[U-Boot] [PATCH 11/11] ventana: switch to SPL

[Tim Harvey <tharvey@gateworks.com>]

On Wed, Apr 2, 2014 at 11:01 PM, Tim Harvey <tharvey@gateworks.com> wrote:
> Switch to an SPL image. The SPL for Ventana does the following:
>  - setup i2c and read the factory programmed EEPROM to obtain DRAM config
>    and model for board-specific calibration data
>  - configure DRAM per CPU/size/layout/devices/calibration
>  - load u-boot.img from NAND and jump to it
>
> This allows for a single SPL+u-boot.img to replace the previous multiple board
> configurations.
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
<snip>
> diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
> new file mode 100644
> index 0000000..492c814
> --- /dev/null
> +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
> @@ -0,0 +1,394 @@
> +/*
> + * Author: Tim Harvey <tharvey@gateworks.com>
> + *
> + * SPDX-License-Identifier:     GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <i2c.h>
> +#include <asm/io.h>
> +#include <asm/arch/iomux.h>
> +#include <asm/arch/mx6_ddr_regs.h>

this header is non-existent and the include should be removed. I left
this in by accident.

Tim