From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adam Ford Date: Fri, 23 Feb 2018 04:24:40 -0600 Subject: [U-Boot] [PATCH v2 0/4] mmc: omap_hsmmc: Reduce the footprint of the driver and fix am335x clock In-Reply-To: <1519378819-19867-1-git-send-email-jjhiblot@ti.com> References: <1519378819-19867-1-git-send-email-jjhiblot@ti.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, Feb 23, 2018 at 3:40 AM, Jean-Jacques Hiblot wrote: > > This series aims at reducing the footprint of the omap_hsmmc driver in > the SPL (1.5 kB gain in the case of the SPL for the am335x evm). > It also fixes an issue with the am335x_evm by setting a default maximum > frequency if none is defined in the dts. > > tested on am335x_evm, bbb, bbb (vboot), and dra7 evm > > I tested this version as well. This series fixes 2d7482cf793f ("mmc: omap_hsmmc: use mmc_of_parse to populate mmc_config") which made my DM3730 unable to probe the MMC. Tested-by: Adam Ford #omap3_logic > Changes in v2: > - Use a Kconfig option to compile out the ADMA support instead of relying > on the platform architecture > > Jean-Jacques Hiblot (4): > mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_plat > mmc: omap_hsmmc: compile out write support if not needed > mmc: omap_hsmmc: make it possible to compile out ADMA support > mmc: omap_hsmmc: use a default 52MHz max clock rate if none is > specified > > arch/arm/include/asm/omap_mmc.h | 2 +- > drivers/mmc/Kconfig | 9 +++++++++ > drivers/mmc/omap_hsmmc.c | 31 ++++++++++++++++++++----------- > 3 files changed, 30 insertions(+), 12 deletions(-) > > -- > 1.9.1 > >