From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 27 Oct 2020 08:25:57 +0100
Subject: [PATCH 0/4] Add support for I2C Legacy/FRU decoding
In-Reply-To: <cover.1603205426.git.michal.simek@xilinx.com>
References: <cover.1603205426.git.michal.simek@xilinx.com>
Message-ID: <CAHTX3d+HeRXXX8xEcOJ+mE8JnVCH4cm8Venhcuse=FHX6FX6Wg@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

?t 20. 10. 2020 v 16:50 odes?latel Michal Simek
<michal.simek@xilinx.com> napsal:
>
> Hi,
>
> the whole series add support for I2C based FRU eeprom board identification.
> EEPROMs are referenced by nvmem alias which was suggested by Rob Herring
> (dt maintainer). Previous code was using chosen xlnx,eeprom property.
> And because no platform is setting up nvmem alias the code is doing nothing
> on all boards.
>
> If you want to try it and test it just choose board and define nvmem
> aliases and you should see similar logs like this.
>
> zcu104 with legacy format and FRU on FMC
>
> U-Boot 2020.10-00835-g819dc03ff784 (Oct 20 2020 - 12:48:12 +0200)
>
> Model: ZynqMP ZCU104 RevC
> Board: Xilinx ZynqMP
> DRAM:  2 GiB
> PMUFW:  v1.1
> Xilinx I2C Legacy format at nvmem0:
>  Board name:    zcu104
>  Board rev:     c
>  Board SN:      895527361843-94820
>  Ethernet mac:  00:0a:35:04:eb:93
> Xilinx I2C FRU format at nvmem1:
>  Manufacturer Name: XILINX
>  Product Name: XXX-XXX
>  Serial No: 1231
>  Part Number: dd
>  File ID: U-Boot generator
>  Revision Number: rev_A
> EL Level:       EL2
> Chip ID:        zu7e
> WDT:   Started with servicing (60s timeout)
> NAND:  0 MiB
> MMC:   mmc at ff170000: 0
> Loading Environment from FAT... *** Warning - bad CRC, using default environment
>
> In:    serial at ff000000
> Out:   serial at ff000000
> Err:   serial at ff000000
> Bootmode: LVL_SHFT_SD_MODE1
> Reset reason:   EXTERNAL
> Net:
> ZYNQ GEM: ff0e0000, mdio bus ff0e0000, phyaddr 12, interface rgmii-id
> eth0: ethernet at ff0e0000
> Hit any key to stop autoboot:  0
> ZynqMP>
>
> Based on https://lists.denx.de/pipermail/u-boot/2020-October/429382.html
>
> Thanks,
> Michal
>
>
> Michal Simek (3):
>   xilinx: common: Add Makefile to common folder
>   xilinx: cmd: Add basic fru format generator
>   xilinx: board: Add FRU decoder support
>
> Siva Durga Prasad Paladugu (1):
>   xilinx: cmd: Add support for FRU commands
>
>  board/xilinx/Kconfig            |   8 +
>  board/xilinx/common/Makefile    |  10 +
>  board/xilinx/common/board.c     |  83 +++++++-
>  board/xilinx/common/fru.c       |  91 ++++++++
>  board/xilinx/common/fru.h       |  83 ++++++++
>  board/xilinx/common/fru_ops.c   | 362 ++++++++++++++++++++++++++++++++
>  board/xilinx/versal/Makefile    |   1 -
>  board/xilinx/zynq/Makefile      |   1 -
>  board/xilinx/zynqmp/MAINTAINERS |   1 +
>  board/xilinx/zynqmp/Makefile    |   1 -
>  10 files changed, 637 insertions(+), 4 deletions(-)
>  create mode 100644 board/xilinx/common/Makefile
>  create mode 100644 board/xilinx/common/fru.c
>  create mode 100644 board/xilinx/common/fru.h
>  create mode 100644 board/xilinx/common/fru_ops.c
>
> --
> 2.28.0
>

Applied.
M


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs