From mboxrd@z Thu Jan  1 00:00:00 1970
From: Yegor Yefremov <yegorslists@googlemail.com>
Date: Tue, 3 Jan 2017 11:56:40 +0100
Subject: [U-Boot] am335x board i2c_probe fails from nand boot
In-Reply-To: <CADnUhn0-XvCB0B9n-w+1rNfdWWNBgo31X0tkFRNv+j+ZPGcDAw@mail.gmail.com>
References: <CADnUhn0-XvCB0B9n-w+1rNfdWWNBgo31X0tkFRNv+j+ZPGcDAw@mail.gmail.com>
Message-ID: <CAGm1_ktyZHiEkb4OPXn7c9AaBVrrJWDQWO2neaVd1M60sNEQYw@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Matti,

On Tue, Jan 3, 2017 at 10:26 AM, matti kaasinen
<matti.kaasinen@gmail.com> wrote:
> Hi!
>
> Would anyone have idea why spl boot fails in i2c_probe when running from
> nand but not when running from mmc card or anything at all to check?
>
> My card is am335x based board with u-boot coming from u-boot-it v2016.05.
>
> Spl boot crashes when it tries to run i2c_probe getting timeout in
> omap24.._i2c.c/wait_for_event() function. Boot enters wait_for_event() only
> once, if spl boot is coming from nand and exiting with:
> "Timed out in wait_for_event: status=0000
> Check if pads/pull-ups of bus are properly configured",
>
> However, if spl comes from mmc card, everything goes well, wait_for_event
> is executed tens of times without problem.
>
> All help very well appreciated!!

What PMIC are you using?

Yegor