* [PATCH blktests] tests/srp: fix module loading issue during srp tests
@ 2021-10-14 9:04 Yi Zhang
2021-10-15 3:30 ` Bart Van Assche
0 siblings, 1 reply; 3+ messages in thread
From: Yi Zhang @ 2021-10-14 9:04 UTC (permalink / raw)
To: osandov, bvanassche; +Cc: linux-block
The ib_isert/ib_srpt modules will be automatically loaded after the first
time rdma_rxe/siw setup, which will lead srp tests fail.
$ modprobe rdma_rxe
$ echo eno1 >/sys/module/rdma_rxe/parameters/add
$ lsmod | grep -E "ib_srpt|iscsi_target_mod|ib_isert"
ib_srpt 167936 0
ib_isert 139264 0
iscsi_target_mod 843776 1 ib_isert
target_core_mod 1069056 3 iscsi_target_mod,ib_srpt,ib_isert
rdma_cm 315392 5 rpcrdma,ib_srpt,ib_iser,ib_isert,rdma_ucm
ib_cm 344064 2 rdma_cm,ib_srpt
ib_core 1101824 10 rdma_cm,rdma_rxe,rpcrdma,ib_srpt,iw_cm,ib_iser,ib_isert,rdma_ucm,ib_uverbs,ib_cm
$ ./check srp/001
srp/001 (Create and remove LUNs) [failed]
runtime ... 3.675s
--- tests/srp/001.out 2021-10-13 01:18:50.846740093 -0400
+++ /root/blktests/results/nodev/srp/001.out.bad 2021-10-14 03:24:18.593852208 -0400
@@ -1,3 +1 @@
-Configured SRP target driver
-count_luns(): 3 <> 3
-Passed
+insmod: ERROR: could not insert module /lib/modules/5.15.0-rc5.fix+/kernel/drivers/infiniband/ulp/srpt/ib_srpt.ko: File exists
modprobe: FATAL: Module iscsi_target_mod is in use.
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
---
tests/srp/rc | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tests/srp/rc b/tests/srp/rc
index 586f007..f89948b 100755
--- a/tests/srp/rc
+++ b/tests/srp/rc
@@ -494,6 +494,7 @@ start_lio_srpt() {
if modinfo ib_srpt | grep -q '^parm:[[:blank:]]*rdma_cm_port:'; then
opts+=("rdma_cm_port=${srp_rdma_cm_port}")
fi
+ unload_module ib_srpt && \
insmod "/lib/modules/$(uname -r)/kernel/drivers/infiniband/ulp/srpt/ib_srpt."* "${opts[@]}" || return $?
i=0
for r in "${vdev_path[@]}"; do
@@ -551,7 +552,7 @@ stop_lio_srpt() {
rmdir /sys/kernel/config/target/*/* >&/dev/null
rmdir /sys/kernel/config/target/* >&/dev/null
- for m in ib_srpt iscsi_target_mod target_core_pscsi target_core_iblock \
+ for m in ib_srpt ib_isert iscsi_target_mod target_core_pscsi target_core_iblock \
target_core_file target_core_stgt target_core_user \
target_core_mod
do
--
2.21.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH blktests] tests/srp: fix module loading issue during srp tests
2021-10-14 9:04 [PATCH blktests] tests/srp: fix module loading issue during srp tests Yi Zhang
@ 2021-10-15 3:30 ` Bart Van Assche
2021-10-18 2:43 ` Yi Zhang
0 siblings, 1 reply; 3+ messages in thread
From: Bart Van Assche @ 2021-10-15 3:30 UTC (permalink / raw)
To: Yi Zhang, osandov; +Cc: linux-block
On 10/14/21 02:04, Yi Zhang wrote:
> diff --git a/tests/srp/rc b/tests/srp/rc
> index 586f007..f89948b 100755
> --- a/tests/srp/rc
> +++ b/tests/srp/rc
> @@ -494,6 +494,7 @@ start_lio_srpt() {
> if modinfo ib_srpt | grep -q '^parm:[[:blank:]]*rdma_cm_port:'; then
> opts+=("rdma_cm_port=${srp_rdma_cm_port}")
> fi
> + unload_module ib_srpt && \
> insmod "/lib/modules/$(uname -r)/kernel/drivers/infiniband/ulp/srpt/ib_srpt."* "${opts[@]}" || return $?
A nit: the backslash after && can be removed.
Otherwise this patch looks fine to me.
Thanks,
Bart.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH blktests] tests/srp: fix module loading issue during srp tests
2021-10-15 3:30 ` Bart Van Assche
@ 2021-10-18 2:43 ` Yi Zhang
0 siblings, 0 replies; 3+ messages in thread
From: Yi Zhang @ 2021-10-18 2:43 UTC (permalink / raw)
To: Bart Van Assche; +Cc: Omar Sandoval, linux-block
On Fri, Oct 15, 2021 at 11:30 AM Bart Van Assche <bvanassche@acm.org> wrote:
>
> On 10/14/21 02:04, Yi Zhang wrote:
> > diff --git a/tests/srp/rc b/tests/srp/rc
> > index 586f007..f89948b 100755
> > --- a/tests/srp/rc
> > +++ b/tests/srp/rc
> > @@ -494,6 +494,7 @@ start_lio_srpt() {
> > if modinfo ib_srpt | grep -q '^parm:[[:blank:]]*rdma_cm_port:'; then
> > opts+=("rdma_cm_port=${srp_rdma_cm_port}")
> > fi
> > + unload_module ib_srpt && \
> > insmod "/lib/modules/$(uname -r)/kernel/drivers/infiniband/ulp/srpt/ib_srpt."* "${opts[@]}" || return $?
>
> A nit: the backslash after && can be removed.
>
Thanks Bart, I've sent V2 to fix it.
> Otherwise this patch looks fine to me.
>
> Thanks,
>
> Bart.
>
--
Best Regards,
Yi Zhang
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-10-18 2:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-14 9:04 [PATCH blktests] tests/srp: fix module loading issue during srp tests Yi Zhang
2021-10-15 3:30 ` Bart Van Assche
2021-10-18 2:43 ` Yi Zhang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.