All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH] Revert "mmc: davinci: drop struct davinci_mmc_plat"
Date: Fri, 3 Jan 2020 12:56:06 -0600	[thread overview]
Message-ID: <CAHCN7xJE=rWHHK21wEzdrj=OCS6-RxFm_rJfSxD6QzsyeEgu7w@mail.gmail.com> (raw)
In-Reply-To: <20200103181707.6779-1-trini@konsulko.com>

On Fri, Jan 3, 2020 at 12:17 PM Tom Rini <trini@konsulko.com> wrote:
>
> Adam Ford reports that this change breaks booting on da850-evm and
> Bartosz Golaszewski agrees that with the impending release we should
> revert the change for now.  With that noted:
>
> This reverts commit 21a4d80a710c79053ac1deaa65ff9b69e6c031d4.
>

Tested-by: Adam Ford <aford173@gmail.com>

> Cc: Adam Ford <aford173@gmail.com>
> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
> Signed-off-by: Tom Rini <trini@konsulko.com>
> ---


>  drivers/mmc/davinci_mmc.c | 16 +++++++++++-----
>  1 file changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c
> index c3f7b57665d3..ef5cd4e7234f 100644
> --- a/drivers/mmc/davinci_mmc.c
> +++ b/drivers/mmc/davinci_mmc.c
> @@ -32,6 +32,10 @@ struct davinci_mmc_priv {
>         uint input_clk;         /* Input clock to MMC controller */
>         struct gpio_desc cd_gpio;       /* Card Detect GPIO */
>         struct gpio_desc wp_gpio;       /* Write Protect GPIO */
> +};
> +
> +struct davinci_mmc_plat
> +{
>         struct mmc_config cfg;
>         struct mmc mmc;
>  };
> @@ -480,8 +484,9 @@ int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host)
>  static int davinci_mmc_probe(struct udevice *dev)
>  {
>         struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> +       struct davinci_mmc_plat *plat = dev_get_platdata(dev);
>         struct davinci_mmc_priv *priv = dev_get_priv(dev);
> -       struct mmc_config *cfg = &priv->cfg;
> +       struct mmc_config *cfg = &plat->cfg;
>  #ifdef CONFIG_SPL_BUILD
>         int ret;
>  #endif
> @@ -502,7 +507,7 @@ static int davinci_mmc_probe(struct udevice *dev)
>         gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, GPIOD_IS_IN);
>  #endif
>
> -       upriv->mmc = &priv->mmc;
> +       upriv->mmc = &plat->mmc;
>
>  #ifdef CONFIG_SPL_BUILD
>         /*
> @@ -513,7 +518,7 @@ static int davinci_mmc_probe(struct udevice *dev)
>          * support in SPL, hence the hard-coded base register address.
>          */
>         priv->reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE;
> -       ret = mmc_bind(dev, &priv->mmc, &priv->cfg);
> +       ret = mmc_bind(dev, &plat->mmc, &plat->cfg);
>         if (ret)
>                 return ret;
>  #endif
> @@ -523,9 +528,9 @@ static int davinci_mmc_probe(struct udevice *dev)
>
>  static int davinci_mmc_bind(struct udevice *dev)
>  {
> -       struct davinci_mmc_priv *priv = dev_get_priv(dev);
> +       struct davinci_mmc_plat *plat = dev_get_platdata(dev);
>
> -       return mmc_bind(dev, &priv->mmc, &priv->cfg);
> +       return mmc_bind(dev, &plat->mmc, &plat->cfg);
>  }
>
>  static const struct udevice_id davinci_mmc_ids[] = {
> @@ -542,6 +547,7 @@ U_BOOT_DRIVER(davinci_mmc_drv) = {
>  #endif
>         .probe = davinci_mmc_probe,
>         .ops = &davinci_mmc_ops,
> +       .platdata_auto_alloc_size = sizeof(struct davinci_mmc_plat),
>         .priv_auto_alloc_size = sizeof(struct davinci_mmc_priv),
>  };
>  #endif
> --
> 2.17.1
>

  parent reply	other threads:[~2020-01-03 18:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-03 18:17 [PATCH] Revert "mmc: davinci: drop struct davinci_mmc_plat" Tom Rini
2020-01-03 18:42 ` Adam Ford
2020-01-03 18:56 ` Adam Ford [this message]
2020-01-05 13:36 ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHCN7xJE=rWHHK21wEzdrj=OCS6-RxFm_rJfSxD6QzsyeEgu7w@mail.gmail.com' \
    --to=aford173@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.