From mboxrd@z Thu Jan 1 00:00:00 1970 From: scd rjcom Date: Mon, 25 Jan 2021 12:33:02 -0800 Subject: [Buildroot] Porting a vendor specific yocto layer to the buildroot In-Reply-To: <877do07r4c.fsf@dell.be.48ers.dk> References: <1611562430908-0.post@n4.nabble.com> <877do07r4c.fsf@dell.be.48ers.dk> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Thank you! I understand that the vendor specific layers have their own packages and customizations. I was looking for some generic guidelines to perform this. (Assuming that all the packages are open source) It would be great if buildroot documentation will provide some guidelines to perform the porting of the Yocto layers to Buildroot. Thanks! On Mon, Jan 25, 2021 at 11:28 AM Peter Korsgaard wrote: > >>>>> "scdrj" == scdrj writes: > > > How do I port a vendor specific yocto layer to the buildroot? > > One step at a time? > > No seriously, it is hard to know without knowing what that layer > does. You will need to have a look at everything it does and add > packages and rootfs overlays / post-build scripts to do the same thing > in Buildroot. > > -- > Bye, Peter Korsgaard > -------------- next part -------------- An HTML attachment was scrubbed... URL: