All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniele Palmas <dnlplm@gmail.com>
To: Manivannan Sadhasivam <mani@kernel.org>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>,
	mhi@lists.linux.dev,  linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH 1/1] bus: mhi: host: allow SBL as initial EE
Date: Tue, 30 May 2023 13:12:59 +0200	[thread overview]
Message-ID: <CAGRyCJGR4YsUgWekf_DgYHJqoXNfmFpL-N_virvqE18aU=Ovkg@mail.gmail.com> (raw)
In-Reply-To: <20230530103103.GB6379@thinkpad>

Hi Mani,

Il giorno mar 30 mag 2023 alle ore 12:31 Manivannan Sadhasivam
<mani@kernel.org> ha scritto:
>
> On Tue, May 30, 2023 at 11:13:40AM +0200, Daniele Palmas wrote:
> > There are situations in which SBL is a legitimate initial execution
> > environment (e.g. modem stuck in SBL due to a firmware failure...), but
> > mhi refuses to start:
> >
> > mhi-pci-generic 0000:01:00.0: MHI PCI device found: foxconn-sdx55
> > mhi-pci-generic 0000:01:00.0: BAR 0: assigned
> > mhi-pci-generic 0000:01:00.0: enabling device (0000 -> 0002)
> > mhi mhi0: Requested to power ON
> > mhi mhi0: SECONDARY BOOTLOADER is not a valid EE for power on
> > mhi-pci-generic 0000:01:00.0: failed to power up MHI controller
> > mhi-pci-generic: probe of 0000:01:00.0 failed with error -5
> >
> > Fix this by adding SBL as an allowed initial execution environment.
> >
>
> What can you do with the modem when firmware failure happens? If there is a
> usecase, please explain.

(removing Siddartha and Sujeev due to addresses not working)

A possible scenario for a Telit modem not being able to go to mission
mode is when a firmware update does not work properly: in this case it
remains stuck in SBL, but the SAHARA device can be used for retrying
the firmware update.

Telit FN990 supports the SAHARA channels in pci_generic. It's true
that there's still missing the exposed device for userspace, something
that we are currently managing with out of tree patches, but I see
that there's some ongoing effort for that
https://lore.kernel.org/mhi/20230522190459.13790-1-quic_jhugo@quicinc.com/

I'm not sure if non-Telit modems have other reasonable use-cases.

Regards,
Daniele

>
> - Mani
>
> > Fixes: 3000f85b8f47 ("bus: mhi: core: Add support for basic PM operations")
> > Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
> > ---
> >  drivers/bus/mhi/host/internal.h | 2 +-
> >  drivers/bus/mhi/host/pm.c       | 3 ++-
> >  2 files changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/bus/mhi/host/internal.h b/drivers/bus/mhi/host/internal.h
> > index 2e139e76de4c..3bdcd2321aa5 100644
> > --- a/drivers/bus/mhi/host/internal.h
> > +++ b/drivers/bus/mhi/host/internal.h
> > @@ -56,7 +56,7 @@ extern const char * const mhi_ee_str[MHI_EE_MAX];
> >
> >  #define MHI_IN_PBL(ee) (ee == MHI_EE_PBL || ee == MHI_EE_PTHRU || \
> >                       ee == MHI_EE_EDL)
> > -#define MHI_POWER_UP_CAPABLE(ee) (MHI_IN_PBL(ee) || ee == MHI_EE_AMSS)
> > +#define MHI_POWER_UP_CAPABLE(ee) (MHI_IN_PBL(ee) || ee == MHI_EE_AMSS || ee == MHI_EE_SBL)
> >  #define MHI_FW_LOAD_CAPABLE(ee) (ee == MHI_EE_PBL || ee == MHI_EE_EDL)
> >  #define MHI_IN_MISSION_MODE(ee) (ee == MHI_EE_AMSS || ee == MHI_EE_WFW || \
> >                                ee == MHI_EE_FP)
> > diff --git a/drivers/bus/mhi/host/pm.c b/drivers/bus/mhi/host/pm.c
> > index 083459028a4b..18872c5017be 100644
> > --- a/drivers/bus/mhi/host/pm.c
> > +++ b/drivers/bus/mhi/host/pm.c
> > @@ -1203,10 +1203,11 @@ int mhi_sync_power_up(struct mhi_controller *mhi_cntrl)
> >
> >       wait_event_timeout(mhi_cntrl->state_event,
> >                          MHI_IN_MISSION_MODE(mhi_cntrl->ee) ||
> > +                        mhi_cntrl->ee == MHI_EE_SBL ||
> >                          MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
> >                          msecs_to_jiffies(mhi_cntrl->timeout_ms));
> >
> > -     ret = (MHI_IN_MISSION_MODE(mhi_cntrl->ee)) ? 0 : -ETIMEDOUT;
> > +     ret = (MHI_IN_MISSION_MODE(mhi_cntrl->ee) || mhi_cntrl->ee == MHI_EE_SBL) ? 0 : -ETIMEDOUT;
> >       if (ret)
> >               mhi_power_down(mhi_cntrl, false);
> >
> > --
> > 2.37.1
> >
>
> --
> மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2023-05-30 11:23 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-30  9:13 [PATCH 1/1] bus: mhi: host: allow SBL as initial EE Daniele Palmas
2023-05-30 10:31 ` Manivannan Sadhasivam
2023-05-30 11:12   ` Daniele Palmas [this message]
2023-05-30 13:56     ` Manivannan Sadhasivam
2023-05-31 11:44       ` Daniele Palmas
2023-05-31 13:01         ` Manivannan Sadhasivam
2023-05-31 13:56           ` Jeffrey Hugo
2023-06-01  9:51           ` Daniele Palmas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAGRyCJGR4YsUgWekf_DgYHJqoXNfmFpL-N_virvqE18aU=Ovkg@mail.gmail.com' \
    --to=dnlplm@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=mhi@lists.linux.dev \
    --cc=quic_jhugo@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.