From: Chris Packham <judge.packham@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/12] ARM: kirkwood: migrate to DM_USB
Date: Sat, 9 Mar 2019 09:56:03 +1300 [thread overview]
Message-ID: <CAFOYHZAKkQiT-Mn6zxebFC1WGM62VG9OGXtY9BSVj1R43sr8+g@mail.gmail.com> (raw)
In-Reply-To: <6c3ab11ea775a2a35056851d1a346994@solinno.co.uk>
On Fri, 8 Mar 2019, 11:16 PM Leigh Brown, <leigh@solinno.co.uk> wrote:
> Hi Chris,
>
> On 2019-03-07 08:27, Chris Packham wrote:
> > This is my series to convert the kirkwood platforms to DM_USB.
> >
> > I've been testing on an old kirkwood eval board which patch 1 adds. I'd
> > really appreciate some testing on other kirkwood platforms.
> >
> > Chris Packham (12):
> > ARM: kirkwood: add db-88f6281-bp board
> > ARM: kirkwood: rename KW_CPU_WIN_BASE to MVEBU_CPU_WIN_BASE
> > ARM: kirkwood: remove KW_DEFADR_PCI_IO_REMAP
> > ARM: kirkwood: switch to using mvebu mbus
> > ARM: kirkwood: remove kw_config_adr_windows
> > ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp
> > ARM: kirkwood: enable CONFIG_DM_USB for {dream,guru,sheeva}plug
> > ARM: kirkwood: enable CONFIG_DM_USB for dns325
> > ARM: kirkwood: enable CONFIG_DM_USB for ds109
> > ARM: kirkwood: enable CONFIG_DM_USB for goflexhome
> > ARM: kirkwood: enable CONFIG_DM_USB for lschlv2 and lsxhl
> > ARM: kirkwood: enable CONFIG_DM_USB for nas220
> >
> > arch/arm/dts/kirkwood-db-88f6281-spi.dts | 48 +++++++++
> > arch/arm/dts/kirkwood-db-88f6281.dts | 26 +++++
> > arch/arm/dts/kirkwood-db.dtsi | 94 +++++++++++++++++
> > arch/arm/mach-kirkwood/Kconfig | 4 +
> > arch/arm/mach-kirkwood/cpu.c | 73 ++++---------
> > arch/arm/mach-kirkwood/include/mach/cpu.h | 13 ++-
> > arch/arm/mach-kirkwood/include/mach/soc.h | 2 +-
> > arch/arm/mach-mvebu/Makefile | 1 +
> > arch/arm/mach-mvebu/mbus.c | 6 ++
> > board/Marvell/db-88f6281-bp/Kconfig | 12 +++
> > board/Marvell/db-88f6281-bp/MAINTAINERS | 10 ++
> > board/Marvell/db-88f6281-bp/Makefile | 3 +
> > board/Marvell/db-88f6281-bp/db-88f6281-bp.c | 103 ++++++++++++++++++
> > board/Marvell/db-88f6281-bp/kwbimage.cfg | 36 +++++++
> > configs/db-88f6281-bp-nand_defconfig | 54 ++++++++++
> > configs/db-88f6281-bp-spi_defconfig | 55 ++++++++++
> > configs/dns325_defconfig | 2 +
> > configs/dreamplug_defconfig | 2 +
> > configs/ds109_defconfig | 2 +
> > configs/goflexhome_defconfig | 2 +
> > configs/guruplug_defconfig | 2 +
> > configs/lschlv2_defconfig | 2 +
> > configs/lsxhl_defconfig | 2 +
> > configs/nas220_defconfig | 2 +
> > configs/sheevaplug_defconfig | 1 +
> > include/configs/db-88f6281-bp.h | 109 ++++++++++++++++++++
> > 26 files changed, 608 insertions(+), 58 deletions(-)
> > create mode 100644 arch/arm/dts/kirkwood-db-88f6281-spi.dts
> > create mode 100644 arch/arm/dts/kirkwood-db-88f6281.dts
> > create mode 100644 arch/arm/dts/kirkwood-db.dtsi
> > create mode 100644 board/Marvell/db-88f6281-bp/Kconfig
> > create mode 100644 board/Marvell/db-88f6281-bp/MAINTAINERS
> > create mode 100644 board/Marvell/db-88f6281-bp/Makefile
> > create mode 100644 board/Marvell/db-88f6281-bp/db-88f6281-bp.c
> > create mode 100644 board/Marvell/db-88f6281-bp/kwbimage.cfg
> > create mode 100644 configs/db-88f6281-bp-nand_defconfig
> > create mode 100644 configs/db-88f6281-bp-spi_defconfig
> > create mode 100644 include/configs/db-88f6281-bp.h
>
> I have tested your patches on my Dreamplug on top of the SPI patch and
> my patch to fix the cache setup. It looks to be working fine. It boots
> from the SD card which is connected via USB. Are there any additional
> tests you recommend?
>
> Tested-by: Leigh Brown <leigh@solinno.co.uk>
>
Awesome thanks. If you happen to have a usb Ethernet adapter it'd be good
to try that out but the flash drive is probably enough for the "has this
broken anything" test.
> MKIMAGE u-boot.kwb
> ===================== WARNING ======================
> This board does not use CONFIG_DM_SCSI. Please update
> the storage controller to use CONFIG_DM_SCSI before the v2019.07
> release.
> Failure to update by the deadline may result in board removal.
> See doc/driver-model/MIGRATION.txt for more info.
> ====================================================
> CFGCHK u-boot.cfg
> leigh at dish:/devel/git-trees/dreamplug/u-boot$ tools/kwboot -b u-boot.kwb
> -p -B 115200 -t /dev/ttyUSB0
> Sending boot message. Please reboot the target...\
> Sending boot image...
> 0 %
> [......................................................................]
> 2 %
> [......................................................................]
> 4 %
> [......................................................................]
> 7 %
> [......................................................................]
> 9 %
> [......................................................................]
> 12 %
> [......................................................................]
> 14 %
> [......................................................................]
> 16 %
> [......................................................................]
> 19 %
> [......................................................................]
> 21 %
> [......................................................................]
> 24 %
> [......................................................................]
> 26 %
> [......................................................................]
> 28 %
> [......................................................................]
> 31 %
> [......................................................................]
> 33 %
> [......................................................................]
> 36 %
> [......................................................................]
> 38 %
> [......................................................................]
> 40 %
> [......................................................................]
> 43 %
> [......................................................................]
> 45 %
> [......................................................................]
> 48 %
> [......................................................................]
> 50 %
> [......................................................................]
> 52 %
> [......................................................................]
> 55 %
> [......................................................................]
> 57 %
> [......................................................................]
> 59 %
> [......................................................................]
> 62 %
> [......................................................................]
> 64 %
> [......................................................................]
> 67 %
> [......................................................................]
> 69 %
> [......................................................................]
> 71 %
> [......................................................................]
> 74 %
> [......................................................................]
> 76 %
> [......................................................................]
> 79 %
> [......................................................................]
> 81 %
> [......................................................................]
> 83 %
> [......................................................................]
> 86 %
> [......................................................................]
> 88 %
> [......................................................................]
> 91 %
> [......................................................................]
> 93 %
> [......................................................................]
> 95 %
> [......................................................................]
> 98 % [.................................................]
> [Type Ctrl-\ + c to quit]
>
>
> U-Boot 2019.04-rc3-00016-gf18b7b2798-dirty (Mar 08 2019 - 08:05:45
> +0000)
> Marvell-DreamPlug
>
> SoC: Kirkwood 88F6281_A1
> DRAM: 512 MiB
> Loading Environment from SPI Flash... SF: Detected mx25l1606e with page
> size 256 Bytes, erase size 4 KiB, total 2 MiB
> OK
> In: serial
> Out: serial
> Err: serial
> Net: egiga0, egiga1
> 88E1116 Initialized on egiga0
> 88E1116 Initialized on egiga1
> Hit any key to stop autoboot: 0
> => printenv
> baudrate=115200
> bootargs=console=ttyS0,115200 root=LABEL=dproot rootdelay=2 ro quiet
> bootcmd=usb start;run x_load_uimage x_load_dtb x_load_uinitrd
> x_bootm;reset
> bootdelay=1
> dtb=kirkwood-dreamplug.dtb
> eth1addr=F0:AD:4E:00:7B:A8
> ethact=egiga0
> ethaddr=F0:AD:4E:00:7B:A7
> fdtcontroladdr=1fb907c8
> filesize=4DBFD3
> loaddev=usb 0
> stderr=serial
> stdin=serial
> stdout=serial
> uimage=uImage-4.19.0-2-marvell
> uinitrd=uInitrd-4.19.0-2-marvell
> x_bootm=bootm 0x6000000 0x6600000 0x6400000
> x_load_dtb=fatload ${loaddev} 0x6400000 ${dtb}
> x_load_uimage=fatload ${loaddev} 0x6000000 ${uimage}
> x_load_uinitrd=fatload ${loaddev} 0x6600000 ${uinitrd}
>
> Environment size: 626/4092 bytes
> => usb start
> starting USB...
> USB0: USB EHCI 1.00
> scanning bus 0 for devices... Device NOT ready
> Request Sense returned 02 3A 00
> 4 USB Device(s) found
> scanning usb for storage devices... 1 Storage Device(s) found
> => fatls usb 0
> dodgy/
> 351132 u-boot.kwb
> 9949 kirkwood-dreamplug.dtb
> 2038528 uImage-4.19.0-2-marvell
> 4015832 uInitrd-4.19.0-2-marvell
> 1879928 uImage-4.19.7+
> 2746404 uInitrd-4.19.7+
>
> 6 file(s), 1 dir(s)
>
> => boot
> 2038528 bytes read in 106 ms (18.3 MiB/s)
> 9949 bytes read in 19 ms (510.7 KiB/s)
> 4015832 bytes read in 197 ms (19.4 MiB/s)
> ## Booting kernel from Legacy Image at 06000000 ...
> Image Name: uImage-4.19.0-2-marvell
> Created: 2019-02-26 14:27:36 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 2038464 Bytes = 1.9 MiB
> Load Address: 00008000
> Entry Point: 00008000
> Verifying Checksum ... OK
> ## Loading init Ramdisk from Legacy Image at 06600000 ...
> Image Name: uInitrd-4.19.0-2-marvell
> Created: 2019-02-26 14:28:44 UTC
> Image Type: ARM Linux RAMDisk Image (uncompressed)
> Data Size: 4015768 Bytes = 3.8 MiB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> ## Flattened Device Tree blob at 06400000
> Booting using the fdt blob at 0x6400000
> Loading Kernel Image ... OK
> Loading Ramdisk to 0fc2b000, end 0ffff698 ... OK
> Loading Device Tree to 0fc25000, end 0fc2a6dc ... OK
>
> Starting kernel ...
>
> Regards,
>
> Leigh.
>
prev parent reply other threads:[~2019-03-08 20:56 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-07 8:27 [U-Boot] [PATCH v2 00/12] ARM: kirkwood: migrate to DM_USB Chris Packham
2019-03-07 8:27 ` [U-Boot] [PATCH v2 01/12] ARM: kirkwood: add db-88f6281-bp board Chris Packham
2019-03-07 9:33 ` Stefan Roese
2019-03-08 6:44 ` Chris Packham
2019-03-13 7:00 ` Chris Packham
2019-03-13 7:23 ` Stefan Roese
2019-03-07 8:27 ` [U-Boot] [PATCH v2 02/12] ARM: kirkwood: rename KW_CPU_WIN_BASE to MVEBU_CPU_WIN_BASE Chris Packham
2019-03-07 11:30 ` Stefan Roese
2019-03-07 8:27 ` [U-Boot] [PATCH v2 03/12] ARM: kirkwood: remove KW_DEFADR_PCI_IO_REMAP Chris Packham
2019-03-07 11:30 ` Stefan Roese
2019-03-07 8:27 ` [U-Boot] [PATCH v2 04/12] ARM: kirkwood: switch to using mvebu mbus Chris Packham
2019-03-07 11:34 ` Stefan Roese
2019-03-07 8:27 ` [U-Boot] [PATCH v2 05/12] ARM: kirkwood: remove kw_config_adr_windows Chris Packham
2019-03-07 11:34 ` Stefan Roese
2019-03-07 8:27 ` [U-Boot] [PATCH v2 06/12] ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp Chris Packham
2019-03-07 11:35 ` Stefan Roese
2019-03-07 8:28 ` [U-Boot] [PATCH v2 07/12] ARM: kirkwood: enable CONFIG_DM_USB for {dream, guru, sheeva}plug Chris Packham
2019-03-07 11:35 ` Stefan Roese
2019-03-07 8:28 ` [U-Boot] [PATCH v2 08/12] ARM: kirkwood: enable CONFIG_DM_USB for dns325 Chris Packham
2019-03-07 11:35 ` Stefan Roese
2019-03-07 8:28 ` [U-Boot] [PATCH v2 09/12] ARM: kirkwood: enable CONFIG_DM_USB for ds109 Chris Packham
2019-03-07 11:36 ` Stefan Roese
2019-03-07 8:28 ` [U-Boot] [PATCH v2 10/12] ARM: kirkwood: enable CONFIG_DM_USB for goflexhome Chris Packham
2019-03-07 11:36 ` Stefan Roese
2019-03-07 8:28 ` [U-Boot] [PATCH v2 11/12] ARM: kirkwood: enable CONFIG_DM_USB for lschlv2 and lsxhl Chris Packham
2019-03-07 11:36 ` Stefan Roese
2019-03-07 8:28 ` [U-Boot] [PATCH v2 12/12] ARM: kirkwood: enable CONFIG_DM_USB for nas220 Chris Packham
2019-03-07 11:36 ` Stefan Roese
2019-03-08 10:16 ` [U-Boot] [PATCH v2 00/12] ARM: kirkwood: migrate to DM_USB Leigh Brown
2019-03-08 20:56 ` Chris Packham [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAFOYHZAKkQiT-Mn6zxebFC1WGM62VG9OGXtY9BSVj1R43sr8+g@mail.gmail.com \
--to=judge.packham@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.