Re: [Alsa-user] intel-hda: sound via HDMI only when using interlaced modes

From: Jasper Smet <josbeir@gmail.com>
To: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Alsa-user] intel-hda: sound via HDMI only when using interlaced modes
Date: Thu, 10 Oct 2013 08:59:04 +0200	[thread overview]
Message-ID: <CAGpEb3Ems_jNtY9JbeSsa4dHO+ajE-x54D4SeXxeCfCeTfDndw@mail.gmail.com> (raw)
In-Reply-To: <871u3t653i.fsf@intel.com>

I managed do this quickly before i got off to work:

Dmesg output with directly connected to the tv: http://sprunge.us/EhJD

Neither the VSX-928 nor the TV (passtrough) pick up sound when
connected to the AV receiver.

I noticed that when i set the resolution to 1080i@30 sound works on
the receiver but not on the TV, everything lower works fine in both
passtrough and with the receiver powered on.

Only when using 1080p24 or lower everything then works fine on both devices..

Hope this helps.

On Thu, Oct 10, 2013 at 7:57 AM, Jani Nikula
<jani.nikula@linux.intel.com> wrote:
> On Wed, 09 Oct 2013, Jasper Smet <josbeir@gmail.com> wrote:
>> As promissed i added the params to the kernel boot and here's the
>> dmesg output with debugging enabled:
>>
>> http://sprunge.us/iEQR
>
> Similar dmesg for when you connect directly to the tv (and audio works)
> might prove useful.
>
> Is your expectation that the VSX-928 picks up the sound, or pass through
> to the tv? Is it possible to try both (I honestly don't know)?
>
> It might prove useful to file a bug on DRM/Intel at [1] to track
> this. Then it won't get lost even if this thread quiets down.
>
>
> Thanks,
> Jani.
>
>
> [1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI
>
>
>>
>> Hope this helps!
>>
>> On Wed, Oct 9, 2013 at 1:28 PM, Jasper Smet <josbeir@gmail.com> wrote:
>>> Ok will pass the info when i get home later this day.
>>>
>>> On Wed, Oct 9, 2013 at 1:01 PM, Daniel Vetter <daniel@ffwll.ch> wrote:
>>>> On Wed, Oct 09, 2013 at 12:44:10PM +0200, Jasper Smet wrote:
>>>>> Sorry,
>>>>>
>>>>> Intel NUC NUC Kit DC3217BY (Ivy bridge HD4000) Connected via HDMI to
>>>>> my Pioneer VSX-928 which is then connected to my Panasonic tv
>>>>>
>>>>> Running latest stable Openelec build (3.2.2). (tried different builds
>>>>> using stable/unstable drivers)
>>>>
>>>> That's really old ... Can you please test on something more modern? We
>>>> made tons of fixes to the hdmi infoframe code.
>>>>>
>>>>> Here are some logs i pulled while i was debugging the issue with one
>>>>> of the OpenElec developers.
>>>>>
>>>>> xbmc log (shows ALSA enumeration): http://sprunge.us/YJHc
>>>>> alsa playback devices: http://sprunge.us/KZKX
>>>>> xrandr modes: http://sprunge.us/DhFK
>>>>> dmesg: http://sprunge.us/XRGP
>>>>
>>>> When you have a new kernel please boot with drm.debug=0xe added to your
>>>> kernel cmdline and then grab the dmesg. Otherwise all the useful gfx debug
>>>> noise isn't in there.
>>>> -Daniel
>>>> --
>>>> Daniel Vetter
>>>> Software Engineer, Intel Corporation
>>>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
>>>
>>>
>>>
>>> --
>>> Met Vriendelijke Groeten
>>>
>>> Jasper Smet
>>> Developer
>>>
>>> Twitter: josbeir
>>> E-mail: josbeir@gmail.com
>>> Mobile: 0486/41.75.45
>>
>>
>>
>> --
>> Met Vriendelijke Groeten
>>
>> Jasper Smet
>> Developer
>>
>> Twitter: josbeir
>> E-mail: josbeir@gmail.com
>> Mobile: 0486/41.75.45
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Jani Nikula, Intel Open Source Technology Center

-- 
Met Vriendelijke Groeten

Jasper Smet
Developer

Twitter: josbeir
E-mail: josbeir@gmail.com
Mobile: 0486/41.75.45