All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ramon Fried <rfried.dev@gmail.com>
To: "Marek Behún" <kabel@kernel.org>
Cc: "Joe Hershberger" <joe.hershberger@ni.com>,
	"U-Boot Mailing List" <u-boot@lists.denx.de>,
	"Marek Behún" <marek.behun@nic.cz>,
	"Bin Meng" <bmeng.cn@gmail.com>,
	"Chen Guanqiao" <chenguanqiao@kuaishou.com>,
	"Dario Binacchi" <dariobin@libero.it>,
	"Jagan Teki" <jagan@amarulasolutions.com>,
	"Kishon Vijay Abraham I" <kishon@ti.com>,
	"Leo Yu-Chi Liang" <ycliang@andestech.com>,
	"Lokesh Vutla" <lokeshvutla@ti.com>,
	"Michael Walle" <michael@walle.cc>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Patrick Delaunay" <patrick.delaunay@foss.st.com>,
	"Priyanka Jain" <priyanka.jain@nxp.com>,
	"Simon Glass" <sjg@chromium.org>,
	"Vladimir Oltean" <vladimir.oltean@nxp.com>
Subject: Re: [PATCH u-boot-net 03/14] net: introduce helpers to get PHY ofnode from MAC
Date: Fri, 18 Mar 2022 10:02:53 +0200	[thread overview]
Message-ID: <CAGi-RU+LdfvhJ3et+dj30Nh2Rhq2-8ni3ZGxtkFEE8j1SHB7iw@mail.gmail.com> (raw)
In-Reply-To: <20220317124958.27921-4-kabel@kernel.org>

On Thu, Mar 17, 2022 at 2:50 PM Marek Behún <kabel@kernel.org> wrote:
>
> From: Marek Behún <marek.behun@nic.cz>
>
> Add helpers ofnode_get_phy_node() and dev_get_phy_node() and use it in
> net/mdio-uclass.c function dm_eth_connect_phy_handle().
>
> This is useful because other part's of U-Boot may want to get PHY ofnode
> without connecting a PHY.
>
> Signed-off-by: Marek Behún <marek.behun@nic.cz>
> ---
>  drivers/core/ofnode.c | 21 +++++++++++++++++++++
>  drivers/core/read.c   |  5 +++++
>  include/dm/ofnode.h   | 14 ++++++++++++++
>  include/dm/read.h     | 19 +++++++++++++++++++
>  net/mdio-uclass.c     | 24 ++++++------------------
>  5 files changed, 65 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c
> index 709bea272a..eaad2c989b 100644
> --- a/drivers/core/ofnode.c
> +++ b/drivers/core/ofnode.c
> @@ -1162,3 +1162,24 @@ const char *ofnode_conf_read_str(const char *prop_name)
>
>         return ofnode_read_string(node, prop_name);
>  }
> +
> +ofnode ofnode_get_phy_node(ofnode node)
> +{
> +       /* DT node properties that reference a PHY node */
> +       static const char * const phy_handle_str[] = {
> +               "phy-handle", "phy", "phy-device",
> +       };
> +       struct ofnode_phandle_args args = {
> +               .node = ofnode_null()
> +       };
> +       int i;
> +
> +       assert(ofnode_valid(node));
> +
> +       for (i = 0; i < ARRAY_SIZE(phy_handle_str); i++)
> +               if (!ofnode_parse_phandle_with_args(node, phy_handle_str[i],
> +                                                   NULL, 0, 0, &args))
> +                       break;
> +
> +       return args.node;
> +}
> diff --git a/drivers/core/read.c b/drivers/core/read.c
> index 31f9e78a06..7ff100218d 100644
> --- a/drivers/core/read.c
> +++ b/drivers/core/read.c
> @@ -398,3 +398,8 @@ int dev_decode_display_timing(const struct udevice *dev, int index,
>  {
>         return ofnode_decode_display_timing(dev_ofnode(dev), index, config);
>  }
> +
> +ofnode dev_get_phy_node(const struct udevice *dev)
> +{
> +       return ofnode_get_phy_node(dev_ofnode(dev));
> +}
> diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h
> index 0cb324c8b0..8164386043 100644
> --- a/include/dm/ofnode.h
> +++ b/include/dm/ofnode.h
> @@ -1204,4 +1204,18 @@ int ofnode_conf_read_int(const char *prop_name, int default_val);
>   */
>  const char *ofnode_conf_read_str(const char *prop_name);
>
> +/**
> + * ofnode_get_phy_node() - Get PHY node for a MAC (if not fixed-link)
> + *
> + * This function parses PHY handle from the Ethernet controller's ofnode
> + * (trying all possible PHY handle property names), and returns the PHY ofnode.
> + *
> + * Before this is used, ofnode_phy_is_fixed_link() should be checked first, and
> + * if the result to that is true, this function should not be called.
> + *
> + * @eth_node:  ofnode belonging to the Ethernet controller
> + * Return: ofnode of the PHY, if it exists, otherwise an invalid ofnode
> + */
> +ofnode ofnode_get_phy_node(ofnode eth_node);
> +
>  #endif
> diff --git a/include/dm/read.h b/include/dm/read.h
> index 233af3c063..899eb813fd 100644
> --- a/include/dm/read.h
> +++ b/include/dm/read.h
> @@ -743,6 +743,20 @@ int dev_read_pci_bus_range(const struct udevice *dev, struct resource *res);
>  int dev_decode_display_timing(const struct udevice *dev, int index,
>                               struct display_timing *config);
>
> +/**
> + * dev_get_phy_node() - Get PHY node for a MAC (if not fixed-link)
> + *
> + * This function parses PHY handle from the Ethernet controller's ofnode
> + * (trying all possible PHY handle property names), and returns the PHY ofnode.
> + *
> + * Before this is used, ofnode_phy_is_fixed_link() should be checked first, and
> + * if the result to that is true, this function should not be called.
> + *
> + * @dev: device representing the MAC
> + * Return: ofnode of the PHY, if it exists, otherwise an invalid ofnode
> + */
> +ofnode dev_get_phy_node(const struct udevice *dev);
> +
>  #else /* CONFIG_DM_DEV_READ_INLINE is enabled */
>  #include <asm/global_data.h>
>
> @@ -1092,6 +1106,11 @@ static inline int dev_decode_display_timing(const struct udevice *dev,
>         return ofnode_decode_display_timing(dev_ofnode(dev), index, config);
>  }
>
> +static inline ofnode dev_get_phy_node(const struct udevice *dev)
> +{
> +       return ofnode_get_phy_node(dev_ofnode(dev));
> +}
> +
>  #endif /* CONFIG_DM_DEV_READ_INLINE */
>
>  /**
> diff --git a/net/mdio-uclass.c b/net/mdio-uclass.c
> index 649dc60f73..233b70171b 100644
> --- a/net/mdio-uclass.c
> +++ b/net/mdio-uclass.c
> @@ -20,11 +20,6 @@ static const char * const phy_mode_str[] = {
>         "phy-mode", "phy-connection-type"
>  };
>
> -/* DT node properties that reference a PHY node */
> -static const char * const phy_handle_str[] = {
> -       "phy-handle", "phy", "phy-device"
> -};
> -
>  void dm_mdio_probe_devices(void)
>  {
>         struct udevice *it;
> @@ -137,23 +132,16 @@ static struct phy_device *dm_eth_connect_phy_handle(struct udevice *ethdev,
>         u32 phy_addr;
>         struct udevice *mdiodev;
>         struct phy_device *phy;
> -       struct ofnode_phandle_args phandle = {.node = ofnode_null()};
>         ofnode phynode;
> -       int i;
>
>         if (CONFIG_IS_ENABLED(PHY_FIXED) &&
>             ofnode_phy_is_fixed_link(dev_ofnode(ethdev), &phynode)) {
>                 phy = phy_connect(NULL, 0, ethdev, interface);
> -               phandle.node = phynode;
>                 goto out;
>         }
>
> -       for (i = 0; i < ARRAY_SIZE(phy_handle_str); i++)
> -               if (!dev_read_phandle_with_args(ethdev, phy_handle_str[i], NULL,
> -                                               0, 0, &phandle))
> -                       break;
> -
> -       if (!ofnode_valid(phandle.node)) {
> +       phynode = dev_get_phy_node(ethdev);
> +       if (!ofnode_valid(phynode)) {
>                 dev_dbg(ethdev, "can't find PHY node\n");
>                 return NULL;
>         }
> @@ -162,16 +150,16 @@ static struct phy_device *dm_eth_connect_phy_handle(struct udevice *ethdev,
>          * reading 'reg' directly should be fine.  This is a PHY node, the
>          * address is always size 1 and requires no translation
>          */
> -       if (ofnode_read_u32(phandle.node, "reg", &phy_addr)) {
> +       if (ofnode_read_u32(phynode, "reg", &phy_addr)) {
>                 dev_dbg(ethdev, "missing reg property in phy node\n");
>                 return NULL;
>         }
>
>         if (uclass_get_device_by_ofnode(UCLASS_MDIO,
> -                                       ofnode_get_parent(phandle.node),
> +                                       ofnode_get_parent(phynode),
>                                         &mdiodev)) {
>                 dev_dbg(ethdev, "can't find MDIO bus for node %s\n",
> -                       ofnode_get_name(ofnode_get_parent(phandle.node)));
> +                       ofnode_get_name(ofnode_get_parent(phynode)));
>                 return NULL;
>         }
>
> @@ -179,7 +167,7 @@ static struct phy_device *dm_eth_connect_phy_handle(struct udevice *ethdev,
>
>  out:
>         if (phy)
> -               phy->node = phandle.node;
> +               phy->node = phynode;
>
>         return phy;
>  }
> --
> 2.34.1
>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>

  reply	other threads:[~2022-03-18  8:03 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-17 12:49 [PATCH u-boot-net 00/14] u-boot-net refactors, fixes, cleanups Marek Behún
2022-03-17 12:49 ` [PATCH u-boot-net 01/14] net: mdio-uclass: fix type for phy_mode_str and phy_handle_str Marek Behún
2022-03-18  7:54   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 02/14] net: mdio-uclass: use ARRAY_SIZE() Marek Behún
2022-03-18  7:55   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 03/14] net: introduce helpers to get PHY ofnode from MAC Marek Behún
2022-03-18  8:02   ` Ramon Fried [this message]
2022-03-28  6:35   ` Simon Glass
2022-03-28 21:51     ` Marek Behún
2022-03-17 12:49 ` [PATCH u-boot-net 04/14] net: mdio-uclass: add wrappers for read/write/reset operations Marek Behún
2022-03-18  8:00   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 05/14] treewide: use dm_mdio_read/write/reset() wrappers Marek Behún
2022-03-18  8:04   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 06/14] net: phy: fix parsing wrong property Marek Behún
2022-03-18  8:05   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 07/14] net: introduce helpers to get PHY interface mode from a device/ofnode Marek Behún
2022-03-18  8:07   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 08/14] treewide: Rename PHY_INTERFACE_MODE_COUNT to PHY_INTERFACE_MODE_MAX Marek Behún
2022-03-18  7:34   ` Stefan Roese
2022-03-17 12:49 ` [PATCH u-boot-net 09/14] treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA Marek Behún
2022-03-18  7:34   ` Stefan Roese
2022-03-18  8:07   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 10/14] phy: Move PHY_INTERFACE_MODE_NA to the beginning of the enum definition Marek Behún
2022-03-18  7:34   ` Stefan Roese
2022-03-18  8:08   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 11/14] net: phy: xilinx: Check interface type in ->config(), not ->probe() Marek Behún
2022-03-18  8:09   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 12/14] net: phy: use ->is_c45 instead of is_10g_interface() Marek Behún
2022-03-18  8:10   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 13/14] bcmgenet, sun8i_emac: Don't connect PHY two times Marek Behún
2022-03-18  8:10   ` Ramon Fried
2022-03-17 12:49 ` [PATCH u-boot-net 14/14] net: phy: don't require PHY interface mode during PHY creation Marek Behún
2022-03-18  8:12   ` Ramon Fried
2022-03-18  8:13 ` [PATCH u-boot-net 00/14] u-boot-net refactors, fixes, cleanups Ramon Fried

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAGi-RU+LdfvhJ3et+dj30Nh2Rhq2-8ni3ZGxtkFEE8j1SHB7iw@mail.gmail.com \
    --to=rfried.dev@gmail.com \
    --cc=bmeng.cn@gmail.com \
    --cc=chenguanqiao@kuaishou.com \
    --cc=dariobin@libero.it \
    --cc=jagan@amarulasolutions.com \
    --cc=joe.hershberger@ni.com \
    --cc=kabel@kernel.org \
    --cc=kishon@ti.com \
    --cc=lokeshvutla@ti.com \
    --cc=marek.behun@nic.cz \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=patrick.delaunay@foss.st.com \
    --cc=priyanka.jain@nxp.com \
    --cc=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    --cc=vladimir.oltean@nxp.com \
    --cc=ycliang@andestech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.