It worked. I had a problem with a recipe at a fetch step, but it was an internet issue. That's great!! Thank you very much. Best regards, Flavio 2012/11/14 Flavio Castro Alves Filho > > > > 2012/11/13 Denys Dmytriyenko > >> On Tue, Nov 13, 2012 at 11:10:31PM -0200, Flavio Castro Alves Filho wrote: >> > 2012/11/13 Tomas Frydrych >> > >> > | make[1]: /arm-poky-linux-gnueabi-gcc: Command not found >> >> ^^^^^^^^^ >> >> Yes, some of the recipes in meta-ti still use old TOOLCHAIN_* vars from >> Classic OE, which were set specifically to allow building packages either >> with an internal toolchain or with an external prebuilt one. In OE-Core or >> Yocto/Poky those vars are not set by default, as it's left for the >> distribution to deal with setting up any fancy toolchain business. You'd >> need to add something like this to your config file: >> >> TOOLCHAIN_PATH ?= "${STAGING_BINDIR_TOOLCHAIN}" >> TOOLCHAIN_SYSPATH ?= "${TOOLCHAIN_PATH}/${TARGET_SYS}" >> >> > Yes. I did that ant it worked. At least for this recipe. > > >> -- >> Denys >> > > > > -- > Flavio de Castro Alves Filho > > flavio.alves@gmail.com > www.linuxembarcado.com > Twitter: http://twitter.com/#!/fraviofii > LinkedIn profile: www.linkedin.com/in/flaviocastroalves > > -- Flavio de Castro Alves Filho flavio.alves@gmail.com www.linuxembarcado.com Twitter: http://twitter.com/#!/fraviofii LinkedIn profile: www.linkedin.com/in/flaviocastroalves