From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vivek Gautam Subject: Re: [PATCH 3/4] phy: qcom-ufs: Remove -always-on property Date: Fri, 20 Jan 2017 01:09:06 +0530 Message-ID: References: <20170119104739.4376-1-bjorn.andersson@linaro.org> <20170119104739.4376-3-bjorn.andersson@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: <20170119104739.4376-3-bjorn.andersson@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Bjorn Andersson Cc: Kishon Vijay Abraham I , "linux-kernel@vger.kernel.org" , linux-arm-msm@vger.kernel.org, Rob Herring , Mark Rutland , "devicetree@vger.kernel.org" , Subhash Jadavani List-Id: linux-arm-msm@vger.kernel.org On Thu, Jan 19, 2017 at 4:17 PM, Bjorn Andersson wrote: > The fact that a regulator is always-on is a property of the regulator, > not a specific consumer. Implementing this in the driver leads to a > system behaviour that is dependent on if the Qualcomm UFS PHY was ever > (partially) probed. > > If the specific regulator should be always on in a particular device, > mark it so by specifying "regulator-always-on" in the regulator node. > > Cc: Subhash Jadavani > Cc: Vivek Gautam > Signed-off-by: Bjorn Andersson > --- Looks good. Reviewed-by: Vivek Gautam Regards Vivek > Documentation/devicetree/bindings/ufs/ufs-qcom.txt | 1 - > drivers/phy/phy-qcom-ufs-i.h | 1 - > drivers/phy/phy-qcom-ufs.c | 5 +---- > 3 files changed, 1 insertion(+), 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt > index b6b5130e5f65..1f69ee1a61ea 100644 > --- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt > +++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt > @@ -29,7 +29,6 @@ Optional properties: > - vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply > - vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply > - vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply > -- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on > > Example: > > diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/phy-qcom-ufs-i.h > index d505d98cf5f8..13b02b7de30b 100644 > --- a/drivers/phy/phy-qcom-ufs-i.h > +++ b/drivers/phy/phy-qcom-ufs-i.h > @@ -77,7 +77,6 @@ struct ufs_qcom_phy_vreg { > int min_uV; > int max_uV; > bool enabled; > - bool is_always_on; > }; > > struct ufs_qcom_phy { > diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c > index bbd317158084..c145fa6e824c 100644 > --- a/drivers/phy/phy-qcom-ufs.c > +++ b/drivers/phy/phy-qcom-ufs.c > @@ -242,9 +242,6 @@ static int ufs_qcom_phy_init_vreg(struct device *dev, > } > err = 0; > } > - snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name); > - vreg->is_always_on = of_property_read_bool(dev->of_node, > - prop_name); > } > > if (!strcmp(name, "vdda-pll")) { > @@ -402,7 +399,7 @@ static int ufs_qcom_phy_disable_vreg(struct device *dev, > { > int ret = 0; > > - if (!vreg || !vreg->enabled || vreg->is_always_on) > + if (!vreg || !vreg->enabled) > goto out; > > ret = regulator_disable(vreg->reg); > -- > 2.11.0 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project