From mboxrd@z Thu Jan  1 00:00:00 1970
From: Franck Jullien <franck.jullien@gmail.com>
Date: Fri, 14 Feb 2014 11:24:05 +0100
Subject: [U-Boot] T1040 booting from NOR Flash
In-Reply-To: <loom.20140213T014241-655@post.gmane.org>
References: <CAJfOKByC6gKscU4e7=S3DpZZGDE7jb5oaDr4j6uVE0WbK2RJ3A@mail.gmail.com>
	<loom.20140213T014241-655@post.gmane.org>
Message-ID: <CAJfOKBx8ErWLrOJo-CBO=9a0uETiWx1O6X7QdWKXZ34pv_zVzA@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

2014-02-13 1:56 GMT+01:00 Rommel G Custodio <sessyargc+u-boot@gmail.com>:
> Dear Franck Jullien,
>
> Franck Jullien <franck.jullien <at> gmail.com> writes:
>
>>
>> Hi,
>>
>> I'd like to know if I have understood it correctly.
>>
>> When first time booting from NOR, the RCW and PBI must be written
>> using the JTAG. The last instruction of the PBI must be a jump
>> (0x13_8080) to the user's code (uboot here).
>
> You should not need to bring out the JTAG.
>
> The build process for other FSL boards that require RCW (i.e. P5040) can
> create a single binary that includes RCW, PBI, and u-boot.
>
> BUT the T1040 right now does not have a build target that creates this
> binary! It seems FSL hasn't gotten about to creating it yet (not in mailine,
> not in patchworks, none in the FSL SDK).
>
>>
>> Am I right ?
>>
>> Best regards,
>>
>> Franck.
>>
>
> All the best,
> Rommel
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

I did see other platforms generates PBL images with RCW and PBI
built-in. However, this is always with CONFIG_RAMBOOT_PBL set (SPI,
NAND or SD-CARD boot).
This is the memory map described in the t104xrdb/README file:

NOR Flash memory Map
---------------------
163  Start          End             Definition                       Size
164 0xEFF40000      0xEFFFFFFF      u-boot (current bank)            768KB
....
177 0xE8000000      0xE801FFFF      RCW (current bank)               128KB


For me, it means the RCW will not be included in the u-boot binary.

Franck.