All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>,
	"supporter:QLOGIC QLA3XXX NE..." <linux-driver@qlogic.com>,
	linux-scsi <linux-scsi@vger.kernel.org>,
	Saurav Kashyap <saurav.kashyap@qlogic.com>,
	Oleksandr Khoshaba <oleksandr.khoshaba@gmail.com>
Subject: Re: [PATCHv2 3/3] scsi: qla4xxx: print MAC and SID via %p[mM][R]
Date: Wed, 18 Mar 2015 10:47:35 +0200	[thread overview]
Message-ID: <CAHp75VejNuP6SkoU7UZrj2q4PZmJkUySSL_HeEd7QaZ+6Adv8g@mail.gmail.com> (raw)
In-Reply-To: <1374743425-13828-4-git-send-email-andriy.shevchenko@linux.intel.com>

On Thu, Jul 25, 2013 at 12:10 PM, Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
> From: Oleksandr Khoshaba <oleksandr.khoshaba@gmail.com>
>
> In the kernel we have nice specifier to print MAC by given pointer to the
> address in binary form.
>
> Signed-off-by: Oleksandr Khoshaba <Oleksandr.Khoshaba@gmail.com>
> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>

Could anyone take this patch?

> ---
>  drivers/scsi/qla4xxx/ql4_mbx.c |  5 +----
>  drivers/scsi/qla4xxx/ql4_nx.c  |  8 ++------
>  drivers/scsi/qla4xxx/ql4_os.c  | 15 ++++-----------
>  3 files changed, 7 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
> index a501bea..f01b8ae 100644
> --- a/drivers/scsi/qla4xxx/ql4_mbx.c
> +++ b/drivers/scsi/qla4xxx/ql4_mbx.c
> @@ -1837,10 +1837,7 @@ int qla4xxx_set_param_ddbentry(struct scsi_qla_host *ha,
>         ptid = (uint16_t *)&fw_ddb_entry->isid[1];
>         *ptid = cpu_to_le16((uint16_t)ddb_entry->sess->target_id);
>
> -       DEBUG2(ql4_printk(KERN_INFO, ha, "ISID [%02x%02x%02x%02x%02x%02x]\n",
> -                         fw_ddb_entry->isid[5], fw_ddb_entry->isid[4],
> -                         fw_ddb_entry->isid[3], fw_ddb_entry->isid[2],
> -                         fw_ddb_entry->isid[1], fw_ddb_entry->isid[0]));
> +       DEBUG2(ql4_printk(KERN_INFO, ha, "ISID [%pmR]\n", fw_ddb_entry->isid));
>
>         iscsi_opts = le16_to_cpu(fw_ddb_entry->iscsi_options);
>         memset(fw_ddb_entry->iscsi_alias, 0, sizeof(fw_ddb_entry->iscsi_alias));
> diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
> index eaf00c1..2bc1046 100644
> --- a/drivers/scsi/qla4xxx/ql4_nx.c
> +++ b/drivers/scsi/qla4xxx/ql4_nx.c
> @@ -3455,12 +3455,8 @@ int qla4_8xxx_get_sys_info(struct scsi_qla_host *ha)
>         ha->phy_port_num = sys_info->port_num;
>         ha->iscsi_pci_func_cnt = sys_info->iscsi_pci_func_cnt;
>
> -       DEBUG2(printk("scsi%ld: %s: "
> -           "mac %02x:%02x:%02x:%02x:%02x:%02x "
> -           "serial %s\n", ha->host_no, __func__,
> -           ha->my_mac[0], ha->my_mac[1], ha->my_mac[2],
> -           ha->my_mac[3], ha->my_mac[4], ha->my_mac[5],
> -           ha->serial_number));
> +       DEBUG2(printk("scsi%ld: %s: mac %pM serial %s\n", ha->host_no,
> +           __func__, ha->my_mac, ha->serial_number));
>
>         status = QLA_SUCCESS;
>
> diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
> index b246b3c..2797b8f 100644
> --- a/drivers/scsi/qla4xxx/ql4_os.c
> +++ b/drivers/scsi/qla4xxx/ql4_os.c
> @@ -4786,13 +4786,9 @@ static int qla4xxx_compare_tuple_ddb(struct scsi_qla_host *ha,
>          * ISID would not match firmware generated ISID.
>          */
>         if (is_isid_compare) {
> -               DEBUG2(ql4_printk(KERN_INFO, ha, "%s: old ISID [%02x%02x%02x"
> -                       "%02x%02x%02x] New ISID [%02x%02x%02x%02x%02x%02x]\n",
> -                       __func__, old_tddb->isid[5], old_tddb->isid[4],
> -                       old_tddb->isid[3], old_tddb->isid[2], old_tddb->isid[1],
> -                       old_tddb->isid[0], new_tddb->isid[5], new_tddb->isid[4],
> -                       new_tddb->isid[3], new_tddb->isid[2], new_tddb->isid[1],
> -                       new_tddb->isid[0]));
> +               DEBUG2(ql4_printk(KERN_INFO, ha,
> +                       "%s: old ISID [%pmR] New ISID [%pmR]\n",
> +                       __func__, old_tddb->isid, new_tddb->isid));
>
>                 if (memcmp(&old_tddb->isid[0], &new_tddb->isid[0],
>                            sizeof(old_tddb->isid)))
> @@ -6211,10 +6207,7 @@ qla4xxx_sysfs_ddb_get_param(struct iscsi_bus_flash_session *fnode_sess,
>                 rc = sprintf(buf, "%u\n", fnode_conn->keepalive_timeout);
>                 break;
>         case ISCSI_FLASHNODE_ISID:
> -               rc = sprintf(buf, "%02x%02x%02x%02x%02x%02x\n",
> -                            fnode_sess->isid[0], fnode_sess->isid[1],
> -                            fnode_sess->isid[2], fnode_sess->isid[3],
> -                            fnode_sess->isid[4], fnode_sess->isid[5]);
> +               rc = sprintf(buf, "%pm\n", fnode_sess->isid);
>                 break;
>         case ISCSI_FLASHNODE_TSID:
>                 rc = sprintf(buf, "%u\n", fnode_sess->tsid);
> --
> 1.8.3.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
With Best Regards,
Andy Shevchenko

      reply	other threads:[~2015-03-18  8:47 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-25  9:10 [PATCHv2 0/3] qla2xxx, qla4xxx: re-use %p[hmM] specifiers to print variables Andy Shevchenko
2013-07-25  9:10 ` [PATCHv2 1/3] scsi: qla2xxx: print some variables via %*phC or %*phN format Andy Shevchenko
2013-07-25  9:10 ` [PATCHv2 2/3] scsi: qla2xxx: print MAC via %pMR Andy Shevchenko
2013-07-25  9:10 ` [PATCHv2 3/3] scsi: qla4xxx: print MAC and SID via %p[mM][R] Andy Shevchenko
2015-03-18  8:47   ` Andy Shevchenko [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAHp75VejNuP6SkoU7UZrj2q4PZmJkUySSL_HeEd7QaZ+6Adv8g@mail.gmail.com \
    --to=andy.shevchenko@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=linux-driver@qlogic.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=oleksandr.khoshaba@gmail.com \
    --cc=saurav.kashyap@qlogic.com \
    --cc=vikas.chaudhary@qlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.