From mboxrd@z Thu Jan  1 00:00:00 1970
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 6 Apr 2020 13:00:26 +0200
Subject: [PATCH v2 0/4] ARM: zynq: Switch to CFI DM driver
In-Reply-To: <cover.1582713521.git.michal.simek@xilinx.com>
References: <cover.1582713521.git.michal.simek@xilinx.com>
Message-ID: <CAHTX3dJ96EKFO5mVN4CzdHneWisnUb_fMX2xyNJ0+fv7xBwfvA@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

st 26. 2. 2020 v 11:38 odes?latel Michal Simek <michal.simek@xilinx.com> napsal:
>
> Hi,
>
> this series is switching Zynq to DM based cfi driver. On regular u-boot
> this is described via SMCC but for cse it is enough to place just node to
> DT.
>
> Thanks,
> Michal
>
> Changes in v2:
> - Add missing zynq cse nor conversion
>
> Michal Simek (4):
>   nand: raw: Do not free xnand structure
>   nand: raw: zynq: Do not try to probe driver if nand flash is disabled
>   ARM: zynq: Do not report NOR flash detection failure
>   ARM: zynq: Enable DM for CFI NOR flash
>
>  arch/arm/dts/zynq-cse-nor.dts      | 14 ++++++++++++++
>  configs/xilinx_zynq_virt_defconfig |  1 +
>  configs/zynq_cse_nor_defconfig     |  3 +++
>  drivers/mtd/nand/raw/zynq_nand.c   | 25 ++++++++++++++-----------
>  include/configs/zynq-common.h      |  3 +--
>  5 files changed, 33 insertions(+), 13 deletions(-)
>
> --
> 2.25.1
>

Applied all.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs