All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Zoran" <zoran.stojsavljevic@gmail.com>
To: Ross Burton <ross@burtonini.com>,
	Yocto-mailing-list <yocto@lists.yoctoproject.org>,
	 Zoltan Kerenyi Nagy <kerenyi.nagy.zoltan@gmail.com>
Subject: [yocto] insmod - huawei E3372h kernel module
Date: Tue, 19 Jan 2021 14:27:36 +0100	[thread overview]
Message-ID: <CAGAf8Ly7fty2KHjZWz-p0N_7OjcaWVXhhQuc1Dcrog96KYC36Q@mail.gmail.com> (raw)
In-Reply-To: <165BA4E49F808CA9.28472@lists.yoctoproject.org>

Forwarded to ross@burtonini.com .

Thank you,
Zoran/Zee

---------- Forwarded message ---------
From: Zoran via lists.yoctoproject.org
<zoran.stojsavljevic=gmail.com@lists.yoctoproject.org>
Date: Tue, Jan 19, 2021 at 2:23 PM
Subject: Re: [yocto] insmod - huawei E3372h kernel module
To: Zoltan Kerenyi Nagy <kerenyi.nagy.zoltan@gmail.com>, Burton, Ross
<ross.burton@intel.com>
Cc: Yocto-mailing-list <yocto@lists.yoctoproject.org>

> As far as I understand the KERNEL_MODULE_AUTOLOAD directive will
> populate the /etc/modules file, however, after bitbaking, on the device there
> is no /etc/modules file or folder but another folder:
>
> root@barix-ipam400:~# ls /lib/modules/4.10.0/extra/
> cdc-ncm.ko         cdc-wdm.ko         hello.ko           huawei_cdc_ncm.ko

Hello Ross,

Any comment from you on the target module configuration?

My understanding is the same, the YOCTO building system should somehow
create targets' /etc/modules file, since every reboot should repeat
the order of modules loading (read from the same).

Thank you,
Zoran
_______

On Tue, Jan 19, 2021 at 2:00 PM Zoltan Kerenyi Nagy
<kerenyi.nagy.zoltan@gmail.com> wrote:
>
> I don have a recipie for /etc/modules
>
> To my understanding this order will cause the load:
>
> KERNEL_MODULE_AUTOLOAD += "ncm_driver"KERNEL_MODULE_PROBECONF += "ncm_driver"cdc_ncm = "options ncm_driver iProduct=USB_Host_Driver_for_Network_Control_Model iManufacturer=NCM"
>
> KERNEL_MODULE_AUTOLOAD += "wmc_device_managment"KERNEL_MODULE_PROBECONF += "wmc_device"cdc_wdm = "options wmc_device iProduct=USB_CDC_WCM_Device_Management iManufacturer=WMC"
>
> KERNEL_MODULE_AUTOLOAD += "lte"KERNEL_MODULE_PROBECONF += "lte"huawei_cdc_ncm = "options lte iProduct=E3372h iManufacturer=Huawei"
>
> As far as I understand the KERNEL_MODULE_AUTOLOAD directive will populate the /etc/modules file, however, after bitbaking, on the device there is no /etc/modules file or folder but another folder:
>
> root@barix-ipam400:~# ls /lib/modules/4.10.0/extra/
> cdc-ncm.ko         cdc-wdm.ko         hello.ko           huawei_cdc_ncm.ko
>
>
>
> --
> Zolee
>
>



  parent reply	other threads:[~2021-01-19 13:27 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-07 13:46 insmod - huawei E3372h kernel module Zoltan Kerenyi Nagy
2021-01-07 15:03 ` [yocto] " Zoran
2021-01-07 15:16   ` Zoltan Kerenyi Nagy
2021-01-07 15:27     ` Zoran
     [not found]     ` <1657FCB4180F6472.31350@lists.yoctoproject.org>
2021-01-07 17:20       ` Zoran
     [not found]         ` <CAHwRhWZSW+g0qJkAQLz5npmi5ig37XTvM6r_tJWmpk3ERMB9ew@mail.gmail.com>
2021-01-07 18:35           ` Zoran
2021-01-08 10:36         ` Zoltan Kerenyi Nagy
2021-01-08 11:22           ` Zoltan Kerenyi Nagy
2021-01-08 11:59             ` [yocto] " Zoran
2021-01-08 12:28               ` Zoltan Kerenyi Nagy
2021-01-08 12:49                 ` [yocto] " Zoran
     [not found]                 ` <165842AB3B8C5237.7830@lists.yoctoproject.org>
2021-01-08 14:43                   ` Zoran
2021-01-11 10:23                     ` Zoltan Kerenyi Nagy
2021-01-11 13:20                     ` Zoltan Kerenyi Nagy
2021-01-12 15:13                     ` Zoltan Kerenyi Nagy
2021-01-12 15:17                       ` Zoltan Kerenyi Nagy
2021-01-17 12:34                     ` Zoltan Kerenyi Nagy
2021-01-17 22:27                       ` [yocto] " Zoran
2021-01-18  5:27                         ` Zoltan Kerenyi Nagy
2021-01-19 13:00                         ` Zoltan Kerenyi Nagy
2021-01-19 13:23                           ` [yocto] " Zoran
     [not found]                           ` <165BA4E49F808CA9.28472@lists.yoctoproject.org>
2021-01-19 13:27                             ` Zoran [this message]
2021-01-19 13:41                         ` Zoltan Kerenyi Nagy
2021-01-19 14:48                           ` Zoltan Kerenyi Nagy
2021-01-19 16:54                             ` [yocto] " Zoran
2021-01-20 11:20                               ` Zoltan Kerenyi Nagy
2021-01-20 13:04                                 ` [yocto] " Zoran
2021-01-21 10:00                                   ` Zoltan Kerenyi Nagy
2021-01-25 13:39                                     ` Zoltan Kerenyi Nagy
2021-01-08 12:35               ` Zoltan Kerenyi Nagy
2021-01-08 10:24     ` Zoltan Kerenyi Nagy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAGAf8Ly7fty2KHjZWz-p0N_7OjcaWVXhhQuc1Dcrog96KYC36Q@mail.gmail.com \
    --to=zoran.stojsavljevic@gmail.com \
    --cc=kerenyi.nagy.zoltan@gmail.com \
    --cc=ross@burtonini.com \
    --cc=yocto@lists.yoctoproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.