From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Busby Subject: Re: Raid5 to another raid level?? Date: Fri, 2 Sep 2011 01:54:49 +0100 Message-ID: References: <-7094796685559591664@unknownmsgid> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Return-path: In-Reply-To: <-7094796685559591664@unknownmsgid> Sender: linux-raid-owner@vger.kernel.org To: john.robinson@anonymous.org.uk Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids As could not sleep, have just tested and works fine...here is what i have done sdd and sde are the 2 new disks mdadm -C /dev/md1 -l4 -n3 -e 1.0 /dev/sdd /dev/sde missing not sure if worth now using 1.2 as this seems the default setting if not specified?? sdb and sdc are the old raid 5 disks echo frozen > /sys/block/md0/md/sync_action mdadm /dev/md0 --add /dev/sdb mdadm --grow --force /dev/md0 --raid-disks=4 echo frozen > /sys/block/md0/md/sync_action mdadm /dev/md0 --add /dev/sdc mdadm --grow --force /dev/md0 --raid-disks=5 echo raid0 > /sys/block/md0/md/level then resize the fs...job done :) On 2 September 2011 00:50, Michael Busby wrote: > Will test tomorrow once back in the office, hope the 4tb sync will be > finished by then > > I will report back my findings > > > > -- Sent from my HP TouchPadOn 1 Sep 2011 11:34 PM, > wrote: > On 01/09/2011 22:50, Michael Busby wrote: >> I have found the following and see that you can convert from raid4 to >> raid0 fairly easy >> >> >> http://ubuntuforums.org/showpost.php?p=10412231&postcount=20 >> >> i have a 2 disk raid5 and want to be able to convert this to raid0, i >> was thinking of adding a extra 2 disk and setting them up as raid0, >> moving the data over then adding the original raid5 disks to the raid0 >> setup, but i see that you are unable to add disk to a raid0 setup, >> would it be possible to setup a raid4 with 2 disks and 1 missing, move >> the data from the raid5 to raid4 then add both of the original disks >> to the raid4 the downgrade this to raid0??? > > Off the top of my head, feeling slightly sozzled (been for a few beers), > this might work, but as your linked post referring to a list reply from > Neil Brown says, you should test first. You could use some USB sticks, > or alternatively loopback devices are ideal for this kind of test. > > Cheers, > > John. >