ 9.033652] x27: ffff0001e8a28808 x26: ffff0001e9964080
[ 9.033654] x25: ffff0001e99648e0 x24: 0000000000000000
[ 9.033656] x23: ffff0001f4e37390 x22: 0000000000000000
[ 9.033658] x21: ffff800011a39000 x20: ffff0001e8a28818
[ 9.033661] x19: ffff0001e8a28818 x18: ffffffffffffffff
[ 9.033662] x17: 00000000000000c0 x16: fffffe00076b1a48
[ 9.033664] x15: ffff800011a39948 x14: ffff0001e996091c
[ 9.033666] x13: 0000000000000040 x12: 0000000000000018
[ 9.033668] x11: 0000000000000003 x10: 0101010101010101
[ 9.033670] x9 : fffffffffffffffb x8 : 7f7f7f7f7f7f7f7f
[ 9.033672] x7 : fefefeff646c606d x6 : 1e001e0ce4adeef5
[ 9.033674] x5 : 756e2d640c1e001e x4 : 8080808000000000
[ 9.033676] x3 : 830b9b4b216b73a8 x2 : ffff800008dcd030
[ 9.033678] x1 : ffff800008dcd030 x0 : ffff0001e2c5e580
[ 9.033680] Call trace:
[ 9.033684] __iommu_probe_device+0x30/0x1b8
[ 9.033686] iommu_probe_device+0x28/0x158
[ 9.033689] of_iommu_configure+0x200/0x218
[ 9.033694] of_dma_configure+0xd8/0x208
[ 9.033708] host1x_attach_driver+0x164/0x320 [host1x]
[ 9.033716] host1x_driver_register_full+0x84/0xe8 [host1x]
[ 9.033739] host1x_drm_init+0x34/0x1000 [tegra_drm]
[ 9.036786] dwc-eth-dwmac 2490000.ethernet: DMA HW capability
register supported
[ 9.040435] do_one_initcall+0x60/0x1c0
[ 9.040439] do_init_module+0x58/0x1d0
[ 9.040441] load_module+0x1eb8/0x2310
[ 9.040443] __do_sys_finit_module+0xdc/0xf8
[ 9.040445] __arm64_sys_finit_module+0x20/0x30
[ 9.040448] el0_svc_common.constprop.3+0x68/0x170
[ 9.040451] do_el0_svc+0x24/0x90
[ 9.040453] el0_sync_handler+0x13c/0x1a8
[ 9.040455] el0_sync+0x158/0x180
[ 9.040460] Code: f9417400 f9403261 f9404c36 b4000b00 (f940a2c0)
[ 9.040463] ---[ end trace a171a8cb8951077a ]---
Best regards
--
Remember, no question is too stupid and no problem too small
-- We've all been beginners
reply other threads:[~2020-05-10 10:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAFCWPPKL9FxuGXMd9J_sm+eFYnoqt3i8KdVhc4vQGNQe=e_JDw@mail.gmail.com' \
--to=milan.buska-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.