From: Sergio Correia <lists@uece.net>
To: Felix Fietkau <nbd@openwrt.org>
Cc: Michael Leun <ml@elektra.leun.net>,
Felipe Contreras <felipe.contreras@gmail.com>,
Michael Leun <lkml20120218@newton.leun.net>,
Mohammed Shafi <shafi.wireless@gmail.com>,
Ben Greear <greearb@candelatech.com>,
casteyde.christian@free.fr,
Kelly Anderson <kelly@silka.with-linux.com>,
"ath9k-devel@lists.ath9k.org" <ath9k-devel@venema.h4ckr.net>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-wireless Mailing List <linux-wireless@vger.kernel.org>
Subject: Re: 3.4-rc ath9k regression (Re: [ath9k-devel] 3.3.1 ath9k regression)
Date: Thu, 12 Apr 2012 15:28:56 -0400 [thread overview]
Message-ID: <CAJyhjX3W6LiTihWC5bRx6ShpKA8JUCSdJ+ry2gDE+=rpF5MytQ@mail.gmail.com> (raw)
In-Reply-To: <4F871AB8.3070302@openwrt.org>
Hello Felix,
On Thu, Apr 12, 2012 at 2:11 PM, Felix Fietkau <nbd@openwrt.org> wrote:
> On 2012-04-12 5:35 PM, Michael Leun wrote:
>> On Thu, 12 Apr 2012 16:58:34 +0300
>> Felipe Contreras <felipe.contreras@gmail.com> wrote:
>>
>>> On Thu, Apr 12, 2012 at 4:46 PM, Felix Fietkau <nbd@openwrt.org>
>>> wrote:
>>> > On 2012-04-09 5:29 PM, Michael Leun wrote:
>>> >> On Mon, 9 Apr 2012 19:52:45 +0530
>>>
>>> >> Seems obvious to me, that this line
>>> >>
>>> >> if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
>>> >>
>>> >> makes the real difference.
>>> > Please try this patch with plain 3.3.1 or 3.4-rc2 to see if it fixes
>>> > this issue:
>>>
>>> Nope, not here (3.3.1).
>>
>> Also negative for 3.4-rc2, but that SLEEP<>AWAKE noise at the end
>> stopped. Still need "iwconfig wlan0 essid <myssid>" to make it ping
>> again (that not included in log below).
> OK, so my fix is definitely worth submitting, since it gets rid of some
> unnecessary sleep mode transitions. About the iwconfig command: are you
> not using wpa_supplicant?
>
>> Due to Felipes result and 3.4-rc2 didn't repeat my test with 3.3.1, if
>> you think it would add useful information I could.
> Maybe it would be useful to get some more detailed logs from that.
>
your patch seems to work for me, with 3.3.1:
this is the log after I disable/re-enable the interface:
[ 216.202405] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 219.054925] wlan0: authenticate with 00:26:44:68:e0:6f (try 1)
[ 219.057190] wlan0: authenticated
[ 219.069573] wlan0: associate with 00:26:44:68:e0:6f (try 1)
[ 219.074450] wlan0: RX AssocResp from 00:26:44:68:e0:6f (capab=0x411
status=0 aid=2)
[ 219.074454] wlan0: associated
[ 219.074456] wlan0: moving STA 00:26:44:68:e0:6f to state 1
[ 219.074458] wlan0: moving STA 00:26:44:68:e0:6f to state 2
[ 219.075217] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 219.081856] wlan0: moving STA 00:26:44:68:e0:6f to state 3
[ 229.108248] wlan0: no IPv6 routers present
and here, after a suspend/resume cycle (whole log):
[ 369.398982] wlan0: deauthenticating from 00:26:44:68:e0:6f by local
choice (reason=3)
[ 369.399147] wlan0: moving STA 00:26:44:68:e0:6f to state 2
[ 369.399150] wlan0: moving STA 00:26:44:68:e0:6f to state 1
[ 369.399152] wlan0: moving STA 00:26:44:68:e0:6f to state 0
[ 369.401292] cfg80211: Calling CRDA to update world regulatory domain
[ 369.405877] cfg80211: World regulatory domain updated:
[ 369.405880] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 369.405883] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 369.405885] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 369.405887] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 369.405889] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 369.405891] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 369.406014] cfg80211: Calling CRDA for country: CA
[ 369.407613] cfg80211: Regulatory domain changed to country: CA
[ 369.407616] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 369.407619] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2700 mBm)
[ 369.407621] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 1700 mBm)
[ 369.407623] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 369.407625] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 369.407627] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 3000 mBm)
[ 371.731744] EXT4-fs (sda6): re-mounted. Opts: user_xattr,commit=0
[ 372.488279] PM: Syncing filesystems ... done.
[ 372.489375] PM: Preparing system for mem sleep
[ 372.564163] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 372.577275] Freezing remaining freezable tasks ... (elapsed 0.01
seconds) done.
[ 372.590611] PM: Entering mem sleep
[ 372.590679] Suspending console(s) (use no_console_suspend to debug)
[ 372.591562] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 372.665867] sd 0:0:0:0: [sda] Stopping disk
[ 373.066866] PM: suspend of devices complete after 476.357 msecs
[ 373.067057] r8169 0000:05:00.0: wake-up capability enabled by ACPI
[ 373.080184] xhci_hcd 0000:04:00.0: wake-up capability enabled by ACPI
[ 373.106870] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 373.120272] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 373.146778] PM: late suspend of devices complete after 79.995 msecs
[ 373.147102] ACPI: Preparing to enter system sleep state S3
[ 373.340070] PM: Saving platform NVS memory
[ 373.341546] Disabling non-boot CPUs ...
[ 373.343704] CPU 1 is now offline
[ 373.446348] CPU 2 is now offline
[ 373.448352] CPU 3 is now offline
[ 373.450654] CPU 4 is now offline
[ 373.552894] CPU 5 is now offline
[ 373.656106] CPU 6 is now offline
[ 373.657742] CPU 7 is now offline
[ 373.657974] Extended CMOS year: 2000
[ 373.658347] ACPI: Low-level resume complete
[ 373.658391] PM: Restoring platform NVS memory
[ 373.658795] Extended CMOS year: 2000
[ 373.658818] Enabling non-boot CPUs ...
[ 373.658902] Booting Node 0 Processor 1 APIC 0x2
[ 373.658904] smpboot cpu 1: start_ip = 99000
[ 373.670044] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.690386] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.690509] CPU1 is up
[ 373.690861] Booting Node 0 Processor 2 APIC 0x4
[ 373.690863] smpboot cpu 2: start_ip = 99000
[ 373.701999] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.722383] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.722585] CPU2 is up
[ 373.722955] Booting Node 0 Processor 3 APIC 0x6
[ 373.722957] smpboot cpu 3: start_ip = 99000
[ 373.734093] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.754545] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.754777] CPU3 is up
[ 373.755142] Booting Node 0 Processor 4 APIC 0x1
[ 373.755144] smpboot cpu 4: start_ip = 99000
[ 373.766279] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.786723] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.786910] CPU4 is up
[ 373.787280] Booting Node 0 Processor 5 APIC 0x3
[ 373.787282] smpboot cpu 5: start_ip = 99000
[ 373.798418] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.819008] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.819222] CPU5 is up
[ 373.819584] Booting Node 0 Processor 6 APIC 0x5
[ 373.819586] smpboot cpu 6: start_ip = 99000
[ 373.830621] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.851273] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.851474] CPU6 is up
[ 373.851848] Booting Node 0 Processor 7 APIC 0x7
[ 373.851850] smpboot cpu 7: start_ip = 99000
[ 373.862985] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.883756] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.883991] CPU7 is up
[ 373.891785] ACPI: Waking up from system sleep state S3
[ 374.729481] power_supply BAT0: parent PNP0C0A:00 should not be sleeping
[ 374.859815] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 374.860133] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 374.860443] xhci_hcd 0000:04:00.0: wake-up capability disabled by ACPI
[ 374.860714] PM: early resume of devices complete after 1.101 msecs
[ 374.860806] i915 0000:00:02.0: setting latency timer to 64
[ 374.860853] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 374.860925] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[ 374.860946] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 374.860956] ahci 0000:00:1f.2: setting latency timer to 64
[ 374.860966] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 374.860990] r8169 0000:05:00.0: wake-up capability disabled by ACPI
[ 374.861026] usb usb2: root hub lost power or was reset
[ 374.861028] usb usb4: root hub lost power or was reset
[ 375.168783] usb 1-1.1: reset full-speed USB device number 6 using ehci_hcd
[ 375.185288] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 375.187053] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 375.187063] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 375.189720] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 375.189730] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 375.190353] ata3.00: configured for UDMA/100
[ 375.252053] usb 1-1.1: device firmware changed
[ 376.623683] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 376.624603] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 376.624869] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 376.624879] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 376.626710] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 376.626901] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 376.626908] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 376.627738] ata1.00: configured for UDMA/133
[ 376.640442] sd 0:0:0:0: [sda] Starting disk
[ 376.664962] PM: resume of devices complete after 1806.201 msecs
[ 376.665192] PM: Finishing wakeup.
[ 376.665194] Restarting tasks ...
[ 376.665590] usb 1-1.1: USB disconnect, device number 6
[ 376.668280] done.
[ 376.670324] video LNXVIDEO:00: Restoring backlight state
[ 376.670620] video LNXVIDEO:01: Restoring backlight state
[ 376.733756] usb 1-1.1: new full-speed USB device number 7 using ehci_hcd
[ 377.163777] usb 1-1.1: USB disconnect, device number 7
[ 377.606044] usb 1-1.1: new full-speed USB device number 8 using ehci_hcd
[ 378.303702] EXT4-fs (sda6): re-mounted. Opts: user_xattr,commit=0
[ 378.352672] delay: estimated 89, actual 0
[ 378.376651] delay: estimated 90, actual 1
[ 378.383106] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 378.525263] r8169 0000:05:00.0: eth0: link down
[ 378.525835] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 381.363952] wlan0: authenticate with 00:26:44:68:e0:6f (try 1)
[ 381.366409] wlan0: authenticated
[ 381.378693] wlan0: associate with 00:26:44:68:e0:6f (try 1)
[ 381.381696] wlan0: RX AssocResp from 00:26:44:68:e0:6f (capab=0x411
status=0 aid=2)
[ 381.381699] wlan0: associated
[ 381.381703] wlan0: moving STA 00:26:44:68:e0:6f to state 1
[ 381.381704] wlan0: moving STA 00:26:44:68:e0:6f to state 2
[ 381.382379] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 381.389476] wlan0: moving STA 00:26:44:68:e0:6f to state 3
[ 392.289757] wlan0: no IPv6 routers present
> - Felix
WARNING: multiple messages have this Message-ID (diff)
From: Sergio Correia <lists@uece.net>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] 3.4-rc ath9k regression (Re: 3.3.1 ath9k regression)
Date: Thu, 12 Apr 2012 15:28:56 -0400 [thread overview]
Message-ID: <CAJyhjX3W6LiTihWC5bRx6ShpKA8JUCSdJ+ry2gDE+=rpF5MytQ@mail.gmail.com> (raw)
In-Reply-To: <4F871AB8.3070302@openwrt.org>
Hello Felix,
On Thu, Apr 12, 2012 at 2:11 PM, Felix Fietkau <nbd@openwrt.org> wrote:
> On 2012-04-12 5:35 PM, Michael Leun wrote:
>> On Thu, 12 Apr 2012 16:58:34 +0300
>> Felipe Contreras <felipe.contreras@gmail.com> wrote:
>>
>>> On Thu, Apr 12, 2012 at 4:46 PM, Felix Fietkau <nbd@openwrt.org>
>>> wrote:
>>> > On 2012-04-09 5:29 PM, Michael Leun wrote:
>>> >> On Mon, 9 Apr 2012 19:52:45 +0530
>>>
>>> >> Seems obvious to me, that this line
>>> >>
>>> >> if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
>>> >>
>>> >> makes the real difference.
>>> > Please try this patch with plain 3.3.1 or 3.4-rc2 to see if it fixes
>>> > this issue:
>>>
>>> Nope, not here (3.3.1).
>>
>> Also negative for 3.4-rc2, but that SLEEP<>AWAKE noise at the end
>> stopped. Still need "iwconfig wlan0 essid <myssid>" to make it ping
>> again (that not included in log below).
> OK, so my fix is definitely worth submitting, since it gets rid of some
> unnecessary sleep mode transitions. About the iwconfig command: are you
> not using wpa_supplicant?
>
>> Due to Felipes result and 3.4-rc2 didn't repeat my test with 3.3.1, if
>> you think it would add useful information I could.
> Maybe it would be useful to get some more detailed logs from that.
>
your patch seems to work for me, with 3.3.1:
this is the log after I disable/re-enable the interface:
[ 216.202405] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 219.054925] wlan0: authenticate with 00:26:44:68:e0:6f (try 1)
[ 219.057190] wlan0: authenticated
[ 219.069573] wlan0: associate with 00:26:44:68:e0:6f (try 1)
[ 219.074450] wlan0: RX AssocResp from 00:26:44:68:e0:6f (capab=0x411
status=0 aid=2)
[ 219.074454] wlan0: associated
[ 219.074456] wlan0: moving STA 00:26:44:68:e0:6f to state 1
[ 219.074458] wlan0: moving STA 00:26:44:68:e0:6f to state 2
[ 219.075217] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 219.081856] wlan0: moving STA 00:26:44:68:e0:6f to state 3
[ 229.108248] wlan0: no IPv6 routers present
and here, after a suspend/resume cycle (whole log):
[ 369.398982] wlan0: deauthenticating from 00:26:44:68:e0:6f by local
choice (reason=3)
[ 369.399147] wlan0: moving STA 00:26:44:68:e0:6f to state 2
[ 369.399150] wlan0: moving STA 00:26:44:68:e0:6f to state 1
[ 369.399152] wlan0: moving STA 00:26:44:68:e0:6f to state 0
[ 369.401292] cfg80211: Calling CRDA to update world regulatory domain
[ 369.405877] cfg80211: World regulatory domain updated:
[ 369.405880] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 369.405883] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 369.405885] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 369.405887] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 369.405889] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 369.405891] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 369.406014] cfg80211: Calling CRDA for country: CA
[ 369.407613] cfg80211: Regulatory domain changed to country: CA
[ 369.407616] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 369.407619] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2700 mBm)
[ 369.407621] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 1700 mBm)
[ 369.407623] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 369.407625] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 369.407627] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 3000 mBm)
[ 371.731744] EXT4-fs (sda6): re-mounted. Opts: user_xattr,commit=0
[ 372.488279] PM: Syncing filesystems ... done.
[ 372.489375] PM: Preparing system for mem sleep
[ 372.564163] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 372.577275] Freezing remaining freezable tasks ... (elapsed 0.01
seconds) done.
[ 372.590611] PM: Entering mem sleep
[ 372.590679] Suspending console(s) (use no_console_suspend to debug)
[ 372.591562] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 372.665867] sd 0:0:0:0: [sda] Stopping disk
[ 373.066866] PM: suspend of devices complete after 476.357 msecs
[ 373.067057] r8169 0000:05:00.0: wake-up capability enabled by ACPI
[ 373.080184] xhci_hcd 0000:04:00.0: wake-up capability enabled by ACPI
[ 373.106870] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 373.120272] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 373.146778] PM: late suspend of devices complete after 79.995 msecs
[ 373.147102] ACPI: Preparing to enter system sleep state S3
[ 373.340070] PM: Saving platform NVS memory
[ 373.341546] Disabling non-boot CPUs ...
[ 373.343704] CPU 1 is now offline
[ 373.446348] CPU 2 is now offline
[ 373.448352] CPU 3 is now offline
[ 373.450654] CPU 4 is now offline
[ 373.552894] CPU 5 is now offline
[ 373.656106] CPU 6 is now offline
[ 373.657742] CPU 7 is now offline
[ 373.657974] Extended CMOS year: 2000
[ 373.658347] ACPI: Low-level resume complete
[ 373.658391] PM: Restoring platform NVS memory
[ 373.658795] Extended CMOS year: 2000
[ 373.658818] Enabling non-boot CPUs ...
[ 373.658902] Booting Node 0 Processor 1 APIC 0x2
[ 373.658904] smpboot cpu 1: start_ip = 99000
[ 373.670044] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.690386] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.690509] CPU1 is up
[ 373.690861] Booting Node 0 Processor 2 APIC 0x4
[ 373.690863] smpboot cpu 2: start_ip = 99000
[ 373.701999] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.722383] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.722585] CPU2 is up
[ 373.722955] Booting Node 0 Processor 3 APIC 0x6
[ 373.722957] smpboot cpu 3: start_ip = 99000
[ 373.734093] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.754545] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.754777] CPU3 is up
[ 373.755142] Booting Node 0 Processor 4 APIC 0x1
[ 373.755144] smpboot cpu 4: start_ip = 99000
[ 373.766279] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.786723] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.786910] CPU4 is up
[ 373.787280] Booting Node 0 Processor 5 APIC 0x3
[ 373.787282] smpboot cpu 5: start_ip = 99000
[ 373.798418] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.819008] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.819222] CPU5 is up
[ 373.819584] Booting Node 0 Processor 6 APIC 0x5
[ 373.819586] smpboot cpu 6: start_ip = 99000
[ 373.830621] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.851273] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.851474] CPU6 is up
[ 373.851848] Booting Node 0 Processor 7 APIC 0x7
[ 373.851850] smpboot cpu 7: start_ip = 99000
[ 373.862985] Calibrating delay loop (skipped) already calibrated this CPU
[ 373.883756] NMI watchdog enabled, takes one hw-pmu counter.
[ 373.883991] CPU7 is up
[ 373.891785] ACPI: Waking up from system sleep state S3
[ 374.729481] power_supply BAT0: parent PNP0C0A:00 should not be sleeping
[ 374.859815] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 374.860133] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 374.860443] xhci_hcd 0000:04:00.0: wake-up capability disabled by ACPI
[ 374.860714] PM: early resume of devices complete after 1.101 msecs
[ 374.860806] i915 0000:00:02.0: setting latency timer to 64
[ 374.860853] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 374.860925] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[ 374.860946] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 374.860956] ahci 0000:00:1f.2: setting latency timer to 64
[ 374.860966] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 374.860990] r8169 0000:05:00.0: wake-up capability disabled by ACPI
[ 374.861026] usb usb2: root hub lost power or was reset
[ 374.861028] usb usb4: root hub lost power or was reset
[ 375.168783] usb 1-1.1: reset full-speed USB device number 6 using ehci_hcd
[ 375.185288] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 375.187053] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 375.187063] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 375.189720] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 375.189730] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 375.190353] ata3.00: configured for UDMA/100
[ 375.252053] usb 1-1.1: device firmware changed
[ 376.623683] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 376.624603] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 376.624869] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 376.624879] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 376.626710] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 376.626901] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 376.626908] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 376.627738] ata1.00: configured for UDMA/133
[ 376.640442] sd 0:0:0:0: [sda] Starting disk
[ 376.664962] PM: resume of devices complete after 1806.201 msecs
[ 376.665192] PM: Finishing wakeup.
[ 376.665194] Restarting tasks ...
[ 376.665590] usb 1-1.1: USB disconnect, device number 6
[ 376.668280] done.
[ 376.670324] video LNXVIDEO:00: Restoring backlight state
[ 376.670620] video LNXVIDEO:01: Restoring backlight state
[ 376.733756] usb 1-1.1: new full-speed USB device number 7 using ehci_hcd
[ 377.163777] usb 1-1.1: USB disconnect, device number 7
[ 377.606044] usb 1-1.1: new full-speed USB device number 8 using ehci_hcd
[ 378.303702] EXT4-fs (sda6): re-mounted. Opts: user_xattr,commit=0
[ 378.352672] delay: estimated 89, actual 0
[ 378.376651] delay: estimated 90, actual 1
[ 378.383106] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 378.525263] r8169 0000:05:00.0: eth0: link down
[ 378.525835] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 381.363952] wlan0: authenticate with 00:26:44:68:e0:6f (try 1)
[ 381.366409] wlan0: authenticated
[ 381.378693] wlan0: associate with 00:26:44:68:e0:6f (try 1)
[ 381.381696] wlan0: RX AssocResp from 00:26:44:68:e0:6f (capab=0x411
status=0 aid=2)
[ 381.381699] wlan0: associated
[ 381.381703] wlan0: moving STA 00:26:44:68:e0:6f to state 1
[ 381.381704] wlan0: moving STA 00:26:44:68:e0:6f to state 2
[ 381.382379] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 381.389476] wlan0: moving STA 00:26:44:68:e0:6f to state 3
[ 392.289757] wlan0: no IPv6 routers present
> - Felix
next prev parent reply other threads:[~2012-04-12 19:29 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-03 5:46 3.3.1 ath9k regression Kelly Anderson
2012-04-03 6:01 ` Ben Greear
2012-04-03 6:01 ` [ath9k-devel] " Ben Greear
2012-04-03 6:26 ` Mohammed Shafi
2012-04-03 6:26 ` Mohammed Shafi
2012-04-03 6:49 ` Kelly Anderson
2012-04-03 6:49 ` Kelly Anderson
2012-04-03 7:16 ` Mohammed Shafi
2012-04-03 7:16 ` Mohammed Shafi
2012-04-03 7:46 ` Kelly Anderson
2012-04-03 7:46 ` Kelly Anderson
2012-04-03 7:52 ` Mohammed Shafi
2012-04-03 7:52 ` Mohammed Shafi
2012-04-03 8:04 ` Mohammed Shafi
2012-04-03 8:04 ` Mohammed Shafi
2012-04-03 8:38 ` Kelly Anderson
2012-04-03 8:38 ` Kelly Anderson
2012-04-03 18:03 ` Michael Leun
2012-04-03 18:03 ` Michael Leun
2012-04-04 7:29 ` Mohammed Shafi
2012-04-04 7:29 ` Mohammed Shafi
2012-04-04 15:03 ` Mohammed Shafi
2012-04-04 15:03 ` Mohammed Shafi
2012-04-04 21:51 ` Michael Leun
2012-04-04 21:51 ` Michael Leun
2012-04-05 6:16 ` Mohammed Shafi
2012-04-05 6:16 ` Mohammed Shafi
2012-04-05 13:53 ` Michael Leun
2012-04-05 13:53 ` Michael Leun
2012-04-05 18:25 ` Ben Greear
2012-04-05 18:25 ` Ben Greear
2012-04-06 5:11 ` Mohammed Shafi
2012-04-06 5:11 ` Mohammed Shafi
2012-04-06 20:31 ` Ben Greear
2012-04-06 20:31 ` Ben Greear
2012-04-08 23:08 ` 3.4-rc ath9k regression (Re: [ath9k-devel] 3.3.1 ath9k regression) Michael Leun
2012-04-08 23:08 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-09 6:28 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Mohammed Shafi
2012-04-09 6:28 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Mohammed Shafi
2012-04-09 8:45 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Sergio Correia
2012-04-09 8:45 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Sergio Correia
2012-04-09 10:25 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Michael Leun
2012-04-09 10:25 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-09 14:03 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Michael Leun
2012-04-09 14:03 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-09 14:22 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Mohammed Shafi
2012-04-09 14:22 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Mohammed Shafi
2012-04-09 15:29 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Michael Leun
2012-04-09 15:29 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-10 5:48 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Mohammed Shafi
2012-04-10 5:48 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Mohammed Shafi
2012-04-10 5:55 ` Peter Stuge
2012-04-10 10:05 ` Mohammed Shafi
2012-04-10 10:05 ` Mohammed Shafi
2012-04-12 13:46 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Felix Fietkau
2012-04-12 13:46 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Felix Fietkau
2012-04-12 13:58 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Felipe Contreras
2012-04-12 13:58 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Felipe Contreras
2012-04-12 15:35 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Michael Leun
2012-04-12 15:35 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-12 18:11 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Felix Fietkau
2012-04-12 18:11 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Felix Fietkau
2012-04-12 19:28 ` Sergio Correia [this message]
2012-04-12 19:28 ` Sergio Correia
2012-04-14 21:15 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Felipe Contreras
2012-04-14 21:15 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Felipe Contreras
2012-04-12 22:01 ` 3.4-rc ath9k regression (Re: [ath9k-devel] " Michael Leun
2012-04-12 22:01 ` [ath9k-devel] 3.4-rc ath9k regression (Re: " Michael Leun
2012-04-09 19:12 ` Sujith Manoharan
2012-04-09 19:12 ` Sujith Manoharan
2012-04-09 21:21 ` Michael Leun
2012-04-09 21:21 ` Michael Leun
2012-04-09 6:52 ` [ath9k-devel] 3.3.1 ath9k regression Mohammed Shafi
2012-04-09 6:52 ` Mohammed Shafi
2012-04-04 10:40 ` Mantas M.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJyhjX3W6LiTihWC5bRx6ShpKA8JUCSdJ+ry2gDE+=rpF5MytQ@mail.gmail.com' \
--to=lists@uece.net \
--cc=ath9k-devel@venema.h4ckr.net \
--cc=casteyde.christian@free.fr \
--cc=felipe.contreras@gmail.com \
--cc=greearb@candelatech.com \
--cc=kelly@silka.with-linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lkml20120218@newton.leun.net \
--cc=ml@elektra.leun.net \
--cc=nbd@openwrt.org \
--cc=shafi.wireless@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.