From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ley Foon Tan <lftan.linux@gmail.com>
Date: Mon, 17 Apr 2017 11:05:53 +0800
Subject: [U-Boot] [PATCH v5 14/16] arm: socfpga: Add config and
	defconfig for Arria 10
In-Reply-To: <8b6dd3ff-1742-b022-75f8-5efb15b6c210@denx.de>
References: <1492105285-2804-1-git-send-email-ley.foon.tan@intel.com>
 <1492105285-2804-15-git-send-email-ley.foon.tan@intel.com>
 <8b6dd3ff-1742-b022-75f8-5efb15b6c210@denx.de>
Message-ID: <CAFiDJ5_Fs+P1nPQ7iUeWy=EGaOaY+AH7Zrx5f2BtxWCxt6vyCA@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Fri, Apr 14, 2017 at 6:25 PM, Marek Vasut <marex@denx.de> wrote:
> On 04/13/2017 07:41 PM, Ley Foon Tan wrote:
>> Add config and defconfig for the Arria10 and update socfpga_common.h.
>>
>> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
>> Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
>
> [...]
>
>> @@ -298,7 +306,10 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>>   */
>>  #define CONFIG_SPL_FRAMEWORK
>>  #define CONFIG_SPL_TEXT_BASE         CONFIG_SYS_INIT_RAM_ADDR
>> -#define CONFIG_SPL_MAX_SIZE          (64 * 1024)
>> +#define CONFIG_SPL_MAX_SIZE          CONFIG_SYS_INIT_RAM_SIZE
>> +#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
>> +#define CONFIG_SPL_BOARD_INIT
>
> This should be in Kconfig and selected by arch/arm/mach-socfpga/Kconfig
> entry for A10
We can't use Kconfig method for CONFIG_SPL_BOARD_INIT, it is not a
Kconfig parameter now.

Regards
Ley Foon