From: Nishant Verma <vnish11@gmail.com>
To: Truring Team <truring12@gmail.com>
Cc: dev@dpdk.org, USERS <users@dpdk.org>
Subject: Re: [dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000
Date: Wed, 26 May 2021 00:35:37 -0400 [thread overview]
Message-ID: <CAHhCjUGajOnCUubY68MWpY+zevXBaCeBXad+9g5rnhH7kdA9JQ@mail.gmail.com> (raw)
In-Reply-To: <CALvshjMQDGFS8sWuHQOJvdd0ppy-+PhkvnzhH_WcyqOQu9BNdA@mail.gmail.com>
meminfo states: Hugepagesize: 1048576 kB
But in your initial mail you state Hugepage size is 1G.
have you configured HugePage via grub.... ?
Thanks.
Regards,
NV
On Wed, May 26, 2021 at 12:21 AM Truring Team <truring12@gmail.com> wrote:
> Hi Nishant,
>
> cat /proc/meminfo
> 11:59:29.200 §MemTotal: 23101672 kB
> 11:59:29.200 §MemFree: 15254764 kB
> 11:59:29.200 §MemAvailable: 19243184 kB
> 11:59:29.200 §Buffers: 6792 kB
> 11:59:29.201 §Cached: 4084844 kB
> 11:59:29.201 §SwapCached: 0 kB
> 11:59:29.201 §Active: 3609016 kB
> 11:59:29.201 §Inactive: 1175160 kB
> 11:59:29.201 §Active(anon): 695644 kB
> 11:59:29.202 §Inactive(anon): 19716 kB
> 11:59:29.202 §Active(file): 2913372 kB
> 11:59:29.202 §Inactive(file): 1155444 kB
> 11:59:29.202 §Unevictable: 0 kB
> 11:59:29.202 §Mlocked: 0 kB
> 11:59:29.203 §SwapTotal: 11665404 kB
> 11:59:29.204 §SwapFree: 11665404 kB
> 11:59:29.204 §Dirty: 32 kB
> 11:59:29.204 §Writeback: 0 kB
> 11:59:29.204 §AnonPages: 694764 kB
> 11:59:29.205 §Mapped: 140220 kB
> 11:59:29.205 §Shmem: 22800 kB
> 11:59:29.205 §Slab: 445016 kB
> 11:59:29.205 §SReclaimable: 289968 kB
> 11:59:29.205 §SUnreclaim: 155048 kB
> 11:59:29.206 §KernelStack: 16624 kB
> 11:59:29.206 §PageTables: 35892 kB
> 11:59:29.206 §NFS_Unstable: 0 kB
> 11:59:29.206 §Bounce: 0 kB
> 11:59:29.206 §WritebackTmp: 0 kB
> 11:59:29.207 §CommitLimit: 22167664 kB
> 11:59:29.207 §Committed_AS: 4342668 kB
> 11:59:29.207 §VmallocTotal: 34359738367 kB
> 11:59:29.207 §VmallocUsed: 463188 kB
> 11:59:29.207 §VmallocChunk: 34358835196 kB
> 11:59:29.208 §HardwareCorrupted: 0 kB
> 11:59:29.208 §AnonHugePages: 329728 kB
> 11:59:29.208 §CmaTotal: 0 kB
> 11:59:29.209 §CmaFree: 0 kB
> 11:59:29.209 §HugePages_Total: 1024
> 11:59:29.209 §HugePages_Free: 1019
> 11:59:29.209 §HugePages_Rsvd: 0
> 11:59:29.209 §HugePages_Surp: 0
> 11:59:29.209 §Hugepagesize: 2048 kB
> 11:59:29.209 §DirectMap4k: 381760 kB
> 11:59:29.209 §DirectMap2M: 13973504 kB
> 11:59:29.215 §DirectMap1G: 11534336 kB
>
> Regards
>
>
> On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> wrote:
>
>> Can you paste output of /proc/meminfo ?
>>
>>
>>
>> Regards,
>> NV
>>
>> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> wrote:
>>
>>> Hi Team,
>>>
>>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK
>>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
>>> Controller but facing following issues:
>>>
>>> If someone can look into the following logs and help me figure out the
>>> issue?
>>>
>>>
>>>
>>> 1. DPDK 20.11 ( Using 1 GB hugepages)
>>>
>>> gdb ./dpdk-testpmd
>>>
>>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7
>>>
>>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.
>>>
>>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
>>> http://gnu.org/licenses/gpl.html
>>>
>>> 12:45:59.349 §This is free software: you are free to change and
>>> redistribute it.
>>>
>>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law. Type
>>> "show copying"
>>>
>>> 12:45:59.349 §and "show warranty" for details.
>>>
>>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".
>>>
>>> 12:45:59.351 §For bug reporting instructions, please see:
>>>
>>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/...
>>>
>>> 12:45:59.415 §Reading symbols from
>>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols
>>> found)...done.
>>>
>>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i
>>>
>>> 12:46:11.493 §Starting program:
>>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i
>>>
>>> 12:46:11.717 §[Thread debugging using libthread_db enabled]
>>>
>>> 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1".
>>>
>>> 12:46:11.768 §EAL: Detected 6 lcore(s)
>>>
>>> 12:46:11.769 §EAL: Detected 1 NUMA nodes
>>>
>>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]
>>>
>>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>>
>>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]
>>>
>>> 12:46:11.792 §EAL: Selected IOVA mode 'PA'
>>>
>>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
>>>
>>> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB
>>>
>>> 12:46:11.854 §EAL: Probing VFIO support...
>>>
>>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]
>>>
>>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]
>>>
>>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]
>>>
>>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]
>>>
>>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]
>>>
>>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>>> 0000:65:00.0 (socket 0)
>>>
>>> 12:46:11.915 §
>>>
>>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.
>>>
>>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>>
>>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
>>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
>>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
>>> zlib-1.2.7-19.el7_9.x86_64
>>>
>>> 12:46:14.542 §(gdb) bt
>>>
>>> 12:46:14.548 §#0 0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>>
>>> 12:46:14.548 §#1 0x0000000000eb811e in ecore_hw_init ()
>>>
>>> 12:46:14.549 §#2 0x0000000000ef7397 in qed_slowpath_start ()
>>>
>>> 12:46:14.549 §#3 0x0000000000ef0483 in qede_common_dev_init ()
>>>
>>> 12:46:14.549 §#4 0x0000000000ef1113 in qede_eth_dev_pci_probe ()
>>>
>>> 12:46:14.549 §#5 0x0000000000a4450b in pci_probe ()
>>>
>>> 12:46:14.550 §#6 0x00000000009dbc6c in rte_bus_probe ()
>>>
>>> 12:46:14.550 §#7 0x00000000009fa91c in rte_eal_init ()
>>>
>>> 12:46:14.617 §#8 0x0000000000425db1 in main ()
>>>
>>> 12:46:17.052 §(gdb) quit
>>>
>>> 12:46:17.056 §A debugging session is active.
>>>
>>> 12:46:17.056 §
>>>
>>> 12:46:17.057 § Inferior 1 [process 23180] will be killed.
>>>
>>>
>>>
>>>
>>>
>>> 2. *DPDK 21.05:*
>>>
>>> ./dpdk-testpmd -l 0-5 -n4 -- -i
>>>
>>> 12:46:46.257 §EAL: Detected 6 lcore(s)
>>>
>>> 12:46:46.257 §EAL: Detected 1 NUMA nodes
>>>
>>> 12:46:46.258 §EAL: Detected static linkage of DPDK
>>>
>>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>>
>>> 12:46:46.285 §EAL: Selected IOVA mode 'PA'
>>>
>>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0
>>>
>>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported
>>>
>>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>>> 0000:65:00.0 (socket 0)
>>>
>>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP
>>> scratch-pad is not configured
>>>
>>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized
>>>
>>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not
>>> initialized!
>>>
>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not
>>> initialized
>>>
>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW
>>> information
>>>
>>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
>>>
>>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe
>>> failed rc -3
>>>
>>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used
>>>
>>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created
>>>
>>> 12:46:46.423 §testpmd: No probed ethernet devices
>>>
>>> 12:46:46.461 §Interactive-mode selected
>>>
>>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456,
>>> size=2176, socket=0
>>>
>>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc
>>>
>>> 12:46:46.540 §Done
>>>
>>>
>>>
>>>
>>>
>>> System Information:
>>>
>>> *ethtool -i p2p1*
>>> driver: qede
>>> version: 8.33.0.20
>>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
>>> expansion-rom-version:
>>> bus-info: 0000:65:00.0
>>> supports-statistics: yes
>>> supports-test: yes
>>> supports-eeprom-access: no
>>> supports-register-dump: yes
>>> supports-priv-flags: yes
>>>
>>>
>>>
>>> *ethtool -i p2p2 *driver: qede
>>> version: 8.33.0.20
>>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0
>>> expansion-rom-version:
>>> bus-info: 0000:65:00.1
>>> supports-statistics: yes
>>> supports-test: yes
>>> supports-eeprom-access: no
>>> supports-register-dump: yes
>>> supports-priv-flags: yes
>>>
>>>
>>>
>>>
>>>
>>> *lspci -nn | grep Ether*
>>>
>>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>>
>>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>>
>>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ
>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>>
>>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ
>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>>
>>>
>>>
>>> cd /lib/firmware/qed/
>>>
>>> ls
>>>
>>> 12:48:27.269 §qed_init_values-8.10.9.0.bin
>>> qed_init_values-8.30.12.0.bin qed_init_values_zipped-8.10.5.0.bin
>>> qed_init_values_zipped-8.33.11.0.bin qed_init_values_zipped-8.7.3.0.bin
>>>
>>> 12:48:27.272 §qed_init_values-8.14.6.0.bin
>>> qed_init_values-8.33.12.0.bin qed_init_values_zipped-8.15.3.0.bin
>>> qed_init_values_zipped-8.37.2.0.bin
>>>
>>> 12:48:27.273 §qed_init_values-8.18.9.0.bin
>>> qed_init_values-8.40.33.0.bin qed_init_values_zipped-8.20.0.0.bin
>>> qed_init_values_zipped-8.37.7.0.bin
>>>
>>> 12:48:27.275 §qed_init_values-8.20.0.0.bin
>>> qed_init_values_zipped-8.10.10.0.bin qed_init_values_zipped-8.33.1.0.bin
>>> qed_init_values_zipped-8.4.2.0.bin
>>>
>>>
>>> Best Regards
>>>
>>> Puneet
>>>
>>
next prev parent reply other threads:[~2021-05-26 4:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-26 1:51 [dpdk-dev] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 Truring Team
2021-05-26 4:13 ` [dpdk-dev] [dpdk-users] " Nishant Verma
2021-05-26 4:20 ` Truring Team
2021-05-26 4:35 ` Nishant Verma [this message]
2021-05-26 4:41 ` Truring Team
2021-05-26 9:57 ` Varghese, Vipin
2021-06-01 13:00 ` [dpdk-dev] [EXT] " Igor Russkikh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHhCjUGajOnCUubY68MWpY+zevXBaCeBXad+9g5rnhH7kdA9JQ@mail.gmail.com \
--to=vnish11@gmail.com \
--cc=dev@dpdk.org \
--cc=truring12@gmail.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.