By kernel are you referring to the yocto's kernel or my host machine kernel?

if it is host machine kernel then i have the drivers

and , what should i do with connman?

thanks

Rajath C S,
9964182112,

Bangalore - 560060

On Wed, Mar 21, 2018 at 5:02 PM, Burton, Ross <ross.burton@intel.com> wrote:

I never mentioned glib-networking and it wont help at all.

If connman can't see your wifi then your kernel is missing the drivers  you need.

Ross

On 21 March 2018 at 10:53, Rajath C S <rajathcs.1996@gmail.com> wrote:

yes, when clicked on it. it says Ethernet connection

so, inside oe-core there is a folder and file called : glib-networking_2.54.1.bb; so now acording to your second msg to enable wifi should i include this file in MAGE_INSTALL_append command of local.conf?

Rajath C S,
9964182112,

Bangalore - 560060

On Wed, Mar 21, 2018 at 4:14 PM, Burton, Ross <ross.burton@intel.com> wrote:

Then you have a nice button in the top right to setup wifi already.

Ross

On 21 March 2018 at 10:42, Rajath C S <rajathcs.1996@gmail.com> wrote:

sure, i will look into that, thanks.

and , i am actually using core-image-sato

regards,

Rajath C S

Rajath C S,
9964182112,

Bangalore - 560060

On Wed, Mar 21, 2018 at 4:11 PM, Burton, Ross <ross.burton@intel.com> wrote:

Ideally in an image of your own creation, as local.conf tweaking is for experimentation only.

There's a section in the manual about customising images, and I recommend that you start from an image with functionality instead of starting from a minimal image and trying to discover how to do basics such as make networking functional.

Ross

On 21 March 2018 at 10:35, Rajath C S <rajathcs.1996@gmail.com> wrote:

so the  connman / ifupdown and wireless-tools have to be placed in the local.conf file right?

Rajath C S,
9964182112,

Bangalore - 560060

On Wed, Mar 21, 2018 at 3:57 PM, Burton, Ross <ross.burton@intel.com> wrote:

ifupdown and wireless-tools will give you the basics to configure it by hand, or use connman.  Or network-manager, in meta-oe.

core-image-sato includes both connman and a UI to join to wifi.

Ross

On 21 March 2018 at 10:25, Rajath C S <rajathcs.1996@gmail.com> wrote:

thanks,

i will follow the said things,

but as of now my situation is as such : "

sure, i will have one other question that is how to establish internet connection on to poky?

that is , i have placed the meta-networking layer in bblayer.conf file so after that which recipe should i add to local.conf so that wireless connection is established on the poky?

Do help with the steps

Thanks"

I will try and implement networking from oe-core

Rajath C S,
9964182112,

Bangalore - 560060

On Wed, Mar 21, 2018 at 3:40 PM, Burton, Ross <ross.burton@intel.com> wrote:

First, you don't need meta-networking to make networking "work", because oe-core has the basics.

Second, you need to match the release of layers.  You're using meta-networking master, and a previous release of poky.  Checkout the corresponding release branch of meta-networking.

Ross

On 21 March 2018 at 07:29, Rajath C S <rajathcs.1996@gmail.com> wrote:

I am tryiing to add meta-networking layer (to get Internet connection to poky)and i have included the following line of code in bbconfig file
/home/jarvis/poky/meta-openembedded/meta-networking \

but while building i get this below error

ERROR: ExpansionError during parsing /home/jarvis/poky/meta-openembedded/meta-networking/recipes-support/libtdb/libtdb_1.3.15.bb
Traceback (most recent call last):
bb.data_smart.ExpansionError: Failure expanding variable do_compile, expression was     python ./buildtools/bin/waf ${@oe.utils.parallel_make_argument(d, '-j%d', limit=64)}
 which triggered exception AttributeError: module 'oe.utils' has no attribute 'parallel_make_argument'

DO help,

is there any other way to establish Internet connection inside poky?

Thanks

--
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core