All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Matwey V. Kornilov" <matwey@sai.msu.ru>
To: Robert Nelson <robertcnelson@gmail.com>
Cc: "Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"open list:OMAP DEVICE TREE SUPPORT" <linux-omap@vger.kernel.org>,
	"open list:OMAP DEVICE TREE SUPPORT" <devicetree@vger.kernel.org>,
	"open list" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] arm: dts: am335x-boneblack-common: fix memory size
Date: Mon, 6 Jan 2020 23:47:36 +0300	[thread overview]
Message-ID: <CAJs94EbUL6o9sM+pwxwpqHVDkFqy7wFRirET-Vq3SNVd3grUsA@mail.gmail.com> (raw)
In-Reply-To: <CAOCHtYgyN+qXXX1YeEcO+nvRFrAL1HAVVMvjfeJ5nvxVjtFKtg@mail.gmail.com>

пн, 6 янв. 2020 г. в 23:44, Robert Nelson <robertcnelson@gmail.com>:
>
> On Mon, Jan 6, 2020 at 7:10 AM Matwey V. Kornilov <matwey@sai.msu.ru> wrote:
> >
> > BeagleBone Black series is equipped with 512MB RAM
> > whereas only 256MB is included from am335x-bone-common.dtsi
>
> FYI: While all versions from the factory are 512MB, some 3rd parties
> offered 1GB reballing upgrades..
>
> and the SanCloud variant which uses this file, was built with 1GB:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/am335x-sancloud-bbe.dts
>
> >
> > This leads to an issue with unusual setups when devicetree
> > is loaded by GRUB2 directly.
>
> It's a miracle, since when did GRUB2 gain this ability?
>

I am not sure about when. But Grub 2.02 has devicetree command, which
can be used as the following:

        echo "Loading device tree blob ..."
        devicetree (tftp)/dtb/am335x-boneblack.dtb

And you know, you can run Grub itself as EFI application on to of u-boot.

> >
> > Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
> > ---
> >  arch/arm/boot/dts/am335x-boneblack-common.dtsi | 5 +++++
> >  1 file changed, 5 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
> > index 7ad079861efd..91f93bc89716 100644
> > --- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
> > +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
> > @@ -131,6 +131,11 @@
> >  };
> >
> >  / {
> > +       memory@80000000 {
> > +               device_type = "memory";
> > +               reg = <0x80000000 0x20000000>; /* 512 MB */
> > +       };
> > +
> >         clk_mcasp0_fixed: clk_mcasp0_fixed {
> >                 #clock-cells = <0>;
> >                 compatible = "fixed-clock";
> > --
> > 2.16.4
> >
>
>
> --
> Robert Nelson
> https://rcn-ee.com/



-- 
With best regards,
Matwey V. Kornilov.
Sternberg Astronomical Institute, Lomonosov Moscow State University, Russia
119234, Moscow, Universitetsky pr-k 13, +7 (495) 9392382

  reply	other threads:[~2020-01-06 20:47 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-06 13:09 [PATCH] arm: dts: am335x-boneblack-common: fix memory size Matwey V. Kornilov
2020-01-06 13:09 ` Matwey V. Kornilov
2020-01-06 20:43 ` Robert Nelson
2020-01-06 20:47   ` Matwey V. Kornilov [this message]
2020-01-06 21:05     ` Tony Lindgren
2020-01-07 18:32       ` Robert Nelson
2020-01-13 17:50         ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAJs94EbUL6o9sM+pwxwpqHVDkFqy7wFRirET-Vq3SNVd3grUsA@mail.gmail.com \
    --to=matwey@sai.msu.ru \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robertcnelson@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.