All of lore.kernel.org
 help / color / mirror / Atom feed
From: prabhu <d.praabhu@gmail.com>
To: linux-wireless@vger.kernel.org, b43-dev@lists.infradead.org
Subject: [Regression]BCM4312 is broken in kernel 4.18[Root cause found]
Date: Thu, 23 Aug 2018 23:00:53 +0530	[thread overview]
Message-ID: <CAHnrWRruLuuPN+bYc4NqO515W8+wHoCPH16ULsnJV_JrD+9oEw@mail.gmail.com> (raw)

Hi,

BCM 4312 wifi card stopped working from kernel version 4.18
After boot up it tries to reconnect for few times and after that it
disconnected completely.

Here is the snippet from dmesg:
[ 70.826051] [drm:radeon_cs_parser_relocs [radeon]] *ERROR* gem object
lookup failed 0xd
[ 70.826090] [drm:radeon_cs_ioctl [radeon]] *ERROR* Failed to parse
relocation -2!
[ 238.066341] b43-phy0: Controller RESET (Out of order TX) ...
[ 238.306116] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 245.443095] b43-phy0: Controller restarted
[ 285.552662] wlan0: deauthenticated from 98:de:d0:4b:e6:f6 (Reason:
6=CLASS2_FRAME_FROM_NONAUTH_STA)
[ 285.639719] wlan0: authenticate with 98:de:d0:4b:e6:f6
[ 285.656291] wlan0: send auth to 98:de:d0:4b:e6:f6 (try 1/3)
[ 285.658957] wlan0: authenticated
[ 285.662386] wlan0: associate with 98:de:d0:4b:e6:f6 (try 1/3)
[ 285.665581] wlan0: RX AssocResp from 98:de:d0:4b:e6:f6 (capab=0x431
status=0 aid=2)
[ 285.666396] wlan0: associated
[ 309.348063] b43-phy0: Controller RESET (Out of order TX) ...
[ 309.592485] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 316.742829] b43-phy0: Controller restarted
[ 329.268570] perf: interrupt took too long (2513 > 2500), lowering
kernel.perf_event_max_sample_rate to 79500
[ 400.542426] wlan0: deauthenticated from 98:de:d0:4b:e6:f6 (Reason:
6=CLASS2_FRAME_FROM_NONAUTH_STA)
[ 400.636523] wlan0: authenticate with 98:de:d0:4b:e6:f6
[ 400.652666] wlan0: send auth to 98:de:d0:4b:e6:f6 (try 1/3)
[ 400.655070] wlan0: authenticated
[ 400.655447] wlan0: associate with 98:de:d0:4b:e6:f6 (try 1/3)
[ 400.658583] wlan0: RX AssocResp from 98:de:d0:4b:e6:f6 (capab=0x431
status=0 aid=2)
[ 400.659276] wlan0: associated
[ 412.256359] perf: interrupt took too long (3246 > 3141), lowering
kernel.perf_event_max_sample_rate to 61500
[ 555.832079] b43-phy0: Controller RESET (Out of order TX) ...
[ 556.082050] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 563.172269] b43-phy0: Controller restarted
[ 619.628212] perf: interrupt took too long (4066 > 4057), lowering
kernel.perf_event_max_sample_rate to 48900
[ 766.268349] wlan0: deauthenticated from 98:de:d0:4b:e6:f6 (Reason:
6=CLASS2_FRAME_FROM_NONAUTH_STA)
[ 766.317708] wlan0: authenticate with 98:de:d0:4b:e6:f6
[ 766.338515] wlan0: send auth to 98:de:d0:4b:e6:f6 (try 1/3)
[ 766.345731] wlan0: authenticated
[ 766.347959] wlan0: associate with 98:de:d0:4b:e6:f6 (try 1/3)
[ 766.352674] wlan0: RX AssocResp from 98:de:d0:4b:e6:f6 (capab=0x431
status=0 aid=2)
[ 766.353351] wlan0: associated
[ 801.234010] perf: interrupt took too long (5097 > 5082), lowering
kernel.perf_event_max_sample_rate to 39000
[ 1780.122837] perf: interrupt took too long (6979 > 6371), lowering
kernel.perf_event_max_sample_rate to 28500
[ 2347.465072] b43-phy0: Controller RESET (Out of order TX) ...
[ 2347.705572] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 2354.735641] b43-phy0: Controller restarted
[ 2388.784785] wlan0: deauthenticated from 98:de:d0:4b:e6:f6 (Reason:
6=CLASS2_FRAME_FROM_NONAUTH_STA)
[ 2388.901388] wlan0: authenticate with 98:de:d0:4b:e6:f6
[ 2388.918575] wlan0: send auth to 98:de:d0:4b:e6:f6 (try 1/3)
[ 2388.920893] wlan0: authenticated
[ 2388.921243] wlan0: associate with 98:de:d0:4b:e6:f6 (try 1/3)
[ 2388.924310] wlan0: RX AssocResp from 98:de:d0:4b:e6:f6 (capab=0x431
status=0 aid=2)
[ 2388.925336] wlan0: associated
[ 2973.297286] b43-phy0: Controller RESET (Out of order TX) ...
[ 2973.532792] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 2980.496495] b43-phy0: Controller restarted
[ 5306.648339] wlan0: deauthenticating from 98:de:d0:4b:e6:f6 by local
choice (Reason: 3=DEAUTH_LEAVING)
[ 5306.909377] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 5313.899248] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5320.225907] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 5327.189103] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5328.567334] wlan0: authenticate with 98:de:d0:4b:e6:f6
[ 5328.599382] wlan0: send auth to 98:de:d0:4b:e6:f6 (try 1/3)
[ 5328.601751] wlan0: authenticated
[ 5328.602238] wlan0: associate with 98:de:d0:4b:e6:f6 (try 1/3)
[ 5328.605468] wlan0: RX AssocResp from 98:de:d0:4b:e6:f6 (capab=0x431
status=0 aid=2)
[ 5328.606369] wlan0: associated
[ 5328.615757] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5348.732714] b43-phy0: Controller RESET (Out of order TX) ...

The following commits introduce this regression in 4.18
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=66cffd6daab76caebab26eb803b92182414fc182

I verified that in two ways:
1. Downgrade the kernel to 4.17.14 - Fixes the Issue
2. Revert that commit in 4.18.4 - Fixes the Issue

Regards,
D.Prabhu

             reply	other threads:[~2018-08-23 21:01 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-23 17:30 prabhu [this message]
2018-08-23 18:11 ` [Regression]BCM4312 is broken in kernel 4.18[Root cause found] Michael Büsch
2018-08-24  8:23   ` Kalle Valo
2018-08-24 16:15     ` Larry Finger
2018-08-26  7:23       ` prabhu
2018-08-26 16:14         ` Larry Finger
2018-08-27 11:30           ` prabhu
2018-08-27 15:28             ` Larry Finger
     [not found]               ` <CAHnrWRpPzV5BK3BoMrQ1vH=nxu70dVONLdhCnHh0SpBEa2v5LQ@mail.gmail.com>
2018-09-04 15:15                 ` Larry Finger
2018-08-28 12:41           ` Taketo Kabe
2018-08-23 19:20 ` Larry Finger
2018-08-24  7:54   ` prabhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHnrWRruLuuPN+bYc4NqO515W8+wHoCPH16ULsnJV_JrD+9oEw@mail.gmail.com \
    --to=d.praabhu@gmail.com \
    --cc=b43-dev@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.