All of lore.kernel.org
 help / color / mirror / Atom feed
From: Xavier Hsu <xavier.hsu@linaro.org>
To: Lars-Peter Clausen <lars@metafoo.de>,
	Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: Andy Green <andy.green@linaro.org>,
	alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
	Patch Tracking <patches@linaro.org>
Subject: Re: [PATCHv3 7/9] WM8971 improves the function of regmap
Date: Thu, 11 Sep 2014 11:21:34 +0800	[thread overview]
Message-ID: <CAHa2TOYKfTqZZ-ejpNT=5ga5uOASCOZnKbnWUCXB33QPCA+MSA@mail.gmail.com> (raw)
In-Reply-To: <540769BA.8010606@metafoo.de>

Hi Charles and Lars-Peter:
Thanks for your feedback.
I will modify our patch as below.
1. Using (codec->control_data = wm8971->regmap;) or (wm8971_get_regmap) to
register regmap.
2. Modifying our patch the content of commit.

Thanks again.

BR,
Xavier

2014-09-04 3:19 GMT+08:00 Lars-Peter Clausen <lars@metafoo.de>:

> On 09/02/2014 05:27 AM, Xavier Hsu wrote:
>
>> This patch improves WM8971.
>> We modify the function of regmap.
>>
>> Any comments about improving the patch are welcome.
>> Thanks.
>>
>> Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
>> Signed-off-by: Andy Green <andy.green@linaro.org>
>> ---
>>   sound/soc/codecs/wm8971.c |   26 +++++++++++++++++++++-----
>>   1 file changed, 21 insertions(+), 5 deletions(-)
>>
>> diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
>> index 68b4f52..95e7c39 100755
>> --- a/sound/soc/codecs/wm8971.c
>> +++ b/sound/soc/codecs/wm8971.c
>> @@ -38,6 +38,7 @@
>>
>>   /* codec private data */
>>   struct wm8971_priv {
>> +       struct regmap *regmap;
>>         unsigned int sysclk;
>>         struct snd_pcm_hw_constraint_list *sysclk_constraints;
>>         int playback_fs;
>> @@ -716,6 +717,7 @@ static int wm8971_mute(struct snd_soc_dai *dai, int
>> mute)
>>   static int wm8971_set_bias_level(struct snd_soc_codec *codec,
>>                                  enum snd_soc_bias_level level)
>>   {
>> +       struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
>>         u16 pwr_reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
>>
>>         switch (level) {
>> @@ -727,7 +729,7 @@ static int wm8971_set_bias_level(struct snd_soc_codec
>> *codec,
>>                 break;
>>         case SND_SOC_BIAS_STANDBY:
>>                 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
>> -                       snd_soc_cache_sync(codec);
>> +                       regcache_sync(wm8971->regmap);
>>
>
> This is a bugfix and it should be noted in the commit message, what is
> broken, why it is broken and since when it has been broken.
>
>
>>                 /* mute dac and set vmid to 500k, enable VREF */
>>                 snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x0140);
>> @@ -774,7 +776,11 @@ static struct snd_soc_dai_driver wm8971_dai = {
>>
>>   static int wm8971_suspend(struct snd_soc_codec *codec)
>>   {
>> +       struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
>> +
>>         wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
>> +       regcache_mark_dirty(wm8971->regmap);
>>
>
> The core already marks the regcache dirty after calling the suspend
> callback, no need to do this from hand.
>
>  +
>>         return 0;
>>   }
>>
>> @@ -797,9 +803,12 @@ static int wm8971_resume(struct snd_soc_codec *codec)
>>
>>   static int wm8971_probe(struct snd_soc_codec *codec)
>>   {
>> +       struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
>>         int ret = 0;
>>         u16 reg;
>>
>> +       codec->control_data = wm8971->regmap;
>> +
>>         wm8971_reset(codec);
>>
>>         /* charge output caps - set vmid to 5k for quick power up */
>> @@ -830,12 +839,20 @@ static int wm8971_remove(struct snd_soc_codec
>> *codec)
>>         return 0;
>>   }
>>
>> +struct regmap *wm8971_get_regmap(struct device *dev)
>> +{
>> +       struct wm8971_priv *priv = dev_get_drvdata(dev);
>> +
>> +       return priv->regmap;
>> +}
>>
>
> This is unnecessary, since the regmap has been registered with the device
> of the CODEC the core is able to figure out the correct regmap itself.
>
> [...]
>

  reply	other threads:[~2014-09-11  3:21 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-02  3:27 [PATCHv3 1/9] Clean WM8971 through checkpatch Xavier Hsu
2014-09-02  3:27 ` [PATCHv3 2/9] WM8971 uses SOC_ENUM_SINGLE_DECL to replace SOC_ENUM_SINGLE Xavier Hsu
2014-09-02  9:33   ` Charles Keepax
2014-09-02 14:56   ` Lars-Peter Clausen
2014-09-04  3:53     ` Xavier Hsu
2014-09-02  3:27 ` [PATCHv3 3/9] WM8971 uses TLV information Xavier Hsu
2014-09-02  9:47   ` Charles Keepax
2014-09-02  3:27 ` [PATCHv3 4/9] Improve wm8971_set_dai_fmt Xavier Hsu
2014-09-02  9:48   ` Charles Keepax
2014-09-02  3:27 ` [PATCHv3 5/9] Using the constraint based on wm8971_set_dai_sysclk Xavier Hsu
2014-09-02  9:28   ` Charles Keepax
2014-09-04  9:13     ` [alsa-devel] " Xavier Hsu
2014-09-02  3:27 ` [PATCHv3 6/9] WM8971 uses msleep to replace work queue Xavier Hsu
2014-09-02 10:00   ` Charles Keepax
2014-09-05  3:09     ` Xavier Hsu
2014-09-02  3:27 ` [PATCHv3 7/9] WM8971 improves the function of regmap Xavier Hsu
2014-09-02 11:03   ` Charles Keepax
2014-09-03 19:19   ` Lars-Peter Clausen
2014-09-11  3:21     ` Xavier Hsu [this message]
2014-09-11  7:06       ` Lars-Peter Clausen
2014-09-02  3:27 ` [PATCHv3 8/9] WM8971 adds kcontrol functions Xavier Hsu
2014-09-02 12:41   ` Charles Keepax
2014-09-11  3:35     ` Xavier Hsu
2014-09-02  3:27 ` [PATCHv3 9/9] ASOC add WM8973 support to WM8971 Xavier Hsu
2014-09-02 12:38   ` Charles Keepax
2014-09-02  3:30 [PATCHv3 1/9] Clean WM8971 through checkpatch Xavier Hsu
2014-09-02  3:30 ` [PATCHv3 7/9] WM8971 improves the function of regmap Xavier Hsu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHa2TOYKfTqZZ-ejpNT=5ga5uOASCOZnKbnWUCXB33QPCA+MSA@mail.gmail.com' \
    --to=xavier.hsu@linaro.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=andy.green@linaro.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=lars@metafoo.de \
    --cc=patches@linaro.org \
    --cc=patches@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.