* dnf error coming while compiling core-image-sato image.
@ 2020-10-18 10:41 NIKHIL PATIL
2020-10-20 1:19 ` [yocto] " Randy MacLeod
0 siblings, 1 reply; 8+ messages in thread
From: NIKHIL PATIL @ 2020-10-18 10:41 UTC (permalink / raw)
To: yocto+help, yocto
[-- Attachment #1: Type: text/plain, Size: 1892 bytes --]
Hi team ,
I am getting continuously dnf error, How we can resolve these .
core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command
'/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf
-y -c
/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf
--setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d
--repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
--installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs
--setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp
-x packagegroup-core-apl-extra --nogpgcheck install autoconf-archive dnf
gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0
libtcti-device-dev libtcti-device-staticdev libtcti-socket0
libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev
libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs
packagegroup-base-extended packagegroup-core-audio-essential
packagegroup-core-boot packagegroup-core-buildessential-extended
packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear
packagegroup-core-tools-testapps packagegroup-core-x11-base
packagegroup-core-x11-sato psplash rpm run-postinsts swig tpm2-abrmd
usb-modeswitch usb-modeswitch-data va-intel wayland weston weston-examples
xinit-env xserver-xorg locale-base-en-us locale-base-en-gb' returned 1:
Added oe-repo repo from
/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
[-- Attachment #2: Type: text/html, Size: 2317 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image.
2020-10-18 10:41 dnf error coming while compiling core-image-sato image NIKHIL PATIL
@ 2020-10-20 1:19 ` Randy MacLeod
2020-10-20 13:06 ` NIKHIL PATIL
0 siblings, 1 reply; 8+ messages in thread
From: Randy MacLeod @ 2020-10-20 1:19 UTC (permalink / raw)
To: NIKHIL PATIL, yocto+help, yocto
On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote:
> Hi team ,
> I am getting continuously dnf error, How we can resolve these .
Hi Nikhil,
What exact steps did you take before getting this error and
what build host are you using?
Are you able to build core-image-minimal using oe-core/master
and the default local.conf for qemux86-64?
../Randy
>
> core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command
> '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf
> -y -c
> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf
> --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d
> --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
> --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs
> --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp
> -x packagegroup-core-apl-extra --nogpgcheck install autoconf-archive dnf
> gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0
> libtcti-device-dev libtcti-device-staticdev libtcti-socket0
> libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev
> libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs
> packagegroup-base-extended packagegroup-core-audio-essential
> packagegroup-core-boot packagegroup-core-buildessential-extended
> packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear
> packagegroup-core-tools-testapps packagegroup-core-x11-base
> packagegroup-core-x11-sato psplash rpm run-postinsts swig tpm2-abrmd
> usb-modeswitch usb-modeswitch-data va-intel wayland weston
> weston-examples xinit-env xserver-xorg locale-base-en-us
> locale-base-en-gb' returned 1:
> Added oe-repo repo from
> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
>
>
>
>
>
--
# Randy MacLeod
# Wind River Linux
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image.
2020-10-20 1:19 ` [yocto] " Randy MacLeod
@ 2020-10-20 13:06 ` NIKHIL PATIL
2020-10-20 14:20 ` Randy MacLeod
2020-10-21 5:00 ` Yocto
0 siblings, 2 replies; 8+ messages in thread
From: NIKHIL PATIL @ 2020-10-20 13:06 UTC (permalink / raw)
To: Randy MacLeod; +Cc: yocto+help, yocto
[-- Attachment #1: Type: text/plain, Size: 2607 bytes --]
I changed in local.conf (ostree related stuffs ), and put it for
compilation , that time i got these error
On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod <randy.macleod@windriver.com>
wrote:
> On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote:
> > Hi team ,
> > I am getting continuously dnf error, How we can resolve these .
>
> Hi Nikhil,
>
> What exact steps did you take before getting this error and
> what build host are you using?
>
> Are you able to build core-image-minimal using oe-core/master
> and the default local.conf for qemux86-64?
>
> ../Randy
>
> >
> > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command
> >
> '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf
>
> > -y -c
> >
> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf
>
> >
> --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d
>
> >
> --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
>
> >
> --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs
>
> >
> --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp
>
> > -x packagegroup-core-apl-extra --nogpgcheck install autoconf-archive dnf
> > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0
> > libtcti-device-dev libtcti-device-staticdev libtcti-socket0
> > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev
> > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs
> > packagegroup-base-extended packagegroup-core-audio-essential
> > packagegroup-core-boot packagegroup-core-buildessential-extended
> > packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear
> > packagegroup-core-tools-testapps packagegroup-core-x11-base
> > packagegroup-core-x11-sato psplash rpm run-postinsts swig tpm2-abrmd
> > usb-modeswitch usb-modeswitch-data va-intel wayland weston
> > weston-examples xinit-env xserver-xorg locale-base-en-us
> > locale-base-en-gb' returned 1:
> > Added oe-repo repo from
> >
> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
> >
> >
> >
> >
> >
>
>
> --
> # Randy MacLeod
> # Wind River Linux
>
[-- Attachment #2: Type: text/html, Size: 3085 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image.
2020-10-20 13:06 ` NIKHIL PATIL
@ 2020-10-20 14:20 ` Randy MacLeod
2020-10-21 4:53 ` NIKHIL PATIL
2020-10-21 5:00 ` Yocto
1 sibling, 1 reply; 8+ messages in thread
From: Randy MacLeod @ 2020-10-20 14:20 UTC (permalink / raw)
To: NIKHIL PATIL; +Cc: yocto+help, yocto
On 2020-10-20 9:06 a.m., NIKHIL PATIL wrote:
> I changed in local.conf (ostree related stuffs ), and put it for
> compilation , that time i got these error
Hi Nikhil,
We encourage people to avoid top-posting so that discussions are
easier to read:
https://wiki.yoctoproject.org/wiki/Community_Guidelines#Mailing_List_Guidelines
Your description doesn't enable anyone else to reproduce what you are
doing. What git repos (oe-core/poky/bitbake/...) are you using and
what commit is at the HEAD of each?
You have no doubt sourced the oe-init-build-env file, otherwise bitbake
wouldn't work. Can you do that again and send either your full
conf/local.conf file or the lines that you added.
You might read:
https://wiki.yoctoproject.org/wiki/Bug_reporting_and_Information_levels
It's aimed at people opening bugs in the YP Bugzilla but the same rules
apply to email asking for help.
>
> On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod
> <randy.macleod@windriver.com <mailto:randy.macleod@windriver.com>> wrote:
>
> On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote:
> > Hi team ,
> > I am getting continuously dnf error, How we can
> resolve these .
>
> Hi Nikhil,
>
> What exact steps did you take before getting this error and
> what build host are you using?
>
> Are you able to build core-image-minimal using oe-core/master
> and the default local.conf for qemux86-64?
Please confirm that you are able to build core-image-minimal so
that people understand your level of experience when trying to help you.
../Randy
>
> ../Randy
>
> >
> > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command
> >
> '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf
>
> > -y -c
> >
> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf
>
> >
> --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d
>
> >
> --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
>
> >
> --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs
>
> >
> --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp
>
> > -x packagegroup-core-apl-extra --nogpgcheck install
> autoconf-archive dnf
> > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0
> > libtcti-device-dev libtcti-device-staticdev libtcti-socket0
> > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev
> > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs
> > packagegroup-base-extended packagegroup-core-audio-essential
> > packagegroup-core-boot packagegroup-core-buildessential-extended
> > packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear
> > packagegroup-core-tools-testapps packagegroup-core-x11-base
> > packagegroup-core-x11-sato psplash rpm run-postinsts swig tpm2-abrmd
> > usb-modeswitch usb-modeswitch-data va-intel wayland weston
> > weston-examples xinit-env xserver-xorg locale-base-en-us
> > locale-base-en-gb' returned 1:
> > Added oe-repo repo from
> >
> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
> >
> >
> >
> >
> >
>
>
> --
> # Randy MacLeod
> # Wind River Linux
>
--
# Randy MacLeod
# Wind River Linux
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image.
2020-10-20 14:20 ` Randy MacLeod
@ 2020-10-21 4:53 ` NIKHIL PATIL
0 siblings, 0 replies; 8+ messages in thread
From: NIKHIL PATIL @ 2020-10-21 4:53 UTC (permalink / raw)
To: Randy MacLeod; +Cc: yocto+help, yocto
[-- Attachment #1.1: Type: text/plain, Size: 4301 bytes --]
Hi team,
I am not able compile a core-image-minimal also. same issue facing here.
PFA (local.conf) .
On Tue, Oct 20, 2020 at 7:50 PM Randy MacLeod <randy.macleod@windriver.com>
wrote:
> On 2020-10-20 9:06 a.m., NIKHIL PATIL wrote:
> > I changed in local.conf (ostree related stuffs ), and put it for
> > compilation , that time i got these error
>
> Hi Nikhil,
>
> We encourage people to avoid top-posting so that discussions are
> easier to read:
>
>
> https://wiki.yoctoproject.org/wiki/Community_Guidelines#Mailing_List_Guidelines
>
> Your description doesn't enable anyone else to reproduce what you are
> doing. What git repos (oe-core/poky/bitbake/...) are you using and
> what commit is at the HEAD of each?
>
> You have no doubt sourced the oe-init-build-env file, otherwise bitbake
> wouldn't work. Can you do that again and send either your full
> conf/local.conf file or the lines that you added.
>
>
> You might read:
> https://wiki.yoctoproject.org/wiki/Bug_reporting_and_Information_levels
> It's aimed at people opening bugs in the YP Bugzilla but the same rules
> apply to email asking for help.
>
> >
> > On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod
> > <randy.macleod@windriver.com <mailto:randy.macleod@windriver.com>>
> wrote:
> >
> > On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote:
> > > Hi team ,
> > > I am getting continuously dnf error, How we can
> > resolve these .
> >
> > Hi Nikhil,
> >
> > What exact steps did you take before getting this error and
> > what build host are you using?
> >
> > Are you able to build core-image-minimal using oe-core/master
> > and the default local.conf for qemux86-64?
>
> Please confirm that you are able to build core-image-minimal so
> that people understand your level of experience when trying to help you.
>
> ../Randy
>
> >
> > ../Randy
> >
> > >
> > > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command
> > >
> >
> '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf
> >
> > > -y -c
> > >
> >
> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf
> >
> > >
> >
> --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d
> >
> > >
> >
> --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
> >
> > >
> >
> --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs
> >
> > >
> >
> --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp
> >
> > > -x packagegroup-core-apl-extra --nogpgcheck install
> > autoconf-archive dnf
> > > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0
> > > libtcti-device-dev libtcti-device-staticdev libtcti-socket0
> > > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev
> > > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs
> > > packagegroup-base-extended packagegroup-core-audio-essential
> > > packagegroup-core-boot packagegroup-core-buildessential-extended
> > > packagegroup-core-graphics-essential
> packagegroup-core-ssh-dropbear
> > > packagegroup-core-tools-testapps packagegroup-core-x11-base
> > > packagegroup-core-x11-sato psplash rpm run-postinsts swig
> tpm2-abrmd
> > > usb-modeswitch usb-modeswitch-data va-intel wayland weston
> > > weston-examples xinit-env xserver-xorg locale-base-en-us
> > > locale-base-en-gb' returned 1:
> > > Added oe-repo repo from
> > >
> >
> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
> > >
> > >
> > >
> > >
> > >
> >
> >
> > --
> > # Randy MacLeod
> > # Wind River Linux
> >
>
>
> --
> # Randy MacLeod
> # Wind River Linux
>
[-- Attachment #1.2: Type: text/html, Size: 5704 bytes --]
[-- Attachment #2: local.conf --]
[-- Type: application/octet-stream, Size: 16199 bytes --]
# This file is your local configuration file and is where all local user settings
# are placed. The comments in this file give some guide to the options a new user
# to the system might want to change but pretty much any configuration option can
# be set in this file. More adventurous users can look at local.conf.extended
# which contains other examples of configuration which can be placed in this file
# but new users likely won't need any of them initially.
#
# Lines starting with the '#' character are commented out and in some cases the
# default values are provided as comments to show people example syntax. Enabling
# the option is a question of removing the # character and making any change to the
# variable as required.
#
# Machine Selection
#
# This sets the default machine to be intel-corei7-64 if no other machine is selected:
MACHINE = "intel-corei7-64"
# This set the default kernel to linux-intel version 4.14 LTS
PREFERRED_PROVIDER_virtual/kernel = "linux-intel"
PREFERRED_VERSION_linux-intel = "4.14%"
#
# Leaf Hill BSP specific settings
#
# This sets BSP_SUBTYPE to leafhill.
# This setting is meant for Bitbake to pull the correct set of
# kernel config fragments in yocto-kernel-cache.
#
# It is not recommend to remove if your target platform is
# based on Intel Atom E3900 SoC Family.
BSP_SUBTYPE = "leafhill"
#Exclude piglit, ltp and mesa-demos packages
PACKAGE_EXCLUDE = "packagegroup-core-apl-extra"
#
# Apollo Lake Yocto BSP supports different Audio features,
# i.e. legacy HD-Audio, CAVS HD-Audio, and CAVS SSP Audio codec support.
#
# By default, this configuration will build CAVS HD-Audio feature.
# To build CAVS SSP Audio feature, uncomment the line below.
#AUDIO_FEATURES = "ssp"
#
# Machine Configuration Override for Apollo Lake platform
#
# This is a stopgap measure for configuring machine settings for Apollo Lake platform
# primarily for Pre-Production SW release until the changes are upstream to Yocto Project.
# These settings are applicable for Intel Apollo Lake project only.
# Please comment out when you are compiling for other projects.
# Uncomment when you are integrating closed source media stack
#MACHINE_HWCODECS = ""
OLD_XSERVER_X86_EXT = ""
XSERVER_X86_MATROX_MGA = ""
XSERVER_X86_ASPEED_AST = ""
MACHINE_ESSENTIAL_EXTRA_RDEPENDS_remove = "intel-microcode"
INITRD_LIVE_remove = "${DEPLOY_DIR_IMAGE}/microcode.cpio"
# Make image boot to runlevel 3 by default
APPEND = "3 snd_hda_intel.power_save=1 snd_hda_intel.power_save_controller=y scsi_mod.scan=async i915.enable_guc_loading=1 reboot=efi console=ttyS2,115200n8"
WKS_FILE = "systemd-bootdisk-microcode-custom.wks"
#
# User Space Configuration Override for Apollo Lake Platform
#
# Selection of jpeg package provider
PREFERRED_PROVIDER_jpeg = "jpeg"
PREFERRED_PROVIDER_jpeg-native = "jpeg-native"
# Enable xserver-xorg
IMAGE_INSTALL_append = " xserver-xorg"
# Enable vp8dec for gstreamer1.0-plugins-good
PACKAGECONFIG_append_pn-gstreamer1.0-plugins-good = "vpx"
# Multi-libraries support is by default "OFF"
# Please uncomment the 4 lines below to enable multilib support.
#require conf/multilib.conf
#DEFAULTTUNE = "corei7-64"
#MULTILIBS = "multilib:lib32"
#DEFAULTTUNE_virtclass-multilib-lib32 = "corei7-32"
# Install autoconf-archive
IMAGE_INSTALL_append = " autoconf-archive"
# Install libva
IMAGE_INSTALL_append = " libva"
# Install Wayland in image
DISTRO_FEATURES_append = " wayland pam"
CORE_IMAGE_EXTRA_INSTALL += "wayland weston weston-examples"
# Install mesa glxinfo
IMAGE_INSTALL_append = " mesa-glxinfo"
# Install TPM2.0-TSS in image
IMAGE_INSTALL_append = " libtss2 libtss2-dev libtctidevice libtctidevice-dev libtctisocket libtctisocket-dev"
IMAGE_INSTALL_append = " libtss2-staticdev libtctisocket-staticdev libtctidevice-staticdev"
# Install tpm2-abrmd in image
IMAGE_INSTALL_append = " tpm2-abrmd"
# Install MRAA and its dependencies in image
IMAGE_INSTALL_append = " nodejs swig mraa"
# Install USB-modeswitch and USB-modeswitch-data in image
IMAGE_INSTALL_append = " usb-modeswitch usb-modeswitch-data"
# Install JHI
IMAGE_INSTALL_append = " jhi"
# Install IQV driver
IMAGE_INSTALL_append = " iqvlinux"
# Disable lttng modules
LTTNGMODULES_corei7-64-intel-common = ""
# Install xinitrc environment file
IMAGE_INSTALL_append = " xinit-env"
# By default, we want our OS to includes all kernel modules.
IMAGE_INSTALL_append = " kernel-modules"
# Take note that as we are building 3rd party ingredient.
# We need the LICENSE_FLAGS below.
LICENSE_FLAGS_WHITELIST += "commercial"
# Use systemd init instead of sysV init
DISTRO_FEATURES_append = " systemd"
VIRTUAL-RUNTIME_init_manager = "systemd"
DISTRO_FEATURES_BACKFILL_CONSIDERED = "sysvinit"
#
# Where to place downloads
#
# During a first build the system will download many different source code tarballs
# from various upstream projects. This can take a while, particularly if your network
# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
# can preserve this directory to speed up this part of subsequent builds. This directory
# is safe to share between multiple builds on the same machine too.
#
# The default is a downloads directory under TOPDIR which is the build directory.
#
#DL_DIR ?= "${TOPDIR}/downloads"
#
# Where to place shared-state files
#
# BitBake has the capability to accelerate builds based on previously built output.
# This is done using "shared state" files which can be thought of as cache objects
# and this option determines where those files are placed.
#
# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
# from these files if no changes were made to the configuration. If changes were made
# to the configuration, only shared state files where the state was still valid would
# be used (done using checksums).
#
# The default is a sstate-cache directory under TOPDIR.
#
#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
#
# Where to place the build output
#
# This option specifies where the bulk of the building work should be done and
# where BitBake should place its temporary files and output. Keep in mind that
# this includes the extraction and compilation of many applications and the toolchain
# which can use Gigabytes of hard disk space.
#
# The default is a tmp directory under TOPDIR.
#
#TMPDIR = "${TOPDIR}/tmp"
#
# Default policy config
#
# The distribution setting controls which policy settings are used as defaults.
# The default value is fine for general Yocto project use, at least initially.
# Ultimately when creating custom policy, people will likely end up subclassing
# these defaults.
#
DISTRO ?= "poky"
# As an example of a subclass there is a "bleeding" edge policy configuration
# where many versions are set to the absolute latest code from the upstream
# source control systems. This is just mentioned here as an example, its not
# useful to most new users.
# DISTRO ?= "poky-bleeding"
#
# Package Management configuration
#
# This variable lists which packaging formats to enable. Multiple package backends
# can be enabled at once and the first item listed in the variable will be used
# to generate the root filesystems.
# Options are:
# - 'package_deb' for debian style deb files
# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
# - 'package_rpm' for rpm style packages
# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
# We default to rpm:
PACKAGE_CLASSES ?= "package_rpm"
#
# SDK/ADT target architecture
#
# This variable specifies the architecture to build SDK/ADT items for and means
# you can build the SDK packages for architectures other than the machine you are
# running the build on (i.e. building i686 packages on an x86_64 host).
# Supported values are i686 and x86_64
#SDKMACHINE ?= "i686"
#
# Extra image configuration defaults
#
# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
# images. Some of these options are added to certain image types automatically. The
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
# (useful if you want to run the package test suites)
# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
# "tools-debug" - add debugging tools (gdb, strace)
# "eclipse-debug" - add Eclipse remote debugging support
# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
# "debug-tweaks" - make an image suitable for development
# e.g. ssh root access has a blank password
# There are other application targets that can be used here too, see
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
# We default to enabling the debugging tweaks.
EXTRA_IMAGE_FEATURES = "debug-tweaks tools-testapps"
#
# Additional image features
#
# The following is a list of additional classes to use when building images which
# enable extra features. Some available options which can be included in this variable
# are:
# - 'buildstats' collect build statistics
# - 'image-mklibs' to reduce shared library files size for an image
# - 'image-prelink' in order to prelink the filesystem image
# - 'image-swab' to perform host system intrusion detection
# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
USER_CLASSES ?= "buildstats image-mklibs image-prelink"
#
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
# after any root filesystems are created and run tests against those images. To
# enable this uncomment this line. See classes/testimage(-auto).bbclass for
# further details.
#TEST_IMAGE = "1"
#
# Interactive shell configuration
#
# Under certain circumstances the system may need input from you and to do this it
# can launch an interactive shell. It needs to do this since the build is
# multithreaded and needs to be able to handle the case where more than one parallel
# process may require the user's attention. The default is iterate over the available
# terminal types to find one that works.
#
# Examples of the occasions this may happen are when resolving patches which cannot
# be applied, to use the devshell or the kernel menuconfig
#
# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
# Note: currently, Konsole support only works for KDE 3.x due to the way
# newer Konsole versions behave
#OE_TERMINAL = "auto"
# By default disable interactive patch resolution (tasks will just fail instead):
PATCHRESOLVE = "noop"
#
# Disk Space Monitoring during the build
#
# Monitor the disk space during the build. If there is less that 1GB of space or less
# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
# of the build. The reason for this is that running completely out of space can corrupt
# files and damages the build in ways which may not be easily recoverable.
BB_DISKMON_DIRS = "\
STOPTASKS,${TMPDIR},1G,100K \
STOPTASKS,${DL_DIR},1G,100K \
STOPTASKS,${SSTATE_DIR},1G,100K \
ABORT,${TMPDIR},100M,1K \
ABORT,${DL_DIR},100M,1K \
ABORT,${SSTATE_DIR},100M,1K"
#
# Shared-state files from other locations
#
# As mentioned above, shared state files are prebuilt cache data objects which can
# used to accelerate build time. This variable can be used to configure the system
# to search other mirror locations for these objects before it builds the data itself.
#
# This can be a filesystem directory, or a remote url such as http or ftp. These
# would contain the sstate-cache results from previous builds (possibly from other
# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
# cache locations to check for the shared objects.
# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
# at the end as shown in the examples below. This will be substituted with the
# correct path within the directory structure.
#SSTATE_MIRRORS ?= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
# seen. The two lines below enable the SDL backend too. This assumes there is a
# libsdl library available on your build system.
#PACKAGECONFIG_append_pn-qemu-native = " sdl"
#PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
#ASSUME_PROVIDED += "libsdl-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
# this doesn't mean anything to you.
CONF_VERSION = "1"
# Enable the security flags as per SDL 4.0 requirement
require conf/distro/include/security_flags.inc
SECURITY_CFLAGS = "-fstack-protector-strong -pie -fpie -D_FORTIFY_SOURCE=2 -O2 -Wformat -Wformat-security"
SECURITY_NO_PIE_CFLAGS = "-fstack-protector-strong -D_FORTIFY_SOURCE=2 -O2 -Wformat -Wformat-security"
SECURITY_LDFLAGS = "-Wl,-z,relro,-z,now,-z,noexecstack"
#AmitK OTA support
DISTRO = "poky-sota-systemd"
SRCREV_FORMAT = "1"
#LTE Support Added
#IMAGE_INSTALL_append = " l89irnss"
# General SOTA setup
SOTA_CLIENT_PROV = "aktualizr-shared-prov"
SOTA_PACKED_CREDENTIALS = "/praveen/inti_dmsv/yocto_build/credentials.zip"
# Uncomment this line to start an ssh server at boot automatically
#IMAGE_FEATURES += "ssh-server-dropbear"
# Uncomment this line to set the log level of aktualizr to 'debug' (from 'info'
# by default)
#IMAGE_INSTALL_append += " aktualizr-log-debug"
# Store systemd logs in persistent storage
#
# It greatly helps diagnosing issues on testing devices but should be
# carefully weighted against file system usage and flash device wear for
# production systems. Please refer to systemd's docs for more details
IMAGE_INSTALL_append += " systemd-journald-persistent"
OSTREE_BRANCHNAME = "crb-sota_test_new"
OSTREE_REPO = "${HOME}/praveen/public_html/ostree/repo"
OSTREE_REMOTE_URL = "http://192.168.150.11:8000"
OSTREE_OSNAME = "inti_dmsv"
#OSTREE_INITRAMFS_IMAGE ?= "initramfs-ostree-image"
# Set resource limits for aktualizr service
#
# Uncomment these lines to change the default parameters.
#
#RESOURCE_CPU_WEIGHT_pn-aktualizr = "100"
#RESOURCE_MEMORY_HIGH_pn-aktualizr = "100M"
#RESOURCE_MEMORY_MAX_pn-aktualizr = "80%"
IMAGE_INSTALL_append += " aktualizr-resource-control"
#IMAGE_INSTALL_append += " openssh"
#IMAGE_INSTALL_append += " openssh openssh-sftp"
################################################################################
#OSTREE_USE_AB ?= "1"
#Add the extra space to keep absorve the changes
#IMAGE_ROOTFS_EXTRA_SPACE= "2194304"
#IMAGE_ROOTFS_EXTRA_SPACE= "2515968"
INHERIT += "image-buildinfo"
IMAGE_TYPE="sato"
MY_BUILD_VERSION="1.0"
DEVICE_MODEL="CRB"
DEVICE_TYPE="${MACHINE}-${DEVICE_MODEL}"
IMAGE_BUILDINFO_VARS = "DISTRO DISTRO_VERSION MACHINE DEVICE_MODEL DEVICE_TYPE MY_BUILD_VERSION IMAGE_TYPE"
#Auto reboot support added
IMAGE_INSTALL_append += " aktualizr-auto-reboot"
IMAGE_INSTALL_append += " minicom"
IMAGE_INSTALL_append += " hello"
################################################################################
CORE_IMAGE_EXTRA_INSTALL += " openobex obex-data-server obexftp bluez5"
CORE_IMAGE_EXTRA_INSTALL += " bluez-tools"
CORE_IMAGE_EXTRA_INSTALL += " systemd systemtap"
CORE_IMAGE_EXTRA_INSTALL += " gcc gcc-sanitizers hostapd wpa-supplicant"
CORE_IMAGE_EXTRA_INSTALL += " dhcpcd dhcp-dbg dhcp-dev dhcp-doc dhcp-libs dhcp-server dhcp-server-config dhcp-client dhcp-relay dhcp-omshell"
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image.
2020-10-20 13:06 ` NIKHIL PATIL
2020-10-20 14:20 ` Randy MacLeod
@ 2020-10-21 5:00 ` Yocto
2020-10-21 10:38 ` NIKHIL PATIL
1 sibling, 1 reply; 8+ messages in thread
From: Yocto @ 2020-10-21 5:00 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 3048 bytes --]
On 10/20/20 8:06 PM, NIKHIL PATIL wrote:
> I changed in local.conf (ostree related stuffs ), and put it for
> compilation , that time i got these error
>
> On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod
> <randy.macleod@windriver.com <mailto:randy.macleod@windriver.com>> wrote:
>
> On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote:
> > Hi team ,
> > I am getting continuously dnf error, How we can
> resolve these .
>
> Hi Nikhil,
>
> What exact steps did you take before getting this error and
> what build host are you using?
>
> Are you able to build core-image-minimal using oe-core/master
> and the default local.conf for qemux86-64?
>
> ../Randy
>
I can confirm that Ive also seen this trying to build in the Yocto build
appliance I downloaded yesterday....
> >
> > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command
> >
> '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf
>
> > -y -c
> >
> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf
>
> >
> --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d
>
> >
> --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
>
> >
> --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs
>
> >
> --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp
>
> > -x packagegroup-core-apl-extra --nogpgcheck install
> autoconf-archive dnf
> > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0
> > libtcti-device-dev libtcti-device-staticdev libtcti-socket0
> > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev
> > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs
> > packagegroup-base-extended packagegroup-core-audio-essential
> > packagegroup-core-boot packagegroup-core-buildessential-extended
> > packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear
> > packagegroup-core-tools-testapps packagegroup-core-x11-base
> > packagegroup-core-x11-sato psplash rpm run-postinsts swig
> tpm2-abrmd
> > usb-modeswitch usb-modeswitch-data va-intel wayland weston
> > weston-examples xinit-env xserver-xorg locale-base-en-us
> > locale-base-en-gb' returned 1:
> > Added oe-repo repo from
> >
> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
> >
> >
> >
> >
> >
>
>
> --
> # Randy MacLeod
> # Wind River Linux
>
>
>
>
[-- Attachment #2: Type: text/html, Size: 5039 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image.
2020-10-21 5:00 ` Yocto
@ 2020-10-21 10:38 ` NIKHIL PATIL
2020-10-21 11:28 ` Yocto
0 siblings, 1 reply; 8+ messages in thread
From: NIKHIL PATIL @ 2020-10-21 10:38 UTC (permalink / raw)
To: Yocto; +Cc: yocto
[-- Attachment #1: Type: text/plain, Size: 3109 bytes --]
Hi team ,
I am assuming in local.conf we used DISTRO ?= "poky" and DISTRO =
"poky-sota-systemd" both thats why we are getting these error or what ?
On Wed, Oct 21, 2020 at 10:30 AM Yocto <yocto@optimcloud.com> wrote:
>
> On 10/20/20 8:06 PM, NIKHIL PATIL wrote:
>
> I changed in local.conf (ostree related stuffs ), and put it for
> compilation , that time i got these error
>
> On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod <randy.macleod@windriver.com>
> wrote:
>
>> On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote:
>> > Hi team ,
>> > I am getting continuously dnf error, How we can resolve these .
>>
>> Hi Nikhil,
>>
>> What exact steps did you take before getting this error and
>> what build host are you using?
>>
>> Are you able to build core-image-minimal using oe-core/master
>> and the default local.conf for qemux86-64?
>>
>> ../Randy
>>
>> I can confirm that Ive also seen this trying to build in the Yocto build
> appliance I downloaded yesterday....
>
>
>
> >
>> > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command
>> >
>> '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf
>>
>> > -y -c
>> >
>> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf
>>
>> >
>> --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d
>>
>> >
>> --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
>>
>> >
>> --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs
>>
>> >
>> --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp
>>
>> > -x packagegroup-core-apl-extra --nogpgcheck install autoconf-archive
>> dnf
>> > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0
>> > libtcti-device-dev libtcti-device-staticdev libtcti-socket0
>> > libtcti-socket-dev libtcti-socket-staticdev libsapi0 libsapi-dev
>> > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs
>> > packagegroup-base-extended packagegroup-core-audio-essential
>> > packagegroup-core-boot packagegroup-core-buildessential-extended
>> > packagegroup-core-graphics-essential packagegroup-core-ssh-dropbear
>> > packagegroup-core-tools-testapps packagegroup-core-x11-base
>> > packagegroup-core-x11-sato psplash rpm run-postinsts swig tpm2-abrmd
>> > usb-modeswitch usb-modeswitch-data va-intel wayland weston
>> > weston-examples xinit-env xserver-xorg locale-base-en-us
>> > locale-base-en-gb' returned 1:
>> > Added oe-repo repo from
>> >
>> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
>> >
>> >
>> >
>> >
>> >
>>
>>
>> --
>> # Randy MacLeod
>> # Wind River Linux
>>
>
>
>
>
>
[-- Attachment #2: Type: text/html, Size: 5136 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [yocto] dnf error coming while compiling core-image-sato image.
2020-10-21 10:38 ` NIKHIL PATIL
@ 2020-10-21 11:28 ` Yocto
0 siblings, 0 replies; 8+ messages in thread
From: Yocto @ 2020-10-21 11:28 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 4988 bytes --]
On 10/21/20 5:38 PM, NIKHIL PATIL wrote:
> Hi team ,
> I am assuming in local.conf we used DISTRO ?= "poky" and DISTRO
> = "poky-sota-systemd" both thats why we are getting these error or
> what ?
mmm nope...
Build Configuration:
BB_VERSION = "1.48.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "debian-10"
TARGET_SYS = "x86_64-overc-linux"
MACHINE = "intel-corei7-64"
DISTRO = "overc"
DISTRO_VERSION = "1.0"
TUNE_FEATURES = "m64 corei7"
TARGET_FPU = ""
meta
meta-poky
meta-yocto-bsp = "master:4e4a302e37ac06543e9983773cdb4caf7728330d"
meta-oe
meta-python
meta-networking
meta-filesystems
meta-gnome
meta-multimedia
meta-xfce
meta-perl = "master:de8198b93f8e524ab2f64fd138185824a79b18e6"
meta-overc
meta-cube = "master:af81bc7ec63e96aa7816b523b75ad9f29f9dfcf0"
meta-selinux = "master:6e1100d29aec118df2025c46c77f4c8aa8da4e76"
meta-security = "master:e8c9e69c80ea2c525250e07db1024d8e34f1f0f8"
meta-virtualization = "master:7a8167fa82621dd606260450b1e648e50a1d79ab"
meta-cloud-services = "master:4f6cd1d6664ca1a51bdc742291fe4bf83ecf2a92"
meta-intel = "master:0e4b3cb01735bdc5ebf50c547927f1f59b0248d2"
>
> On Wed, Oct 21, 2020 at 10:30 AM Yocto <yocto@optimcloud.com
> <mailto:yocto@optimcloud.com>> wrote:
>
>
> On 10/20/20 8:06 PM, NIKHIL PATIL wrote:
>> I changed in local.conf (ostree related stuffs ), and put it for
>> compilation , that time i got these error
>>
>> On Tue, Oct 20, 2020 at 6:49 AM Randy MacLeod
>> <randy.macleod@windriver.com
>> <mailto:randy.macleod@windriver.com>> wrote:
>>
>> On 2020-10-18 6:41 a.m., NIKHIL PATIL wrote:
>> > Hi team ,
>> > I am getting continuously dnf error, How we can
>> resolve these .
>>
>> Hi Nikhil,
>>
>> What exact steps did you take before getting this error and
>> what build host are you using?
>>
>> Are you able to build core-image-minimal using oe-core/master
>> and the default local.conf for qemux86-64?
>>
>> ../Randy
>>
> I can confirm that Ive also seen this trying to build in the Yocto
> build appliance I downloaded yesterday....
>
>
>
>> >
>> > core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf.
>> Command
>> >
>> '/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf
>>
>> > -y -c
>> >
>> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf
>>
>> >
>> --setopt=reposdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d
>>
>> >
>> --repofrompath=oe-repo,/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
>>
>> >
>> --installroot=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/rootfs
>>
>> >
>> --setopt=logdir=/data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/temp
>>
>> > -x packagegroup-core-apl-extra --nogpgcheck install
>> autoconf-archive dnf
>> > gstreamer1.0-vaapi iqvlinux jhi kernel-modules libtcti-device0
>> > libtcti-device-dev libtcti-device-staticdev libtcti-socket0
>> > libtcti-socket-dev libtcti-socket-staticdev libsapi0
>> libsapi-dev
>> > libsapi-staticdev libva mesa-glxinfo libmraa1 nodejs
>> > packagegroup-base-extended packagegroup-core-audio-essential
>> > packagegroup-core-boot
>> packagegroup-core-buildessential-extended
>> > packagegroup-core-graphics-essential
>> packagegroup-core-ssh-dropbear
>> > packagegroup-core-tools-testapps packagegroup-core-x11-base
>> > packagegroup-core-x11-sato psplash rpm run-postinsts swig
>> tpm2-abrmd
>> > usb-modeswitch usb-modeswitch-data va-intel wayland weston
>> > weston-examples xinit-env xserver-xorg locale-base-en-us
>> > locale-base-en-gb' returned 1:
>> > Added oe-repo repo from
>> >
>> /data/pradeep/inti_dmsv/yocto_build/build/tmp/work/intel_corei7_64-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
>> >
>> >
>> >
>> >
>> >
>>
>>
>> --
>> # Randy MacLeod
>> # Wind River Linux
>>
>>
>
>
>
>
>
>
[-- Attachment #2: Type: text/html, Size: 8802 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-10-21 11:28 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-18 10:41 dnf error coming while compiling core-image-sato image NIKHIL PATIL
2020-10-20 1:19 ` [yocto] " Randy MacLeod
2020-10-20 13:06 ` NIKHIL PATIL
2020-10-20 14:20 ` Randy MacLeod
2020-10-21 4:53 ` NIKHIL PATIL
2020-10-21 5:00 ` Yocto
2020-10-21 10:38 ` NIKHIL PATIL
2020-10-21 11:28 ` Yocto
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.