All of lore.kernel.org
 help / color / mirror / Atom feed
From: Micah Morton <mortonm-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
To: amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: GPU passthrough support for Stoney [Radeon R2/R3/R4/R5 Graphics]?
Date: Wed, 15 May 2019 11:26:00 -0700	[thread overview]
Message-ID: <CAJ-EccO1ue5hTtJ8m4utQp+8dSsWm60JFA5YOT1gCODnYcFUog@mail.gmail.com> (raw)

Hi folks,

I'm interested in running a VM on a system with an integrated Stoney
[Radeon R2/R3/R4/R5 Graphics] card and passing through the graphics
card to the VM using the IOMMU. I'm wondering whether this is feasible
and supposed to be doable with the right setup (as opposed to passing
a discrete GPU to the VM, which I think is definitely doable?).

So far, I can do all the qemu/kvm/vfio/iommu stuff to run the VM and
pass the integrated GPU to it, but the drm driver in the VM fails
during amdgpu_device_init(). Specifically, the logs show the SMU being
unresponsive, which leads to a 'SMU firmware load failed' error
message and kernel panic. I can share VM logs and the invocation of
qemu and such if helpful, but first wanted to know at a high level if
this should be feasible?

P.S.: I'm not initializing the GPU in the host bios or host kernel at
all, so I should be passing a fresh GPU to the VM. Also, I'm pretty
sure I'm running the correct VGA bios for this GPU in the guest VM
bios before guest boot.

Any comments/suggestions would be appreciated!

Micah
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

             reply	other threads:[~2019-05-15 18:26 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-15 18:26 Micah Morton [this message]
     [not found] ` <CAJ-EccO1ue5hTtJ8m4utQp+8dSsWm60JFA5YOT1gCODnYcFUog-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-16  2:19   ` GPU passthrough support for Stoney [Radeon R2/R3/R4/R5 Graphics]? Alex Deucher
     [not found]     ` <CADnq5_N=-cWz99T4ma_=6-_bu-Ty2twsFt=KGtzTdWn1hcDSrA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-16 20:07       ` Micah Morton
     [not found]         ` <CAJ-EccOH2dXPD+XeHQcqZYD+xa2eB6SVp6oFk4AD0vy=H+9+0w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-16 20:39           ` Alex Deucher
     [not found]             ` <CADnq5_OTk4nE4G6FHmSRmvNLNO4hJbVC9cuxAiGEZk1_b2C=9w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-17 15:35               ` Micah Morton
     [not found]                 ` <CAJ-EccPFdxNTe5ESwJDg0MKSZasigkcg9CjxN__MgXaF2RURQw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-17 16:59                   ` Alex Deucher
     [not found]                     ` <CADnq5_Osm1NaWWrDNpNNV1c+nyw3NfPyEi=_RjuUNh7hkAfzvQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-21 17:45                       ` Micah Morton
     [not found]                         ` <CAJ-EccNEMO3XbHWgUUpNtnJM7v1P4uCWF-v4hgq4fG45v3GvXg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-22 20:39                           ` Alex Deucher
     [not found]                             ` <CADnq5_NxmBbcJ8oy8vu-ajWfaRqwqiBuHKnwDJk+-Sp2NCM7mg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-22 23:00                               ` Micah Morton
     [not found]                                 ` <CAJ-EccP1AqqjE0jfjGag4xv1Ox8fY0E6vXQvudKy+xnvaeti_A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-23  1:10                                   ` Alex Deucher
     [not found]                                     ` <CADnq5_OMgNfUauHxsmctHV31-ac+O9keWvJ2kfpAmjv0sob=hQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-23 16:55                                       ` Micah Morton
     [not found]                                         ` <CAJ-EccPRbOXkVXh8jiqeKSgB9VSX71biuNn5zPgeh3PM9bxW5Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-05-23 19:18                                           ` Micah Morton
  -- strict thread matches above, loose matches on Subject: below --
2019-05-15 18:14 Micah Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAJ-EccO1ue5hTtJ8m4utQp+8dSsWm60JFA5YOT1gCODnYcFUog@mail.gmail.com \
    --to=mortonm-f7+t8e8rja9g9huczpvpmw@public.gmane.org \
    --cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.