I have had in mind CPUTIN which is showing in lm-sensors -60 Celsius.
(  it is all described more detailed in my previous posts.)
Just small info :-)

On Fri, Apr 20, 2012 at 4:22 PM, Guenter Roeck
<guenter.roeck@ericsson.com>wrote:

> On Fri, 2012-04-20 at 06:47 -0400, Martin Suchanek wrote:
> > Hi,
> >
> > Add info:
> > I have found software called open hardware monitor. I have been
> > testing it in windows for couple of days and it works properly with
> > Nuvoton NST6776F chip. I have been comparing results with AI Suite
> > software coming from ASUS and results are corresponding and measuring
> > is with big precise. So , you can have a look to source code and
> > compare with your driver. This software should work on linux as well
> > but I did not try it yet but I will.
> >
> > (I did not tried your experimental driver yet but I will)
> >
> Martin,
>
> please don't top-post.
>
> What is the output you get with open hardware monitor ? They report four
> temperatures, PECI_0, CPUTIN, AUXTIN, and SYSTIN.
>
> Thanks,
> Guenter
>
> > Regards,
> > Martin
> >
> >
> > On Sat, Apr 14, 2012 at 2:09 PM, Martin Suchanek
> > <martin.suc@googlemail.com> wrote:
> >         Hi,
> >
> >         I have found for long time ago that CPUTIN temperature is not
> >         showed correctly by sensors command:
> >
> >         coretemp-isa-0000
> >         Adapter: ISA adapter
> >         Physical id 0:  +34.0°C  (high = +80.0°C, crit = +98.0°C)
> >         Core 0:         +30.0°C  (high = +80.0°C, crit = +98.0°C)
> >         ...
> >         nct6776-isa-0290
> >         Adapter: ISA adapter
> >         ...
> >         CPUTIN:        -60.0°C  (high = +80.0°C, hyst = +75.0°C)
> >         sensor = diode
> >         ...
> >
> >         I have cheked it in BIOS and in AI Suite in windows 7 64 bit
> >         and consulted it with ASUS technical support and everything is
> >         working properly.
> >         So , hardware is fine. Software in windows is fine. Only linux
> >         software is not correct.
> >         I have tried to detect-sensor many times and it is still the
> >         same.
> >         If there is some kind of tweak in config please let me know
> >         but it seems to me there is something wrong with lm-sensors
> >         3.3.1.
> >
> >         ...
> >         Intel digital thermal sensor...
> >         Success!
> >             (driver `coretemp')
> >         ...
> >         Found `Nuvoton NCT6776F Super IO Sensors'
> >         Success!
> >         ...
> >         Driver `w83627ehf':
> >           * ISA bus, address 0x290
> >             Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9)
> >
> >         Driver `coretemp':
> >           * Chip `Intel digital thermal sensor' (confidence: 9)
> >         ...
> >
> >         my /etc/modules:
> >         ...
> >         coretemp
> >         w83627ehf
> >         ...
> >
> >         This error have appeared on maximus iv extreme motherboard
> >         Revision 3 , BIOS from 1404 to 3202 (latest)
> >         linux ubuntu natty -> oneiric 64 bit kernel from 2.6.39 up to
> >         3.0.0-19 commercial version (tested on 3.3.1 compiled by me)
> >
> >         Could you please help me to solve it ?
> >
> >         Thank you very much for any clue.
> >         Kind Regards,
> >         Martin
> >
> >
>
>
>