From: Yi Zhang <yi.zhang@redhat.com>
To: linux-block <linux-block@vger.kernel.org>
Subject: kernel NULL pointer triggered with blktests block/025 on latest linux-block/for-next
Date: Wed, 13 Oct 2021 16:50:13 +0800 [thread overview]
Message-ID: <CAHj4cs8poXTLdC+j6u7zypLKR7RpAaG-vxK4dWDz6bCMfPOjsQ@mail.gmail.com> (raw)
Hello
The below NULL pointer issue was triggered on the latest
linux-block/for-next with blktests, is it one known issue?
[ 536.985788] run blktests block/025 at 2021-10-13 04:26:03
[ 537.196048] scsi_debug:sdebug_driver_probe: scsi_debug: trim
poll_queues to 0. poll_q/nr_hw = (0/1)
[ 537.206830] sd 11:0:0:0: Power-on or device reset occurred
[ 550.149333] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ 550.157111] #PF: supervisor read access in kernel mode
[ 550.162843] #PF: error_code(0x0000) - not-present page
[ 550.168576] PGD 0 P4D 0
[ 550.171403] Oops: 0000 [#1] SMP PTI
[ 550.175294] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G S
5.15.0-rc5+ #1
[ 550.183938] Hardware name: Dell Inc. PowerEdge R730xd/ɲ�Pow, BIOS
2.13.0 05/14/2021
[ 550.192578] RIP: 0010:wb_timer_fn+0x37/0x320
[ 550.197351] Code: 48 8b 5f 60 4c 8b 67 50 8b ab 98 00 00 00 8b 93
b8 00 00 00 8b 83 d8 00 00 00 4c 8b 6b 28 01 d5 01 c5 48 8b 43 60 48
8b 40 78 <4c> 8b b0 98 00 00 00 4d 85 ed 0f 84 c0 00 00 00 48 83 7b 30
00 0f
[ 550.218308] RSP: 0018:ffffb52981c34e80 EFLAGS: 00010246
[ 550.224139] RAX: 0000000000000000 RBX: ffff9650c7a59700 RCX: 000000000000000c
[ 550.232103] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff965111a72500
[ 550.240064] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 550.248027] R10: 000000000000000b R11: 0000000000000030 R12: ffff964f44c3c1e0
[ 550.255991] R13: 0000000000000000 R14: ffff965111a72510 R15: ffff9652b7cd7f70
[ 550.263954] FS: 0000000000000000(0000) GS:ffff9652b7cc0000(0000)
knlGS:0000000000000000
[ 550.272985] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 550.279396] CR2: 0000000000000098 CR3: 000000040a610003 CR4: 00000000001706e0
[ 550.287360] Call Trace:
[ 550.290087] <IRQ>
[ 550.292675] ? blk_stat_free_callback_rcu+0x30/0x30
[ 550.298120] call_timer_fn+0x26/0xf0
[ 550.302114] run_timer_softirq+0x1c7/0x3d0
[ 550.306678] ? update_process_times+0xb0/0xc0
[ 550.311541] ? tick_sched_handle.isra.24+0x1f/0x60
[ 550.316890] ? timerqueue_add+0x6f/0x80
[ 550.321170] ? enqueue_hrtimer+0x2f/0x70
[ 550.325548] ? recalibrate_cpu_khz+0x10/0x10
[ 550.330316] ? ktime_get+0x3e/0xa0
[ 550.334108] ? setup_local_APIC+0x350/0x350
[ 550.338779] __do_softirq+0xc9/0x285
[ 550.342762] irq_exit_rcu+0xa6/0xc0
[ 550.346657] sysvec_apic_timer_interrupt+0x6e/0x90
[ 550.352006] </IRQ>
[ 550.354345] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 550.360081] RIP: 0010:cpuidle_enter_state+0xd6/0x350
[ 550.365626] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 95 5b 98 ff 45
84 ff 74 12 9c 58 f6 c4 02 0f 85 32 02 00 00 31 ff e8 6e fb 9e ff fb
45 85 f6 <0f> 88 e0 00 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04
82 49
[ 550.386582] RSP: 0018:ffffb52980187e80 EFLAGS: 00000202
[ 550.392411] RAX: ffff9652b7ce7c00 RBX: 0000000000000004 RCX: 000000000000001f
[ 550.400374] RDX: 0000008017745c51 RSI: 000000005000068d RDI: 0000000000000000
[ 550.408337] RBP: ffffd5297fcc0308 R08: 0000000000000002 R09: 0000000000027440
[ 550.416300] R10: 00000beeb045c510 R11: ffff9652b7ce6944 R12: 0000008017745c51
[ 550.424264] R13: ffffffffb3acac00 R14: 0000000000000004 R15: 0000000000000000
[ 550.432228] cpuidle_enter+0x29/0x40
[ 550.436210] do_idle+0x257/0x2a0
[ 550.439814] cpu_startup_entry+0x19/0x20
[ 550.444192] start_secondary+0x116/0x150
[ 550.448570] secondary_startup_64_no_verify+0xc2/0xcb
[ 550.454212] Modules linked in: scsi_debug(-) rpcsec_gss_krb5
auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill
sunrpc vfat fat dm_multipath intel_rapl_msr intel_rapl_common sb_edac
x86_pkg_temp_thermal intel_powerclamp coretemp mgag200 kvm_intel kvm
iTCO_wdt i2c_algo_bit irqbypass iTCO_vendor_support drm_kms_helper
crct10dif_pclmul crc32_pclmul pcspkr ghash_clmulni_intel syscopyarea
sysfillrect sysimgblt fb_sys_fops cdc_ether rapl intel_cstate usbnet
mei_me drm intel_uncore mii lpc_ich mxm_wmi mei ipmi_ssif ipmi_si
ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c
sd_mod sg nvme ahci nvme_core libahci crc32c_intel libata t10_pi tg3
megaraid_sas wmi dm_mirror dm_region_hash dm_log dm_mod [last
unloaded: scsi_debug]
[ 550.528470] CR2: 0000000000000098
[ 550.532168] ---[ end trace e450dd0876b8ec06 ]---
[ 550.605860] RIP: 0010:wb_timer_fn+0x37/0x320
[ 550.610630] Code: 48 8b 5f 60 4c 8b 67 50 8b ab 98 00 00 00 8b 93
b8 00 00 00 8b 83 d8 00 00 00 4c 8b 6b 28 01 d5 01 c5 48 8b 43 60 48
8b 40 78 <4c> 8b b0 98 00 00 00 4d 85 ed 0f 84 c0 00 00 00 48 83 7b 30
00 0f
[ 550.631586] RSP: 0018:ffffb52981c34e80 EFLAGS: 00010246
[ 550.637416] RAX: 0000000000000000 RBX: ffff9650c7a59700 RCX: 000000000000000c
[ 550.645379] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff965111a72500
[ 550.653341] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 550.661303] R10: 000000000000000b R11: 0000000000000030 R12: ffff964f44c3c1e0
[ 550.669265] R13: 0000000000000000 R14: ffff965111a72510 R15: ffff9652b7cd7f70
[ 550.677227] FS: 0000000000000000(0000) GS:ffff9652b7cc0000(0000)
knlGS:0000000000000000
[ 550.686257] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 550.692669] CR2: 0000000000000098 CR3: 000000040a610003 CR4: 00000000001706e0
[ 550.700633] Kernel panic - not syncing: Fatal exception in interrupt
[ 550.829274] Kernel Offset: 0x31000000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 550.911183] ---[ end Kernel panic - not syncing: Fatal exception in
interrupt ]---
--
Best Regards,
Yi Zhang
next reply other threads:[~2021-10-13 8:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-13 8:50 Yi Zhang [this message]
2021-10-13 9:09 ` kernel NULL pointer triggered with blktests block/025 on latest linux-block/for-next Christoph Hellwig
2021-10-14 1:36 ` Yi Zhang
2021-10-14 6:10 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHj4cs8poXTLdC+j6u7zypLKR7RpAaG-vxK4dWDz6bCMfPOjsQ@mail.gmail.com \
--to=yi.zhang@redhat.com \
--cc=linux-block@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.