From: Harshal Chhaya <harshal@gmail.com>
To: linux-wireless <linux-wireless@vger.kernel.org>
Subject: carl9170: Lots of 'device restart'
Date: Fri, 13 Apr 2012 11:36:10 -0500 [thread overview]
Message-ID: <CAJ8GFOgGbZs=Zkomuf3q65vfQJnR47p894AjOeuXKy58NA0tKQ@mail.gmail.com> (raw)
Hello,
Here is the console log from an instance when my carl9170-based AP was
stuck in a bad state. The "Dhcp:" messages are from my user-level
application and are merely informative.
Any ideas on what could have caused so many "device restarts"? The AP
was unusable for ~10 min and fixed itself after that. Is the failed
channel change an indication?
[ 57.355377] ieee80211 phy1: channel change: 2437 -> 2437 failed (2).
#### hostapd started
Dhcp: Lease count changed: 17 -> 23
[ 74.126281] usb 1-1: restart device (4)
[ 75.270019] usb 1-1: device restarted successfully.
[ 75.282958] ieee80211 phy1: Hardware restart was requested
[ 76.095520] ieee80211 phy1: channel change: 2437 -> 2437 failed (2).
[ 83.962158] usb 1-1: restart device (4)
[ 85.105957] usb 1-1: device restarted successfully.
[ 85.117248] ieee80211 phy1: Hardware restart was requested
[ 85.925445] ieee80211 phy1: channel change: 2437 -> 2437 failed (2).
[ 101.475524] ieee80211 phy1: invalid plcp cck rate (0).
[ 105.235229] ieee80211 phy1: invalid plcp cck rate (0).
[ 116.718292] ieee80211 phy1: invalid plcp cck rate (0).
[ 123.892150] usb 1-1: restart device (4)
[ 125.035339] usb 1-1: device restarted successfully.
[ 125.050964] ieee80211 phy1: Hardware restart was requested
Dhcp: Lease count changed: 23 -> 27
Dhcp: Lease count changed: 31 -> 35
[ 213.108276] ieee80211 phy1: invalid plcp cck rate (0).
[ 236.235626] usb 1-1: restart device (4)
[ 237.379180] usb 1-1: device restarted successfully.
[ 237.397216] ieee80211 phy1: Hardware restart was requested
[ 245.719970] usb 1-1: restart device (4)
[ 246.863586] usb 1-1: device restarted successfully.
[ 246.882110] ieee80211 phy1: Hardware restart was requested
[ 247.692077] ieee80211 phy1: channel change: 2437 -> 2437 failed (2).
[ 260.595031] usb 1-1: restart device (4)
[ 261.738433] usb 1-1: device restarted successfully.
[ 261.752441] ieee80211 phy1: Hardware restart was requested
[ 270.933074] ieee80211 phy1: invalid plcp cck rate (0).
[ 285.126220] usb 1-1: restart device (4)
[ 286.269622] usb 1-1: device restarted successfully.
[ 286.295989] ieee80211 phy1: Hardware restart was requested
[ 297.403289] ieee80211 phy1: invalid plcp cck rate (0).
[ 362.321533] usb 1-1: restart device (4)
[ 363.465087] usb 1-1: device restarted successfully.
[ 363.478973] ieee80211 phy1: Hardware restart was requested
[ 365.365234] ieee80211 phy1: invalid plcp cck rate (0).
[ 373.162506] ieee80211 phy1: invalid plcp cck rate (0).
[ 379.313629] usb 1-1: restart device (4)
[ 380.321624] usb 1-1: kill pending tx urbs.
[ 381.465850] usb 1-1: device restarted successfully.
[ 381.503601] ieee80211 phy1: Hardware restart was requested
[ 402.352691] usb 1-1: restart device (4)
[ 403.497619] usb 1-1: device restarted successfully.
[ 403.539215] ieee80211 phy1: Hardware restart was requested
[ 419.376220] usb 1-1: restart device (4)
[ 420.519714] usb 1-1: device restarted successfully.
[ 420.541839] ieee80211 phy1: Hardware restart was requested
[ 425.160736] ieee80211 phy1: invalid plcp cck rate (0).
[ 429.087493] ieee80211 phy1: invalid plcp cck rate (0).
[ 443.876251] usb 1-1: restart device (4)
[ 445.027557] usb 1-1: device restarted successfully.
[ 445.061523] ieee80211 phy1: Hardware restart was requested
[ 453.605346] ieee80211 phy1: invalid plcp cck rate (0).
[ 460.923065] usb 1-1: restart device (4)
[ 462.066619] usb 1-1: device restarted successfully.
[ 462.079711] ieee80211 phy1: Hardware restart was requested
[ 468.083282] ieee80211 phy1: invalid plcp cck rate (0).
[ 476.703277] ieee80211 phy1: invalid plcp cck rate (0).
[ 485.423095] usb 1-1: restart device (4)
[ 486.566833] usb 1-1: device restarted successfully.
[ 486.580322] ieee80211 phy1: Hardware restart was requested
[ 494.907440] usb 1-1: restart device (4)
[ 496.051025] usb 1-1: device restarted successfully.
[ 496.064727] ieee80211 phy1: Hardware restart was requested
[ 509.407470] usb 1-1: restart device (4)
[ 510.550872] usb 1-1: device restarted successfully.
[ 510.563232] ieee80211 phy1: Hardware restart was requested
[ 511.534698] ieee80211 phy1: invalid plcp cck rate (0).
[ 602.615661] ieee80211 phy1: invalid plcp cck rate (0).
[ 616.634002] usb 1-1: restart device (4)
[ 617.777526] usb 1-1: device restarted successfully.
[ 617.816711] ieee80211 phy1: Hardware restart was requested
Dhcp: Lease count changed: 35 -> 37
Dhcp: Lease count changed: 37 -> 42
Dhcp: Lease count changed: 42 -> 43
[ 662.467742] ieee80211 phy1: invalid plcp cck rate (0).
Dhcp: Lease count changed: 43 -> 50
Dhcp: Lease count changed: 50 -> 54
Thanks,
- Harshal
next reply other threads:[~2012-04-13 16:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-13 16:36 Harshal Chhaya [this message]
2012-04-13 18:07 ` carl9170: Lots of 'device restart' Christian Lamparter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJ8GFOgGbZs=Zkomuf3q65vfQJnR47p894AjOeuXKy58NA0tKQ@mail.gmail.com' \
--to=harshal@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.