Hi,

I have found for long time ago that CPUTIN temperature is not showed
correctly by sensors command:

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +34.0°C  (high = +80.0°C, crit = +98.0°C)
Core 0:         +30.0°C  (high = +80.0°C, crit = +98.0°C)
...
nct6776-isa-0290
Adapter: ISA adapter
...
CPUTIN:        -60.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = diode
...

I have cheked it in BIOS and in AI Suite in windows 7 64 bit and consulted
it with ASUS technical support and everything is working properly.
So , hardware is fine. Software in windows is fine. Only linux software is
not correct.
I have tried to detect-sensor many times and it is still the same.
If there is some kind of tweak in config please let me know but it seems to
me there is something wrong with lm-sensors 3.3.1.

...
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
...
Found `Nuvoton NCT6776F Super IO Sensors'                   Success!
...
Driver `w83627ehf':
  * ISA bus, address 0x290
    Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9)

Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)
...

my /etc/modules:
...
coretemp
w83627ehf
...

This error have appeared on maximus iv extreme motherboard Revision 3 ,
BIOS from 1404 to 3202 (latest)
linux ubuntu natty -> oneiric 64 bit kernel from 2.6.39 up to 3.0.0-19
commercial version (tested on 3.3.1 compiled by me)

Could you please help me to solve it ?

Thank you very much for any clue.
Kind Regards,
Martin