Re: [PATCH 1/2] dt-bindings: phy: qcom,qmp: Mark '#clock-cells' as a 'optional' property

[Bhupesh Sharma <bhupesh.sharma@linaro.org>]

Hi Dmitry,

Thanks for your review comments.

On Thu, 24 Feb 2022 at 20:22, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Thu, 24 Feb 2022 at 15:33, Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote:
> >
> > Since '#clock-cells' is not a required property for several
> > QCoM boards supporting qmp-phy(s) (for e.g. sm8150, sm8250 or sm8350 SoC
> > based boards), mark it as an optional property instead.
>
> I believe the description is not correct. the clock-cells should not
> be used at all, so it should be removed from the root node.

Hmm.. 'clock-cells' is still used for describing qmp phy pcie nodes for certain
devices like 'msm8996.dtsi'. I am not sure if removing it would impact existing
dts files. But let me try cleaning them up in v2.

> Also we should describe phy@ properties.

Sure, I will add them in v2.

Regards,
Bhupesh

> >
> > This fixes the following '$ make dtbs_check' warning(s):
> >
> > sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
> >   '#clock-cells' is a required property
> >
> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Cc: Vinod Koul <vkoul@kernel.org>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> >  Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 -
> >  1 file changed, 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> > index 9e0f60e682c4..746a929c63bb 100644
> > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> > @@ -115,7 +115,6 @@ patternProperties:
> >  required:
> >    - compatible
> >    - reg
> > -  - "#clock-cells"
> >    - "#address-cells"
> >    - "#size-cells"
> >    - ranges
> > --
> > 2.35.1
> >
>
>
> --
> With best wishes
> Dmitry