From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758540AbcJYI7p (ORCPT ); Tue, 25 Oct 2016 04:59:45 -0400 Received: from smtp.csie.ntu.edu.tw ([140.112.30.61]:53218 "EHLO smtp.csie.ntu.edu.tw" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752323AbcJYI7n (ORCPT ); Tue, 25 Oct 2016 04:59:43 -0400 MIME-Version: 1.0 In-Reply-To: <0b5fbe8e-e51b-c874-e1a3-0b88dc65e361@codeaurora.org> References: <20161020034344.14154-1-wens@csie.org> <20161020034344.14154-2-wens@csie.org> <0b5fbe8e-e51b-c874-e1a3-0b88dc65e361@codeaurora.org> From: Chen-Yu Tsai Date: Tue, 25 Oct 2016 16:59:17 +0800 X-Gmail-Original-Message-ID: Message-ID: Subject: Re: [PATCH v2 1/8] drm/bridge: rgb-to-vga: Support an enable GPIO To: Archit Taneja Cc: Chen-Yu Tsai , Maxime Ripard , David Airlie , Rob Herring , Mark Rutland , devicetree , linux-sunxi , dri-devel , linux-kernel , linux-arm-kernel Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, Oct 25, 2016 at 4:09 PM, Archit Taneja wrote: > Hi, > > On 10/20/2016 09:13 AM, Chen-Yu Tsai wrote: >> >> Some rgb-to-vga bridges have an enable GPIO, either directly tied to >> an enable pin on the bridge IC, or indirectly controlling a power >> switch. >> >> Add support for it. > > > Does the bridge on your platform have an active/passive DAC, or is it a > smarter encoder chip that is capable of doing more? If so, it might be > good to have a separate DT compatible string to it, like what's done > in the patch titled: > > drm: bridge: vga-dac: Add adi,adv7123 compatible string > > so that we can switch to a different driver later if needed. The chip is GM7123. It is not configurable. It just takes the LCD RGB/SYNC signals and converts them to analog. The only things you can change are putting it into sleep mode and tweaking the output drive strength by changing the external reference resistor. The latter would be a hardware design decision. I would say this qualifies as "dumb". I revisited the board schematics, and the enable GPIO actually toggles an external LDO regulator. So this might be better modeled as a regulator supply? Thanks ChenYu > > Thanks, > Archit > > >> >> Signed-off-by: Chen-Yu Tsai >> --- >> .../bindings/display/bridge/dumb-vga-dac.txt | 2 ++ >> drivers/gpu/drm/bridge/dumb-vga-dac.c | 28 >> ++++++++++++++++++++++ >> 2 files changed, 30 insertions(+) >> >> diff --git >> a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> index 003bc246a270..d3484822bf77 100644 >> --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> @@ -16,6 +16,8 @@ graph bindings specified in >> Documentation/devicetree/bindings/graph.txt. >> - Video port 0 for RGB input >> - Video port 1 for VGA output >> >> +Optional properties: >> +- enable-gpios: GPIO pin to enable or disable the bridge >> >> Example >> ------- >> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c >> b/drivers/gpu/drm/bridge/dumb-vga-dac.c >> index afec232185a7..b487e5e9b56d 100644 >> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c >> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c >> @@ -10,6 +10,7 @@ >> * the License, or (at your option) any later version. >> */ >> >> +#include >> #include >> #include >> >> @@ -23,6 +24,7 @@ struct dumb_vga { >> struct drm_connector connector; >> >> struct i2c_adapter *ddc; >> + struct gpio_desc *enable_gpio; >> }; >> >> static inline struct dumb_vga * >> @@ -124,8 +126,26 @@ static int dumb_vga_attach(struct drm_bridge *bridge) >> return 0; >> } >> >> +static void dumb_vga_enable(struct drm_bridge *bridge) >> +{ >> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge); >> + >> + if (vga->enable_gpio) >> + gpiod_set_value_cansleep(vga->enable_gpio, 1); >> +} >> + >> +static void dumb_vga_disable(struct drm_bridge *bridge) >> +{ >> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge); >> + >> + if (vga->enable_gpio) >> + gpiod_set_value_cansleep(vga->enable_gpio, 0); >> +} >> + >> static const struct drm_bridge_funcs dumb_vga_bridge_funcs = { >> .attach = dumb_vga_attach, >> + .enable = dumb_vga_enable, >> + .disable = dumb_vga_disable, >> }; >> >> static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev) >> @@ -169,6 +189,14 @@ static int dumb_vga_probe(struct platform_device >> *pdev) >> return -ENOMEM; >> platform_set_drvdata(pdev, vga); >> >> + vga->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", >> + GPIOD_OUT_LOW); >> + if (IS_ERR(vga->enable_gpio)) { >> + ret = PTR_ERR(vga->enable_gpio); >> + dev_err(&pdev->dev, "failed to request GPIO: %d\n", ret); >> + return ret; >> + } >> + >> vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev); >> if (IS_ERR(vga->ddc)) { >> if (PTR_ERR(vga->ddc) == -ENODEV) { >> > > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > a Linux Foundation Collaborative Project From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: Re: [PATCH v2 1/8] drm/bridge: rgb-to-vga: Support an enable GPIO Date: Tue, 25 Oct 2016 16:59:17 +0800 Message-ID: References: <20161020034344.14154-1-wens@csie.org> <20161020034344.14154-2-wens@csie.org> <0b5fbe8e-e51b-c874-e1a3-0b88dc65e361@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: <0b5fbe8e-e51b-c874-e1a3-0b88dc65e361-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Archit Taneja Cc: Chen-Yu Tsai , Maxime Ripard , David Airlie , Rob Herring , Mark Rutland , devicetree , linux-sunxi , dri-devel , linux-kernel , linux-arm-kernel List-Id: devicetree@vger.kernel.org On Tue, Oct 25, 2016 at 4:09 PM, Archit Taneja wrote: > Hi, > > On 10/20/2016 09:13 AM, Chen-Yu Tsai wrote: >> >> Some rgb-to-vga bridges have an enable GPIO, either directly tied to >> an enable pin on the bridge IC, or indirectly controlling a power >> switch. >> >> Add support for it. > > > Does the bridge on your platform have an active/passive DAC, or is it a > smarter encoder chip that is capable of doing more? If so, it might be > good to have a separate DT compatible string to it, like what's done > in the patch titled: > > drm: bridge: vga-dac: Add adi,adv7123 compatible string > > so that we can switch to a different driver later if needed. The chip is GM7123. It is not configurable. It just takes the LCD RGB/SYNC signals and converts them to analog. The only things you can change are putting it into sleep mode and tweaking the output drive strength by changing the external reference resistor. The latter would be a hardware design decision. I would say this qualifies as "dumb". I revisited the board schematics, and the enable GPIO actually toggles an external LDO regulator. So this might be better modeled as a regulator supply? Thanks ChenYu > > Thanks, > Archit > > >> >> Signed-off-by: Chen-Yu Tsai >> --- >> .../bindings/display/bridge/dumb-vga-dac.txt | 2 ++ >> drivers/gpu/drm/bridge/dumb-vga-dac.c | 28 >> ++++++++++++++++++++++ >> 2 files changed, 30 insertions(+) >> >> diff --git >> a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> index 003bc246a270..d3484822bf77 100644 >> --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> @@ -16,6 +16,8 @@ graph bindings specified in >> Documentation/devicetree/bindings/graph.txt. >> - Video port 0 for RGB input >> - Video port 1 for VGA output >> >> +Optional properties: >> +- enable-gpios: GPIO pin to enable or disable the bridge >> >> Example >> ------- >> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c >> b/drivers/gpu/drm/bridge/dumb-vga-dac.c >> index afec232185a7..b487e5e9b56d 100644 >> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c >> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c >> @@ -10,6 +10,7 @@ >> * the License, or (at your option) any later version. >> */ >> >> +#include >> #include >> #include >> >> @@ -23,6 +24,7 @@ struct dumb_vga { >> struct drm_connector connector; >> >> struct i2c_adapter *ddc; >> + struct gpio_desc *enable_gpio; >> }; >> >> static inline struct dumb_vga * >> @@ -124,8 +126,26 @@ static int dumb_vga_attach(struct drm_bridge *bridge) >> return 0; >> } >> >> +static void dumb_vga_enable(struct drm_bridge *bridge) >> +{ >> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge); >> + >> + if (vga->enable_gpio) >> + gpiod_set_value_cansleep(vga->enable_gpio, 1); >> +} >> + >> +static void dumb_vga_disable(struct drm_bridge *bridge) >> +{ >> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge); >> + >> + if (vga->enable_gpio) >> + gpiod_set_value_cansleep(vga->enable_gpio, 0); >> +} >> + >> static const struct drm_bridge_funcs dumb_vga_bridge_funcs = { >> .attach = dumb_vga_attach, >> + .enable = dumb_vga_enable, >> + .disable = dumb_vga_disable, >> }; >> >> static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev) >> @@ -169,6 +189,14 @@ static int dumb_vga_probe(struct platform_device >> *pdev) >> return -ENOMEM; >> platform_set_drvdata(pdev, vga); >> >> + vga->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", >> + GPIOD_OUT_LOW); >> + if (IS_ERR(vga->enable_gpio)) { >> + ret = PTR_ERR(vga->enable_gpio); >> + dev_err(&pdev->dev, "failed to request GPIO: %d\n", ret); >> + return ret; >> + } >> + >> vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev); >> if (IS_ERR(vga->ddc)) { >> if (PTR_ERR(vga->ddc) == -ENODEV) { >> > > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Tue, 25 Oct 2016 16:59:17 +0800 Subject: [PATCH v2 1/8] drm/bridge: rgb-to-vga: Support an enable GPIO In-Reply-To: <0b5fbe8e-e51b-c874-e1a3-0b88dc65e361@codeaurora.org> References: <20161020034344.14154-1-wens@csie.org> <20161020034344.14154-2-wens@csie.org> <0b5fbe8e-e51b-c874-e1a3-0b88dc65e361@codeaurora.org> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Oct 25, 2016 at 4:09 PM, Archit Taneja wrote: > Hi, > > On 10/20/2016 09:13 AM, Chen-Yu Tsai wrote: >> >> Some rgb-to-vga bridges have an enable GPIO, either directly tied to >> an enable pin on the bridge IC, or indirectly controlling a power >> switch. >> >> Add support for it. > > > Does the bridge on your platform have an active/passive DAC, or is it a > smarter encoder chip that is capable of doing more? If so, it might be > good to have a separate DT compatible string to it, like what's done > in the patch titled: > > drm: bridge: vga-dac: Add adi,adv7123 compatible string > > so that we can switch to a different driver later if needed. The chip is GM7123. It is not configurable. It just takes the LCD RGB/SYNC signals and converts them to analog. The only things you can change are putting it into sleep mode and tweaking the output drive strength by changing the external reference resistor. The latter would be a hardware design decision. I would say this qualifies as "dumb". I revisited the board schematics, and the enable GPIO actually toggles an external LDO regulator. So this might be better modeled as a regulator supply? Thanks ChenYu > > Thanks, > Archit > > >> >> Signed-off-by: Chen-Yu Tsai >> --- >> .../bindings/display/bridge/dumb-vga-dac.txt | 2 ++ >> drivers/gpu/drm/bridge/dumb-vga-dac.c | 28 >> ++++++++++++++++++++++ >> 2 files changed, 30 insertions(+) >> >> diff --git >> a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> index 003bc246a270..d3484822bf77 100644 >> --- a/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> +++ b/Documentation/devicetree/bindings/display/bridge/dumb-vga-dac.txt >> @@ -16,6 +16,8 @@ graph bindings specified in >> Documentation/devicetree/bindings/graph.txt. >> - Video port 0 for RGB input >> - Video port 1 for VGA output >> >> +Optional properties: >> +- enable-gpios: GPIO pin to enable or disable the bridge >> >> Example >> ------- >> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c >> b/drivers/gpu/drm/bridge/dumb-vga-dac.c >> index afec232185a7..b487e5e9b56d 100644 >> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c >> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c >> @@ -10,6 +10,7 @@ >> * the License, or (at your option) any later version. >> */ >> >> +#include >> #include >> #include >> >> @@ -23,6 +24,7 @@ struct dumb_vga { >> struct drm_connector connector; >> >> struct i2c_adapter *ddc; >> + struct gpio_desc *enable_gpio; >> }; >> >> static inline struct dumb_vga * >> @@ -124,8 +126,26 @@ static int dumb_vga_attach(struct drm_bridge *bridge) >> return 0; >> } >> >> +static void dumb_vga_enable(struct drm_bridge *bridge) >> +{ >> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge); >> + >> + if (vga->enable_gpio) >> + gpiod_set_value_cansleep(vga->enable_gpio, 1); >> +} >> + >> +static void dumb_vga_disable(struct drm_bridge *bridge) >> +{ >> + struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge); >> + >> + if (vga->enable_gpio) >> + gpiod_set_value_cansleep(vga->enable_gpio, 0); >> +} >> + >> static const struct drm_bridge_funcs dumb_vga_bridge_funcs = { >> .attach = dumb_vga_attach, >> + .enable = dumb_vga_enable, >> + .disable = dumb_vga_disable, >> }; >> >> static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev) >> @@ -169,6 +189,14 @@ static int dumb_vga_probe(struct platform_device >> *pdev) >> return -ENOMEM; >> platform_set_drvdata(pdev, vga); >> >> + vga->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", >> + GPIOD_OUT_LOW); >> + if (IS_ERR(vga->enable_gpio)) { >> + ret = PTR_ERR(vga->enable_gpio); >> + dev_err(&pdev->dev, "failed to request GPIO: %d\n", ret); >> + return ret; >> + } >> + >> vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev); >> if (IS_ERR(vga->ddc)) { >> if (PTR_ERR(vga->ddc) == -ENODEV) { >> > > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > a Linux Foundation Collaborative Project