From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andy Shevchenko <andy.shevchenko@gmail.com>
Date: Mon, 17 Feb 2020 17:33:59 +0200
Subject: use invd instead of wbinvd in real mode start code
In-Reply-To: <CAHp75VfuzMm=CPJ86GspRiiv+AAYbs+jFDKP2rfNmYhsmvOY+w@mail.gmail.com>
References: <CAHp75VdtevMO=AWeZZ-kfmo0Dx5RrGBZEW8Mm5ubLU2pm3Nh=g@mail.gmail.com>
 <CAK7LNASQuuEWCypyK+TDYa1eYk__KKRZ1Z8JgsEbhd+4KNFNjw@mail.gmail.com>
 <CAHp75Veri=85osuFy0xDukEKN9zAULJpk+1sTdHynTL_deK=0Q@mail.gmail.com>
 <CAHp75VdUY7zJfkc4YV-KTt1aEKg9Ggy6PsJAEOkgo9eCtQx9Kg@mail.gmail.com>
 <20200217150929.95930240036@gemini.denx.de>
 <CAHp75VfuzMm=CPJ86GspRiiv+AAYbs+jFDKP2rfNmYhsmvOY+w@mail.gmail.com>
Message-ID: <CAHp75VdZs2MKnFOYSdyQjqAQQAngmjB5g4C2uJMW=Vo06UE6ZA@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Mon, Feb 17, 2020 at 5:32 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
> On Mon, Feb 17, 2020 at 5:09 PM Wolfgang Denk <wd@denx.de> wrote:
> > In message <CAHp75VdUY7zJfkc4YV-KTt1aEKg9Ggy6PsJAEOkgo9eCtQx9Kg@mail.gmail.com> you wrote:
> > >
> > > > > git bisect is the usual way to figure out the culprit.
> > > >
> > > > Too much work to do this way.
> >
> > If you find bisecting is too much work you probably still do it
> > manually. Why don't you use  tbot  to automize such boring and time
> > consuming tasks?
>
> Bisection time something about 10%, while 90% is flashing the board
> and, given the result, triggering either bad or good next cycle.

And btw, doing git bisect is not mandatory technique to follow as long
as I can guarantee the (reproducible) result, right?

-- 
With Best Regards,
Andy Shevchenko