* [PATCH v11 0/5] m68k: Add Virtual M68k Machine
@ 2022-01-20 8:03 Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 1/5] m68k: add asm/config.h Laurent Vivier
` (4 more replies)
0 siblings, 5 replies; 14+ messages in thread
From: Laurent Vivier @ 2022-01-20 8:03 UTC (permalink / raw)
To: linux-kernel
Cc: Alessandro Zummo, linux-rtc, John Stultz, Arnd Bergmann,
Daniel Lezcano, Jiaxun Yang, Alexandre Belloni, linux-m68k,
Thomas Gleixner, Stephen Boyd, Geert Uytterhoeven,
Laurent Vivier
The most powerful m68k machine emulated by QEMU is a Quadra 800,
but this machine is very limited: only 1 GiB of memory and only some
specific interfaces, with no DMA.
The Virtual M68k Machine is based on Goldfish interfaces defined by Google
for Android simulator. It uses Goldfish-rtc (timer and RTC),
Goldfish-pic (PIC) and Goldfish-tty (for early tty).
The machine is created with 128 virtio-mmio buses, and they can
be used to add serial console, GPU, disk, NIC, HID, hwrng, 9PFS...
The virtual m68k machine has been merged in QEMU and will be available
with the release 6.0.
This series introduces the support of this new machine in the linux kernel.
If you want to try:
- Configure and build latest QEMU with (or download qemu 6.0 binary):
.../configure --target-list=m68k-softmmu --enable-virglrenderer
make
- Configure and build linux with:
make virt_defconfig
make vmlinux
A pre-installed qcow2 disk image is available at:
http://vivier.eu/debian-10.0.qcow2
You can run the machine with something like:
qemu-system-m68k -M virt \
-m 3G \
-chardev stdio,signal=off,mux=on,id=char0 \
-mon chardev=char0,mode=readline \
-kernel vmlinux \
-append "console=hvc0 root=/dev/vda2" \
-blockdev node-name=system,driver=file,filename=debian-10.0.qcow2 \
-blockdev node-name=drive0,driver=qcow2,file=system \
-device virtio-blk-device,drive=drive0 \
-serial chardev:char0 \
-device virtio-net-device,netdev=hostnet0 \
-netdev bridge,id=hostnet0,br=virbr0,helper=/usr/libexec/qemu-bridge-helper \
-device virtio-serial-device \
-device virtio-gpu-device \
-device virtconsole,chardev=char0 \
-device virtio-keyboard-device \
-device virtio-mouse-device
You can watch a presentation about the machine on the Planet m68k channel:
https://youtu.be/s_ve0bCC9q4
[Demo at 38:00]
v11:
- rename goldfish_ioread32()/goldfish_iowrite32() to gf_ioread32()/gfiowrite32()
- move them to linux/goldfish.h and m68k/asm/io.h
- change patches order (tty first to revert my previous work)
- fix clocksource by clearing interrupt on tick not on next_event()
and clearing shift
- add missing clocksource_register_hz()
- rebase
v10:
- move goldfish_ioread32()/goldfish_iowrite32() to io.h
- also update goldfish-tty
- use READ_ONCE()/WRITE_ONCE() for in_nmi
v9:
- include <linux/memblock.h> to declare min_low_pfn
- goldfish accessors: s/CONFIG_CPU_BIG_ENDIAN/CONFIG_M68K/
v8:
- GF_PUT_CHAR is a 32bit register (in arch/m68k/kernel/head.S)
- rework goldfish-pic and virt_ctrl
v7:
- add "#include <linux/slab.h>" in timer-goldfish.c for kzalloc()
- update timer-goldfish Kconfig
- remove EXPORT_SYMBOL()
- introduce goldfish_ioread32()/goldfish_iowrite32()
v6:
- fix goldfish-rtc endianness
- move goldfish-timer code to drivers/clocksource
- remove LEGACY_TIMER_TICK and use directly goldfish-timer
v5:
- add GENERIC_CLOCKEVENTS in Kconfig.machine
v4:
- update PATCH 1: comments and parameter names
- add a patch to move to generic clockevents
(I prefer to have a separate patch as it can be used as an example to
move from legacy timer tick to generic clockevents)
v3:
- introduce config.h to export prototypes to arch/m68k/kernel/setup_mm.c
- define virt_nmi_handler as static
v2:
- Remove VIRTO_MENU set y
- sort the selects
- add CONFIG_LOCALVERSION="-virt"
- generate virt_defconfig using "make savedefconfig"
- rename MACH_VIRTONLY to MACH_VIRT_ONLY
- add a test_notvirt label in head.S
- rework iounmap() to use two separate #ifdefs
- use %u in virt_get_model()
- drop show_registers() in config.c
- drop pr_err() from config_virt()
- sort includes in ints.c
- call virt_irq_enable() in virt_irq_startup()
- drop virt_irq_shutdown() and use virt_irq_disable()
- move in_nmi into virt_nmi_handler()
- use pr_warn() in virt_nmi_handler()
- rework goldfish_pic_irq() IRQ scan
- copy goldfish-pic IRQs related information from QEMU hw/m68k/virt
- add a comment to "min_low_pfn = 0"
- use platform_device_register_simple()
- use goldfish_timer_read(), upper_32_bits() and lower_32_bits()
Thanks,
Laurent
Laurent Vivier (5):
m68k: add asm/config.h
tty: goldfish: introduce gf_ioread32()/gf_iowrite32()
rtc: goldfish: use gf_ioread32()/gf_iowrite32()
clocksource/drivers: Add a goldfish-timer clocksource
m68k: introduce a virtual m68k machine
arch/m68k/Kbuild | 1 +
arch/m68k/Kconfig.machine | 17 +++
arch/m68k/amiga/config.c | 1 +
arch/m68k/apollo/config.c | 1 +
arch/m68k/atari/config.c | 1 +
arch/m68k/bvme6000/config.c | 1 +
arch/m68k/configs/virt_defconfig | 65 +++++++++
arch/m68k/hp300/config.c | 1 +
arch/m68k/include/asm/config.h | 35 +++++
arch/m68k/include/asm/io.h | 3 +
arch/m68k/include/asm/irq.h | 3 +-
arch/m68k/include/asm/pgtable_mm.h | 7 +
arch/m68k/include/asm/setup.h | 44 ++++--
arch/m68k/include/asm/virt.h | 25 ++++
arch/m68k/include/uapi/asm/bootinfo-virt.h | 18 +++
arch/m68k/include/uapi/asm/bootinfo.h | 1 +
arch/m68k/kernel/Makefile | 1 +
arch/m68k/kernel/head.S | 31 ++++
arch/m68k/kernel/setup_mm.c | 30 +---
arch/m68k/mac/config.c | 1 +
arch/m68k/mm/kmap.c | 23 ++-
arch/m68k/mvme147/config.c | 1 +
arch/m68k/mvme16x/config.c | 1 +
arch/m68k/q40/config.c | 1 +
arch/m68k/virt/Makefile | 6 +
arch/m68k/virt/config.c | 119 +++++++++++++++
arch/m68k/virt/ints.c | 133 +++++++++++++++++
arch/m68k/virt/platform.c | 72 +++++++++
drivers/clocksource/Kconfig | 7 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-goldfish.c | 162 +++++++++++++++++++++
drivers/rtc/rtc-goldfish.c | 30 ++--
drivers/tty/goldfish.c | 20 +--
include/clocksource/timer-goldfish.h | 11 ++
include/linux/goldfish.h | 15 +-
35 files changed, 820 insertions(+), 69 deletions(-)
create mode 100644 arch/m68k/configs/virt_defconfig
create mode 100644 arch/m68k/include/asm/config.h
create mode 100644 arch/m68k/include/asm/virt.h
create mode 100644 arch/m68k/include/uapi/asm/bootinfo-virt.h
create mode 100644 arch/m68k/virt/Makefile
create mode 100644 arch/m68k/virt/config.c
create mode 100644 arch/m68k/virt/ints.c
create mode 100644 arch/m68k/virt/platform.c
create mode 100644 drivers/clocksource/timer-goldfish.c
create mode 100644 include/clocksource/timer-goldfish.h
--
2.34.1
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v11 1/5] m68k: add asm/config.h
2022-01-20 8:03 [PATCH v11 0/5] m68k: Add Virtual M68k Machine Laurent Vivier
@ 2022-01-20 8:03 ` Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 2/5] tty: goldfish: introduce gf_ioread32()/gf_iowrite32() Laurent Vivier
` (3 subsequent siblings)
4 siblings, 0 replies; 14+ messages in thread
From: Laurent Vivier @ 2022-01-20 8:03 UTC (permalink / raw)
To: linux-kernel
Cc: Alessandro Zummo, linux-rtc, John Stultz, Arnd Bergmann,
Daniel Lezcano, Jiaxun Yang, Alexandre Belloni, linux-m68k,
Thomas Gleixner, Stephen Boyd, Geert Uytterhoeven,
Laurent Vivier
To avoid 'warning: no previous prototype for' error, declare all
the parse_bootinfo and config functions prototypes into asm/config.h
and include it in arch/m68k/kernel/setup_mm.c and arch/m68k/*/config.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
arch/m68k/amiga/config.c | 1 +
arch/m68k/apollo/config.c | 1 +
arch/m68k/atari/config.c | 1 +
arch/m68k/bvme6000/config.c | 1 +
arch/m68k/hp300/config.c | 1 +
arch/m68k/include/asm/config.h | 33 +++++++++++++++++++++++++++++++++
arch/m68k/kernel/setup_mm.c | 23 +----------------------
arch/m68k/mac/config.c | 1 +
arch/m68k/mvme147/config.c | 1 +
arch/m68k/mvme16x/config.c | 1 +
arch/m68k/q40/config.c | 1 +
11 files changed, 43 insertions(+), 22 deletions(-)
create mode 100644 arch/m68k/include/asm/config.h
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index be2dfab48fd4..3137b45750df 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -37,6 +37,7 @@
#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/io.h>
+#include <asm/config.h>
static unsigned long amiga_model;
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 581a5f68d102..42a8b8e2b664 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -16,6 +16,7 @@
#include <asm/apollohw.h>
#include <asm/irq.h>
#include <asm/machdep.h>
+#include <asm/config.h>
u_long sio01_physaddr;
u_long sio23_physaddr;
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 261a0f57cc9a..38a7c0578105 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -46,6 +46,7 @@
#include <asm/machdep.h>
#include <asm/hwtest.h>
#include <asm/io.h>
+#include <asm/config.h>
u_long atari_mch_cookie;
EXPORT_SYMBOL(atari_mch_cookie);
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 0c6feafbbd11..9b060d466e03 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -36,6 +36,7 @@
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/bvme6000hw.h>
+#include <asm/config.h>
static void bvme6000_get_model(char *model);
extern void bvme6000_sched_init(void);
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index ce1eb3d3d55d..2c92843397c3 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -22,6 +22,7 @@
#include <asm/blinken.h>
#include <asm/io.h> /* readb() and writeb() */
#include <asm/hp300hw.h>
+#include <asm/config.h>
#include "time.h"
diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h
new file mode 100644
index 000000000000..aae61070628b
--- /dev/null
+++ b/arch/m68k/include/asm/config.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * This file contains prototypes provided by each m68k machine
+ * to parse bootinfo data structures and to configure the machine
+ */
+
+#ifndef _M68K_CONFIG_H
+#define _M68K_CONFIG_H
+
+extern int amiga_parse_bootinfo(const struct bi_record *record);
+extern int atari_parse_bootinfo(const struct bi_record *record);
+extern int mac_parse_bootinfo(const struct bi_record *record);
+extern int q40_parse_bootinfo(const struct bi_record *record);
+extern int bvme6000_parse_bootinfo(const struct bi_record *record);
+extern int mvme16x_parse_bootinfo(const struct bi_record *record);
+extern int mvme147_parse_bootinfo(const struct bi_record *record);
+extern int hp300_parse_bootinfo(const struct bi_record *record);
+extern int apollo_parse_bootinfo(const struct bi_record *record);
+
+extern void config_amiga(void);
+extern void config_atari(void);
+extern void config_mac(void);
+extern void config_sun3(void);
+extern void config_apollo(void);
+extern void config_mvme147(void);
+extern void config_mvme16x(void);
+extern void config_bvme6000(void);
+extern void config_hp300(void);
+extern void config_q40(void);
+extern void config_sun3x(void);
+
+#endif /* _M68K_CONFIG_H */
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 49e573b94326..8228275aae3e 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -47,6 +47,7 @@
#endif
#include <asm/macintosh.h>
#include <asm/natfeat.h>
+#include <asm/config.h>
#if !FPSTATESIZE || !NR_IRQS
#warning No CPU/platform type selected, your kernel will not work!
@@ -113,28 +114,6 @@ EXPORT_SYMBOL(isa_type);
EXPORT_SYMBOL(isa_sex);
#endif
-extern int amiga_parse_bootinfo(const struct bi_record *);
-extern int atari_parse_bootinfo(const struct bi_record *);
-extern int mac_parse_bootinfo(const struct bi_record *);
-extern int q40_parse_bootinfo(const struct bi_record *);
-extern int bvme6000_parse_bootinfo(const struct bi_record *);
-extern int mvme16x_parse_bootinfo(const struct bi_record *);
-extern int mvme147_parse_bootinfo(const struct bi_record *);
-extern int hp300_parse_bootinfo(const struct bi_record *);
-extern int apollo_parse_bootinfo(const struct bi_record *);
-
-extern void config_amiga(void);
-extern void config_atari(void);
-extern void config_mac(void);
-extern void config_sun3(void);
-extern void config_apollo(void);
-extern void config_mvme147(void);
-extern void config_mvme16x(void);
-extern void config_bvme6000(void);
-extern void config_hp300(void);
-extern void config_q40(void);
-extern void config_sun3x(void);
-
#define MASK_256K 0xfffc0000
extern void paging_init(void);
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 5d16f9b47aa9..65d124ec80bb 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -47,6 +47,7 @@
#include <asm/mac_via.h>
#include <asm/mac_oss.h>
#include <asm/mac_psc.h>
+#include <asm/config.h>
/* Mac bootinfo struct */
struct mac_booter_data mac_bi_data;
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index dfd6202fd403..b96ea7c76a19 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -34,6 +34,7 @@
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/mvme147hw.h>
+#include <asm/config.h>
static void mvme147_get_model(char *model);
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index b4422c2dfbbf..88cbdc10925b 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -37,6 +37,7 @@
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/mvme16xhw.h>
+#include <asm/config.h>
extern t_bdid mvme_bdid;
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 5caf1e5be1c2..9237243077ce 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -34,6 +34,7 @@
#include <asm/traps.h>
#include <asm/machdep.h>
#include <asm/q40_master.h>
+#include <asm/config.h>
extern void q40_init_IRQ(void);
static void q40_get_model(char *model);
--
2.34.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v11 2/5] tty: goldfish: introduce gf_ioread32()/gf_iowrite32()
2022-01-20 8:03 [PATCH v11 0/5] m68k: Add Virtual M68k Machine Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 1/5] m68k: add asm/config.h Laurent Vivier
@ 2022-01-20 8:03 ` Laurent Vivier
2022-01-20 8:50 ` Arnd Bergmann
2022-01-20 8:03 ` [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32() Laurent Vivier
` (2 subsequent siblings)
4 siblings, 1 reply; 14+ messages in thread
From: Laurent Vivier @ 2022-01-20 8:03 UTC (permalink / raw)
To: linux-kernel
Cc: Alessandro Zummo, linux-rtc, John Stultz, Arnd Bergmann,
Daniel Lezcano, Jiaxun Yang, Alexandre Belloni, linux-m68k,
Thomas Gleixner, Stephen Boyd, Geert Uytterhoeven,
Laurent Vivier
Revert
commit da31de35cd2f ("tty: goldfish: use __raw_writel()/__raw_readl()")
to use accessors defined by the architecture.
Define by default the accessor to be little-endian as we
have only little-endian architectures using goldfish devices.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
drivers/tty/goldfish.c | 20 ++++++++++----------
include/linux/goldfish.h | 15 +++++++++++----
2 files changed, 21 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index 5ed19a9857ad..10c13b93ed52 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -61,13 +61,13 @@ static void do_rw_io(struct goldfish_tty *qtty,
spin_lock_irqsave(&qtty->lock, irq_flags);
gf_write_ptr((void *)address, base + GOLDFISH_TTY_REG_DATA_PTR,
base + GOLDFISH_TTY_REG_DATA_PTR_HIGH);
- __raw_writel(count, base + GOLDFISH_TTY_REG_DATA_LEN);
+ gf_iowrite32(count, base + GOLDFISH_TTY_REG_DATA_LEN);
if (is_write)
- __raw_writel(GOLDFISH_TTY_CMD_WRITE_BUFFER,
+ gf_iowrite32(GOLDFISH_TTY_CMD_WRITE_BUFFER,
base + GOLDFISH_TTY_REG_CMD);
else
- __raw_writel(GOLDFISH_TTY_CMD_READ_BUFFER,
+ gf_iowrite32(GOLDFISH_TTY_CMD_READ_BUFFER,
base + GOLDFISH_TTY_REG_CMD);
spin_unlock_irqrestore(&qtty->lock, irq_flags);
@@ -142,7 +142,7 @@ static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id)
unsigned char *buf;
u32 count;
- count = __raw_readl(base + GOLDFISH_TTY_REG_BYTES_READY);
+ count = gf_ioread32(base + GOLDFISH_TTY_REG_BYTES_READY);
if (count == 0)
return IRQ_NONE;
@@ -159,7 +159,7 @@ static int goldfish_tty_activate(struct tty_port *port, struct tty_struct *tty)
{
struct goldfish_tty *qtty = container_of(port, struct goldfish_tty,
port);
- __raw_writel(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
+ gf_iowrite32(GOLDFISH_TTY_CMD_INT_ENABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
return 0;
}
@@ -167,7 +167,7 @@ static void goldfish_tty_shutdown(struct tty_port *port)
{
struct goldfish_tty *qtty = container_of(port, struct goldfish_tty,
port);
- __raw_writel(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
+ gf_iowrite32(GOLDFISH_TTY_CMD_INT_DISABLE, qtty->base + GOLDFISH_TTY_REG_CMD);
}
static int goldfish_tty_open(struct tty_struct *tty, struct file *filp)
@@ -202,7 +202,7 @@ static unsigned int goldfish_tty_chars_in_buffer(struct tty_struct *tty)
{
struct goldfish_tty *qtty = &goldfish_ttys[tty->index];
void __iomem *base = qtty->base;
- return __raw_readl(base + GOLDFISH_TTY_REG_BYTES_READY);
+ return gf_ioread32(base + GOLDFISH_TTY_REG_BYTES_READY);
}
static void goldfish_tty_console_write(struct console *co, const char *b,
@@ -355,7 +355,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
* on Ranchu emulator (qemu2) returns 1 here and
* driver will use physical addresses.
*/
- qtty->version = __raw_readl(base + GOLDFISH_TTY_REG_VERSION);
+ qtty->version = gf_ioread32(base + GOLDFISH_TTY_REG_VERSION);
/*
* Goldfish TTY device on Ranchu emulator (qemu2)
@@ -374,7 +374,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
}
}
- __raw_writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD);
+ gf_iowrite32(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_REG_CMD);
ret = request_irq(irq, goldfish_tty_interrupt, IRQF_SHARED,
"goldfish_tty", qtty);
@@ -436,7 +436,7 @@ static int goldfish_tty_remove(struct platform_device *pdev)
#ifdef CONFIG_GOLDFISH_TTY_EARLY_CONSOLE
static void gf_early_console_putchar(struct uart_port *port, int ch)
{
- __raw_writel(ch, port->membase);
+ gf_iowrite32(ch, port->membase);
}
static void gf_early_write(struct console *con, const char *s, unsigned int n)
diff --git a/include/linux/goldfish.h b/include/linux/goldfish.h
index 12be1601fd84..bcc17f95b906 100644
--- a/include/linux/goldfish.h
+++ b/include/linux/goldfish.h
@@ -8,14 +8,21 @@
/* Helpers for Goldfish virtual platform */
+#ifndef gf_ioread32
+#define gf_ioread32 ioread32
+#endif
+#ifndef gf_iowrite32
+#define gf_iowrite32 iowrite32
+#endif
+
static inline void gf_write_ptr(const void *ptr, void __iomem *portl,
void __iomem *porth)
{
const unsigned long addr = (unsigned long)ptr;
- __raw_writel(lower_32_bits(addr), portl);
+ gf_iowrite32(lower_32_bits(addr), portl);
#ifdef CONFIG_64BIT
- __raw_writel(upper_32_bits(addr), porth);
+ gf_iowrite32(upper_32_bits(addr), porth);
#endif
}
@@ -23,9 +30,9 @@ static inline void gf_write_dma_addr(const dma_addr_t addr,
void __iomem *portl,
void __iomem *porth)
{
- __raw_writel(lower_32_bits(addr), portl);
+ gf_iowrite32(lower_32_bits(addr), portl);
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
- __raw_writel(upper_32_bits(addr), porth);
+ gf_iowrite32(upper_32_bits(addr), porth);
#endif
}
--
2.34.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32()
2022-01-20 8:03 [PATCH v11 0/5] m68k: Add Virtual M68k Machine Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 1/5] m68k: add asm/config.h Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 2/5] tty: goldfish: introduce gf_ioread32()/gf_iowrite32() Laurent Vivier
@ 2022-01-20 8:03 ` Laurent Vivier
2022-01-20 17:35 ` kernel test robot
2022-01-20 17:35 ` kernel test robot
2022-01-20 8:03 ` [PATCH v11 4/5] clocksource/drivers: Add a goldfish-timer clocksource Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 5/5] m68k: introduce a virtual m68k machine Laurent Vivier
4 siblings, 2 replies; 14+ messages in thread
From: Laurent Vivier @ 2022-01-20 8:03 UTC (permalink / raw)
To: linux-kernel
Cc: Alessandro Zummo, linux-rtc, John Stultz, Arnd Bergmann,
Daniel Lezcano, Jiaxun Yang, Alexandre Belloni, linux-m68k,
Thomas Gleixner, Stephen Boyd, Geert Uytterhoeven,
Laurent Vivier
replace readl()/writel() by gf_ioread32()/gf_iowrite32()
as done for goldfish-tty.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
drivers/rtc/rtc-goldfish.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/rtc/rtc-goldfish.c b/drivers/rtc/rtc-goldfish.c
index 7ab95d052644..a3a556f6a3e0 100644
--- a/drivers/rtc/rtc-goldfish.c
+++ b/drivers/rtc/rtc-goldfish.c
@@ -41,8 +41,8 @@ static int goldfish_rtc_read_alarm(struct device *dev,
rtcdrv = dev_get_drvdata(dev);
base = rtcdrv->base;
- rtc_alarm_low = readl(base + TIMER_ALARM_LOW);
- rtc_alarm_high = readl(base + TIMER_ALARM_HIGH);
+ rtc_alarm_low = gf_ioread32(base + TIMER_ALARM_LOW);
+ rtc_alarm_high = gf_ioread32(base + TIMER_ALARM_HIGH);
rtc_alarm = (rtc_alarm_high << 32) | rtc_alarm_low;
do_div(rtc_alarm, NSEC_PER_SEC);
@@ -50,7 +50,7 @@ static int goldfish_rtc_read_alarm(struct device *dev,
rtc_time64_to_tm(rtc_alarm, &alrm->time);
- if (readl(base + TIMER_ALARM_STATUS))
+ if (gf_ioread32(base + TIMER_ALARM_STATUS))
alrm->enabled = 1;
else
alrm->enabled = 0;
@@ -71,18 +71,18 @@ static int goldfish_rtc_set_alarm(struct device *dev,
if (alrm->enabled) {
rtc_alarm64 = rtc_tm_to_time64(&alrm->time) * NSEC_PER_SEC;
- writel((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
- writel(rtc_alarm64, base + TIMER_ALARM_LOW);
- writel(1, base + TIMER_IRQ_ENABLED);
+ gf_iowrite32((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
+ gf_iowrite32(rtc_alarm64, base + TIMER_ALARM_LOW);
+ gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
} else {
/*
* if this function was called with enabled=0
* then it could mean that the application is
* trying to cancel an ongoing alarm
*/
- rtc_status_reg = readl(base + TIMER_ALARM_STATUS);
+ rtc_status_reg = gf_ioread32(base + TIMER_ALARM_STATUS);
if (rtc_status_reg)
- writel(1, base + TIMER_CLEAR_ALARM);
+ gf_iowrite32(1, base + TIMER_CLEAR_ALARM);
}
return 0;
@@ -98,9 +98,9 @@ static int goldfish_rtc_alarm_irq_enable(struct device *dev,
base = rtcdrv->base;
if (enabled)
- writel(1, base + TIMER_IRQ_ENABLED);
+ gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
else
- writel(0, base + TIMER_IRQ_ENABLED);
+ gf_iowrite32(0, base + TIMER_IRQ_ENABLED);
return 0;
}
@@ -110,7 +110,7 @@ static irqreturn_t goldfish_rtc_interrupt(int irq, void *dev_id)
struct goldfish_rtc *rtcdrv = dev_id;
void __iomem *base = rtcdrv->base;
- writel(1, base + TIMER_CLEAR_INTERRUPT);
+ gf_iowrite32(1, base + TIMER_CLEAR_INTERRUPT);
rtc_update_irq(rtcdrv->rtc, 1, RTC_IRQF | RTC_AF);
@@ -128,8 +128,8 @@ static int goldfish_rtc_read_time(struct device *dev, struct rtc_time *tm)
rtcdrv = dev_get_drvdata(dev);
base = rtcdrv->base;
- time_low = readl(base + TIMER_TIME_LOW);
- time_high = readl(base + TIMER_TIME_HIGH);
+ time_low = gf_ioread32(base + TIMER_TIME_LOW);
+ time_high = gf_ioread32(base + TIMER_TIME_HIGH);
time = (time_high << 32) | time_low;
do_div(time, NSEC_PER_SEC);
@@ -149,8 +149,8 @@ static int goldfish_rtc_set_time(struct device *dev, struct rtc_time *tm)
base = rtcdrv->base;
now64 = rtc_tm_to_time64(tm) * NSEC_PER_SEC;
- writel((now64 >> 32), base + TIMER_TIME_HIGH);
- writel(now64, base + TIMER_TIME_LOW);
+ gf_iowrite32((now64 >> 32), base + TIMER_TIME_HIGH);
+ gf_iowrite32(now64, base + TIMER_TIME_LOW);
return 0;
}
--
2.34.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v11 4/5] clocksource/drivers: Add a goldfish-timer clocksource
2022-01-20 8:03 [PATCH v11 0/5] m68k: Add Virtual M68k Machine Laurent Vivier
` (2 preceding siblings ...)
2022-01-20 8:03 ` [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32() Laurent Vivier
@ 2022-01-20 8:03 ` Laurent Vivier
2022-01-21 12:23 ` kernel test robot
2022-01-20 8:03 ` [PATCH v11 5/5] m68k: introduce a virtual m68k machine Laurent Vivier
4 siblings, 1 reply; 14+ messages in thread
From: Laurent Vivier @ 2022-01-20 8:03 UTC (permalink / raw)
To: linux-kernel
Cc: Alessandro Zummo, linux-rtc, John Stultz, Arnd Bergmann,
Daniel Lezcano, Jiaxun Yang, Alexandre Belloni, linux-m68k,
Thomas Gleixner, Stephen Boyd, Geert Uytterhoeven,
Laurent Vivier
Add a clocksource based on the goldfish-rtc device.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
drivers/clocksource/Kconfig | 7 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-goldfish.c | 162 +++++++++++++++++++++++++++
include/clocksource/timer-goldfish.h | 11 ++
4 files changed, 181 insertions(+)
create mode 100644 drivers/clocksource/timer-goldfish.c
create mode 100644 include/clocksource/timer-goldfish.h
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cfb8ea0df3b1..94f00374cebb 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -721,4 +721,11 @@ config MICROCHIP_PIT64B
modes and high resolution. It is used as a clocksource
and a clockevent.
+config GOLDFISH_TIMER
+ bool "Clocksource using goldfish-rtc"
+ depends on M68K || COMPILE_TEST
+ depends on RTC_DRV_GOLDFISH
+ help
+ Support for the timer/counter of goldfish-rtc
+
endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index fa5f624eadb6..12f5d7e8cc2d 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -89,3 +89,4 @@ obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
obj-$(CONFIG_HYPERV_TIMER) += hyperv_timer.o
obj-$(CONFIG_MICROCHIP_PIT64B) += timer-microchip-pit64b.o
obj-$(CONFIG_MSC313E_TIMER) += timer-msc313e.o
+obj-$(CONFIG_GOLDFISH_TIMER) += timer-goldfish.o
diff --git a/drivers/clocksource/timer-goldfish.c b/drivers/clocksource/timer-goldfish.c
new file mode 100644
index 000000000000..b57c964b3dda
--- /dev/null
+++ b/drivers/clocksource/timer-goldfish.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <clocksource/timer-goldfish.h>
+
+#define TIMER_TIME_LOW 0x00 /* get low bits of current time */
+ /* and update TIMER_TIME_HIGH */
+#define TIMER_TIME_HIGH 0x04 /* get high bits of time at last */
+ /* TIMER_TIME_LOW read */
+#define TIMER_ALARM_LOW 0x08 /* set low bits of alarm and */
+ /* activate it */
+#define TIMER_ALARM_HIGH 0x0c /* set high bits of next alarm */
+#define TIMER_IRQ_ENABLED 0x10
+#define TIMER_CLEAR_ALARM 0x14
+#define TIMER_ALARM_STATUS 0x18
+#define TIMER_CLEAR_INTERRUPT 0x1c
+
+struct goldfish_timer {
+ struct clocksource cs;
+ struct clock_event_device ced;
+ struct resource res;
+ void __iomem *base;
+ int irq;
+};
+
+static struct goldfish_timer *ced_to_gf(struct clock_event_device *ced)
+{
+ return container_of(ced, struct goldfish_timer, ced);
+}
+
+static struct goldfish_timer *cs_to_gf(struct clocksource *cs)
+{
+ return container_of(cs, struct goldfish_timer, cs);
+}
+
+static u64 goldfish_timer_read(struct clocksource *cs)
+{
+ struct goldfish_timer *timerdrv = cs_to_gf(cs);
+ void __iomem *base = timerdrv->base;
+ u32 time_low, time_high;
+ u64 ticks;
+
+ /*
+ * time_low: get low bits of current time and update time_high
+ * time_high: get high bits of time at last time_low read
+ */
+ time_low = gf_ioread32(base + TIMER_TIME_LOW);
+ time_high = gf_ioread32(base + TIMER_TIME_HIGH);
+
+ ticks = ((u64)time_high << 32) | time_low;
+
+ return ticks;
+}
+
+static int goldfish_timer_set_oneshot(struct clock_event_device *evt)
+{
+ struct goldfish_timer *timerdrv = ced_to_gf(evt);
+ void __iomem *base = timerdrv->base;
+
+ gf_iowrite32(0, base + TIMER_ALARM_HIGH);
+ gf_iowrite32(0, base + TIMER_ALARM_LOW);
+ gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
+
+ return 0;
+}
+
+static int goldfish_timer_shutdown(struct clock_event_device *evt)
+{
+ struct goldfish_timer *timerdrv = ced_to_gf(evt);
+ void __iomem *base = timerdrv->base;
+
+ gf_iowrite32(0, base + TIMER_IRQ_ENABLED);
+
+ return 0;
+}
+
+static int goldfish_timer_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ struct goldfish_timer *timerdrv = ced_to_gf(evt);
+ void __iomem *base = timerdrv->base;
+ u64 now;
+
+ now = goldfish_timer_read(&timerdrv->cs);
+
+ now += delta;
+
+ gf_iowrite32(upper_32_bits(now), base + TIMER_ALARM_HIGH);
+ gf_iowrite32(lower_32_bits(now), base + TIMER_ALARM_LOW);
+
+ return 0;
+}
+
+static irqreturn_t golfish_timer_tick(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ struct goldfish_timer *timerdrv = ced_to_gf(evt);
+ void __iomem *base = timerdrv->base;
+
+ gf_iowrite32(1, base + TIMER_CLEAR_INTERRUPT);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+void __init goldfish_timer_init(int irq, void __iomem *base)
+{
+ struct goldfish_timer *timerdrv;
+ int ret;
+
+ timerdrv = kzalloc(sizeof(*timerdrv), GFP_KERNEL);
+ if (!timerdrv)
+ return;
+
+ timerdrv->base = base;
+ timerdrv->irq = irq;
+
+ timerdrv->ced = (struct clock_event_device){
+ .name = "goldfish_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = goldfish_timer_shutdown,
+ .set_state_oneshot = goldfish_timer_set_oneshot,
+ .set_next_event = goldfish_timer_next_event,
+ };
+ timerdrv->res = (struct resource){
+ .name = "goldfish_timer",
+ .start = (unsigned long)base,
+ .end = (unsigned long)base + 0xfff,
+ };
+
+ if (request_resource(&iomem_resource, &timerdrv->res)) {
+ pr_err("Cannot allocate goldfish-timer resource\n");
+ return;
+ }
+
+ timerdrv->cs = (struct clocksource){
+ .name = "goldfish_timer",
+ .rating = 400,
+ .read = goldfish_timer_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = 0,
+ .max_idle_ns = LONG_MAX,
+ };
+
+ clocksource_register_hz(&timerdrv->cs, NSEC_PER_SEC);
+
+ ret = request_irq(timerdrv->irq, golfish_timer_tick, IRQF_TIMER,
+ "goldfish_timer", &timerdrv->ced);
+ if (ret) {
+ pr_err("Couldn't register goldfish-timer interrupt\n");
+ return;
+ }
+
+ clockevents_config_and_register(&timerdrv->ced, NSEC_PER_SEC,
+ 1, 0xffffffff);
+}
diff --git a/include/clocksource/timer-goldfish.h b/include/clocksource/timer-goldfish.h
new file mode 100644
index 000000000000..b237267844f1
--- /dev/null
+++ b/include/clocksource/timer-goldfish.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * goldfish-timer clocksource
+ */
+
+#ifndef _CLOCKSOURCE_GOLDFISH_TIMER_H
+#define _CLOCKSOURCE_GOLDFISH_TIMER_H
+
+extern void goldfish_timer_init(int irq, void __iomem *base);
+
+#endif /* _CLOCKSOURCE_GOLDFISH_TIMER_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v11 5/5] m68k: introduce a virtual m68k machine
2022-01-20 8:03 [PATCH v11 0/5] m68k: Add Virtual M68k Machine Laurent Vivier
` (3 preceding siblings ...)
2022-01-20 8:03 ` [PATCH v11 4/5] clocksource/drivers: Add a goldfish-timer clocksource Laurent Vivier
@ 2022-01-20 8:03 ` Laurent Vivier
4 siblings, 0 replies; 14+ messages in thread
From: Laurent Vivier @ 2022-01-20 8:03 UTC (permalink / raw)
To: linux-kernel
Cc: Alessandro Zummo, linux-rtc, John Stultz, Arnd Bergmann,
Daniel Lezcano, Jiaxun Yang, Alexandre Belloni, linux-m68k,
Thomas Gleixner, Stephen Boyd, Geert Uytterhoeven,
Laurent Vivier
This machine allows to have up to 3.2 GiB and 128 Virtio devices.
It is based on android goldfish devices.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
arch/m68k/Kbuild | 1 +
arch/m68k/Kconfig.machine | 17 +++
arch/m68k/configs/virt_defconfig | 65 ++++++++++
arch/m68k/include/asm/config.h | 2 +
arch/m68k/include/asm/io.h | 3 +
arch/m68k/include/asm/irq.h | 3 +-
arch/m68k/include/asm/pgtable_mm.h | 7 ++
arch/m68k/include/asm/setup.h | 44 +++++--
arch/m68k/include/asm/virt.h | 25 ++++
arch/m68k/include/uapi/asm/bootinfo-virt.h | 18 +++
arch/m68k/include/uapi/asm/bootinfo.h | 1 +
arch/m68k/kernel/Makefile | 1 +
arch/m68k/kernel/head.S | 31 +++++
arch/m68k/kernel/setup_mm.c | 7 ++
arch/m68k/mm/kmap.c | 23 ++--
arch/m68k/virt/Makefile | 6 +
arch/m68k/virt/config.c | 119 ++++++++++++++++++
arch/m68k/virt/ints.c | 133 +++++++++++++++++++++
arch/m68k/virt/platform.c | 72 +++++++++++
19 files changed, 560 insertions(+), 18 deletions(-)
create mode 100644 arch/m68k/configs/virt_defconfig
create mode 100644 arch/m68k/include/asm/virt.h
create mode 100644 arch/m68k/include/uapi/asm/bootinfo-virt.h
create mode 100644 arch/m68k/virt/Makefile
create mode 100644 arch/m68k/virt/config.c
create mode 100644 arch/m68k/virt/ints.c
create mode 100644 arch/m68k/virt/platform.c
diff --git a/arch/m68k/Kbuild b/arch/m68k/Kbuild
index 18abb35c26a1..7762af9f6def 100644
--- a/arch/m68k/Kbuild
+++ b/arch/m68k/Kbuild
@@ -17,3 +17,4 @@ obj-$(CONFIG_M68060) += ifpsp060/
obj-$(CONFIG_M68KFPU_EMU) += math-emu/
obj-$(CONFIG_M68000) += 68000/
obj-$(CONFIG_COLDFIRE) += coldfire/
+obj-$(CONFIG_VIRT) += virt/
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index eeab4f3e6c19..13b900bf8eb8 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -149,6 +149,23 @@ config SUN3
If you don't want to compile a kernel exclusively for a Sun 3, say N.
+config VIRT
+ bool "Virtual M68k Machine support"
+ depends on MMU
+ select GENERIC_CLOCKEVENTS
+ select M68040
+ select MMU_MOTOROLA if MMU
+ select RTC_CLASS
+ select GOLDFISH
+ select RTC_DRV_GOLDFISH
+ select GOLDFISH_TIMER
+ select GOLDFISH_TTY
+ select TTY
+ select VIRTIO_MMIO
+ help
+ This options enable a pure virtual machine based on m68k,
+ VIRTIO MMIO devices and GOLDFISH interfaces (TTY, RTC, PIC)
+
config PILOT
bool
diff --git a/arch/m68k/configs/virt_defconfig b/arch/m68k/configs/virt_defconfig
new file mode 100644
index 000000000000..462e51ef69eb
--- /dev/null
+++ b/arch/m68k/configs/virt_defconfig
@@ -0,0 +1,65 @@
+CONFIG_LOCALVERSION="-virt"
+CONFIG_SYSVIPC=y
+CONFIG_CGROUPS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_RDMA=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_VIRT=y
+CONFIG_PROC_HARDWARE=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_LDM_PARTITION=y
+CONFIG_LDM_DEBUG=y
+CONFIG_SUN_PARTITION=y
+CONFIG_SYSV68_PARTITION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_CGROUP_NET_PRIO=y
+CONFIG_CGROUP_NET_CLASSID=y
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
+CONFIG_DEVTMPFS=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_DRM=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_FB=y
+CONFIG_VIRT_DRIVERS=y
+CONFIG_VIRTIO_INPUT=y
+CONFIG_EXT4_FS=y
+CONFIG_AUTOFS_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_9P_FS=y
+CONFIG_9P_FS_POSIX_ACL=y
+CONFIG_9P_FS_SECURITY=y
+CONFIG_EARLY_PRINTK=y
diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h
index aae61070628b..b9dacc52f2c8 100644
--- a/arch/m68k/include/asm/config.h
+++ b/arch/m68k/include/asm/config.h
@@ -17,6 +17,7 @@ extern int mvme16x_parse_bootinfo(const struct bi_record *record);
extern int mvme147_parse_bootinfo(const struct bi_record *record);
extern int hp300_parse_bootinfo(const struct bi_record *record);
extern int apollo_parse_bootinfo(const struct bi_record *record);
+extern int virt_parse_bootinfo(const struct bi_record *record);
extern void config_amiga(void);
extern void config_atari(void);
@@ -29,5 +30,6 @@ extern void config_bvme6000(void);
extern void config_hp300(void);
extern void config_q40(void);
extern void config_sun3x(void);
+extern void config_virt(void);
#endif /* _M68K_CONFIG_H */
diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h
index aabe6420ead2..aaeabc65e63c 100644
--- a/arch/m68k/include/asm/io.h
+++ b/arch/m68k/include/asm/io.h
@@ -8,6 +8,9 @@
#include <asm/io_mm.h>
#endif
+#define gf_ioread32 ioread32be
+#define gf_iowrite32 iowrite32be
+
#include <asm-generic/io.h>
#endif /* _M68K_IO_H */
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index 91dd493791d7..7829e955ca04 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -12,7 +12,8 @@
*/
#if defined(CONFIG_COLDFIRE)
#define NR_IRQS 256
-#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || \
+ defined(CONFIG_SUN3X) || defined(CONFIG_VIRT)
#define NR_IRQS 200
#elif defined(CONFIG_ATARI)
#define NR_IRQS 141
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index 143ba7de9bda..9b4e2fe2ac82 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -80,6 +80,9 @@
#elif defined(CONFIG_COLDFIRE)
#define KMAP_START 0xe0000000
#define KMAP_END 0xf0000000
+#elif defined(CONFIG_VIRT)
+#define KMAP_START 0xdf000000
+#define KMAP_END 0xff000000
#else
#define KMAP_START 0xd0000000
#define KMAP_END 0xf0000000
@@ -92,6 +95,10 @@ extern unsigned long m68k_vmalloc_end;
#elif defined(CONFIG_COLDFIRE)
#define VMALLOC_START 0xd0000000
#define VMALLOC_END 0xe0000000
+#elif defined(CONFIG_VIRT)
+#define VMALLOC_OFFSET PAGE_SIZE
+#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END KMAP_START
#else
/* Just any arbitrary offset to the start of the vmalloc VM area: the
* current 8MB value just means that there will be a 8MB "hole" after the
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
index 8f2023f8c1c4..2c99477aaf89 100644
--- a/arch/m68k/include/asm/setup.h
+++ b/arch/m68k/include/asm/setup.h
@@ -37,7 +37,8 @@ extern unsigned long m68k_machtype;
#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
|| defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \
+ || defined(CONFIG_VIRT)
# define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
#else
# define MACH_AMIGA_ONLY
@@ -50,7 +51,8 @@ extern unsigned long m68k_machtype;
#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
|| defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \
+ || defined(CONFIG_VIRT)
# define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
#else
# define MACH_ATARI_ONLY
@@ -63,7 +65,8 @@ extern unsigned long m68k_machtype;
#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
|| defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \
+ || defined(CONFIG_VIRT)
# define MACH_IS_MAC (m68k_machtype == MACH_MAC)
#else
# define MACH_MAC_ONLY
@@ -84,7 +87,8 @@ extern unsigned long m68k_machtype;
#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
|| defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \
|| defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \
+ || defined(CONFIG_VIRT)
# define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
#else
# define MACH_APOLLO_ONLY
@@ -97,7 +101,8 @@ extern unsigned long m68k_machtype;
#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
|| defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \
|| defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x) \
+ || defined(CONFIG_VIRT)
# define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
#else
# define MACH_MVME147_ONLY
@@ -110,7 +115,8 @@ extern unsigned long m68k_machtype;
#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
|| defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \
|| defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \
+ || defined(CONFIG_VIRT)
# define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
#else
# define MACH_MVME16x_ONLY
@@ -123,7 +129,8 @@ extern unsigned long m68k_machtype;
#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
|| defined(CONFIG_HP300) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \
+ || defined(CONFIG_VIRT)
# define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
#else
# define MACH_BVME6000_ONLY
@@ -136,7 +143,8 @@ extern unsigned long m68k_machtype;
#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
|| defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \
+ || defined(CONFIG_VIRT)
# define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
#else
# define MACH_HP300_ONLY
@@ -149,7 +157,8 @@ extern unsigned long m68k_machtype;
#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
|| defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
- || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+ || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \
+ || defined(CONFIG_VIRT)
# define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
#else
# define MACH_Q40_ONLY
@@ -162,7 +171,8 @@ extern unsigned long m68k_machtype;
#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
|| defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
|| defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
- || defined(CONFIG_Q40) || defined(CONFIG_MVME147)
+ || defined(CONFIG_Q40) || defined(CONFIG_MVME147) \
+ || defined(CONFIG_VIRT)
# define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
#else
# define CONFIG_SUN3X_ONLY
@@ -170,6 +180,20 @@ extern unsigned long m68k_machtype;
# define MACH_TYPE (MACH_SUN3X)
#endif
+#if !defined(CONFIG_VIRT)
+# define MACH_IS_VIRT (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+ || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \
+ || defined(CONFIG_Q40) || defined(CONFIG_SUN3X) \
+ || defined(CONFIG_MVME147)
+# define MACH_IS_VIRT (m68k_machtype == MACH_VIRT)
+#else
+# define MACH_VIRT_ONLY
+# define MACH_IS_VIRT (1)
+# define MACH_TYPE (MACH_VIRT)
+#endif
+
#ifndef MACH_TYPE
# define MACH_TYPE (m68k_machtype)
#endif
diff --git a/arch/m68k/include/asm/virt.h b/arch/m68k/include/asm/virt.h
new file mode 100644
index 000000000000..87647c17afd7
--- /dev/null
+++ b/arch/m68k/include/asm/virt.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_VIRT_H
+#define __ASM_VIRT_H
+
+#define NUM_VIRT_SOURCES 200
+
+struct virt_booter_device_data {
+ unsigned long mmio;
+ unsigned long irq;
+};
+
+struct virt_booter_data {
+ unsigned long qemu_version;
+ struct virt_booter_device_data pic;
+ struct virt_booter_device_data rtc;
+ struct virt_booter_device_data tty;
+ struct virt_booter_device_data ctrl;
+ struct virt_booter_device_data virtio;
+};
+
+extern struct virt_booter_data virt_bi_data;
+
+extern void __init virt_init_IRQ(void);
+
+#endif
diff --git a/arch/m68k/include/uapi/asm/bootinfo-virt.h b/arch/m68k/include/uapi/asm/bootinfo-virt.h
new file mode 100644
index 000000000000..e4db7e2213ab
--- /dev/null
+++ b/arch/m68k/include/uapi/asm/bootinfo-virt.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * asm/bootinfo-virt.h -- Virtual-m68k-specific boot information definitions
+ */
+
+#ifndef _UAPI_ASM_M68K_BOOTINFO_VIRT_H
+#define _UAPI_ASM_M68K_BOOTINFO_VIRT_H
+
+#define BI_VIRT_QEMU_VERSION 0x8000
+#define BI_VIRT_GF_PIC_BASE 0x8001
+#define BI_VIRT_GF_RTC_BASE 0x8002
+#define BI_VIRT_GF_TTY_BASE 0x8003
+#define BI_VIRT_VIRTIO_BASE 0x8004
+#define BI_VIRT_CTRL_BASE 0x8005
+
+#define VIRT_BOOTI_VERSION MK_BI_VERSION(2, 0)
+
+#endif /* _UAPI_ASM_M68K_BOOTINFO_MAC_H */
diff --git a/arch/m68k/include/uapi/asm/bootinfo.h b/arch/m68k/include/uapi/asm/bootinfo.h
index 38d3140381fa..203d9cbf9630 100644
--- a/arch/m68k/include/uapi/asm/bootinfo.h
+++ b/arch/m68k/include/uapi/asm/bootinfo.h
@@ -83,6 +83,7 @@ struct mem_info {
#define MACH_SUN3X 11
#define MACH_M54XX 12
#define MACH_M5441X 13
+#define MACH_VIRT 14
/*
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index dbac7f8743fc..c0833da6a2ca 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -11,6 +11,7 @@ extra-$(CONFIG_VME) := head.o
extra-$(CONFIG_HP300) := head.o
extra-$(CONFIG_Q40) := head.o
extra-$(CONFIG_SUN3X) := head.o
+extra-$(CONFIG_VIRT) := head.o
extra-$(CONFIG_SUN3) := sun3-head.o
extra-y += vmlinux.lds
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index 493c95db0e51..9e812d8606be 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -262,6 +262,7 @@
#include <asm/bootinfo-hp300.h>
#include <asm/bootinfo-mac.h>
#include <asm/bootinfo-q40.h>
+#include <asm/bootinfo-virt.h>
#include <asm/bootinfo-vme.h>
#include <asm/setup.h>
#include <asm/entry.h>
@@ -534,6 +535,7 @@ func_define putn,1
#define is_not_apollo(lab) cmpl &MACH_APOLLO,%pc@(m68k_machtype); jne lab
#define is_not_q40(lab) cmpl &MACH_Q40,%pc@(m68k_machtype); jne lab
#define is_not_sun3x(lab) cmpl &MACH_SUN3X,%pc@(m68k_machtype); jne lab
+#define is_not_virt(lab) cmpl &MACH_VIRT,%pc@(m68k_machtype); jne lab
#define hasnt_leds(lab) cmpl &MACH_HP300,%pc@(m68k_machtype); \
jeq 42f; \
@@ -647,6 +649,14 @@ ENTRY(__start)
L(test_notmac):
#endif /* CONFIG_MAC */
+#ifdef CONFIG_VIRT
+ is_not_virt(L(test_notvirt))
+
+ get_bi_record BI_VIRT_GF_TTY_BASE
+ lea %pc@(L(virt_gf_tty_base)),%a1
+ movel %a0@,%a1@
+L(test_notvirt):
+#endif /* CONFIG_VIRT */
/*
* There are ultimately two pieces of information we want for all kinds of
@@ -1237,6 +1247,13 @@ L(mmu_init_not_mac):
L(notsun3x):
#endif
+#ifdef CONFIG_VIRT
+ is_not_virt(L(novirt))
+ mmu_map_tt #1,#0xFF000000,#0x01000000,#_PAGE_NOCACHE_S
+ jbra L(mmu_init_done)
+L(novirt):
+#endif
+
#ifdef CONFIG_APOLLO
is_not_apollo(L(notapollo))
@@ -3186,6 +3203,14 @@ func_start serial_putc,%d0/%d1/%a0/%a1
3:
#endif
+#ifdef CONFIG_VIRT
+ is_not_virt(1f)
+
+ movel L(virt_gf_tty_base),%a1
+ movel %d0,%a1@(GF_PUT_CHAR)
+1:
+#endif
+
L(serial_putc_done):
func_return serial_putc
@@ -3865,3 +3890,9 @@ q40_mem_cptr:
L(q40_do_debug):
.long 0
#endif
+
+#if defined(CONFIG_VIRT)
+GF_PUT_CHAR = 0x00
+L(virt_gf_tty_base):
+ .long 0
+#endif /* CONFIG_VIRT */
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 8228275aae3e..39ba09ccb538 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -182,6 +182,8 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
unknown = hp300_parse_bootinfo(record);
else if (MACH_IS_APOLLO)
unknown = apollo_parse_bootinfo(record);
+ else if (MACH_IS_VIRT)
+ unknown = virt_parse_bootinfo(record);
else
unknown = 1;
}
@@ -312,6 +314,11 @@ void __init setup_arch(char **cmdline_p)
cf_mmu_context_init();
config_BSP(NULL, 0);
break;
+#endif
+#ifdef CONFIG_VIRT
+ case MACH_VIRT:
+ config_virt();
+ break;
#endif
default:
panic("No configuration setup");
diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c
index 20ddf71b43d0..39729f40d106 100644
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -179,6 +179,12 @@ void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cachefla
return (void __iomem *)physaddr;
}
#endif
+#ifdef CONFIG_VIRT
+ if (MACH_IS_VIRT) {
+ if (physaddr >= 0xff000000 && cacheflag == IOMAP_NOCACHE_SER)
+ return (void __iomem *)physaddr;
+ }
+#endif
#ifdef CONFIG_COLDFIRE
if (__cf_internalio(physaddr))
return (void __iomem *) physaddr;
@@ -292,18 +298,21 @@ EXPORT_SYMBOL(__ioremap);
*/
void iounmap(void __iomem *addr)
{
-#ifdef CONFIG_AMIGA
- if ((!MACH_IS_AMIGA) ||
- (((unsigned long)addr < 0x40000000) ||
- ((unsigned long)addr > 0x60000000)))
- free_io_area((__force void *)addr);
-#else
+#if defined(CONFIG_AMIGA)
+ if (MACH_IS_AMIGA &&
+ ((unsigned long)addr >= 0x40000000) &&
+ ((unsigned long)addr < 0x60000000))
+ return;
+#endif
+#if defined(CONFIG_VIRT)
+ if (MACH_IS_VIRT && (unsigned long)addr >= 0xff000000)
+ return;
+#endif
#ifdef CONFIG_COLDFIRE
if (cf_internalio(addr))
return;
#endif
free_io_area((__force void *)addr);
-#endif
}
EXPORT_SYMBOL(iounmap);
diff --git a/arch/m68k/virt/Makefile b/arch/m68k/virt/Makefile
new file mode 100644
index 000000000000..54b9b2866654
--- /dev/null
+++ b/arch/m68k/virt/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for Linux arch/m68k/virt source directory
+#
+
+obj-y := config.o ints.o platform.o
diff --git a/arch/m68k/virt/config.c b/arch/m68k/virt/config.c
new file mode 100644
index 000000000000..e92a22dad1bc
--- /dev/null
+++ b/arch/m68k/virt/config.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/serial_core.h>
+#include <clocksource/timer-goldfish.h>
+
+#include <asm/bootinfo.h>
+#include <asm/bootinfo-virt.h>
+#include <asm/byteorder.h>
+#include <asm/machdep.h>
+#include <asm/virt.h>
+#include <asm/config.h>
+
+struct virt_booter_data virt_bi_data;
+
+#define VIRT_CTRL_REG_FEATURES 0x00
+#define VIRT_CTRL_REG_CMD 0x04
+
+enum {
+ CMD_NOOP,
+ CMD_RESET,
+ CMD_HALT,
+ CMD_PANIC,
+};
+
+static void virt_get_model(char *str)
+{
+ /* str is 80 characters long */
+ sprintf(str, "QEMU Virtual M68K Machine (%u.%u.%u)",
+ (u8)(virt_bi_data.qemu_version >> 24),
+ (u8)(virt_bi_data.qemu_version >> 16),
+ (u8)(virt_bi_data.qemu_version >> 8));
+}
+
+static void virt_halt(void)
+{
+ void __iomem *base = (void *)virt_bi_data.ctrl.mmio;
+
+ iowrite32be(CMD_HALT, base + VIRT_CTRL_REG_CMD);
+ local_irq_disable();
+ while (1)
+ ;
+}
+
+static void virt_reset(void)
+{
+ void __iomem *base = (void *)virt_bi_data.ctrl.mmio;
+
+ iowrite32be(CMD_RESET, base + VIRT_CTRL_REG_CMD);
+ local_irq_disable();
+ while (1)
+ ;
+}
+
+/*
+ * Parse a virtual-m68k-specific record in the bootinfo
+ */
+
+int __init virt_parse_bootinfo(const struct bi_record *record)
+{
+ int unknown = 0;
+ const void *data = record->data;
+
+ switch (be16_to_cpu(record->tag)) {
+ case BI_VIRT_QEMU_VERSION:
+ virt_bi_data.qemu_version = be32_to_cpup(data);
+ break;
+ case BI_VIRT_GF_PIC_BASE:
+ virt_bi_data.pic.mmio = be32_to_cpup(data);
+ data += 4;
+ virt_bi_data.pic.irq = be32_to_cpup(data);
+ break;
+ case BI_VIRT_GF_RTC_BASE:
+ virt_bi_data.rtc.mmio = be32_to_cpup(data);
+ data += 4;
+ virt_bi_data.rtc.irq = be32_to_cpup(data);
+ break;
+ case BI_VIRT_GF_TTY_BASE:
+ virt_bi_data.tty.mmio = be32_to_cpup(data);
+ data += 4;
+ virt_bi_data.tty.irq = be32_to_cpup(data);
+ break;
+ case BI_VIRT_CTRL_BASE:
+ virt_bi_data.ctrl.mmio = be32_to_cpup(data);
+ data += 4;
+ virt_bi_data.ctrl.irq = be32_to_cpup(data);
+ break;
+ case BI_VIRT_VIRTIO_BASE:
+ virt_bi_data.virtio.mmio = be32_to_cpup(data);
+ data += 4;
+ virt_bi_data.virtio.irq = be32_to_cpup(data);
+ break;
+ default:
+ unknown = 1;
+ break;
+ }
+ return unknown;
+}
+
+static void __init virt_sched_init(void)
+{
+ goldfish_timer_init(virt_bi_data.rtc.irq,
+ (void *)virt_bi_data.rtc.mmio);
+}
+
+void __init config_virt(void)
+{
+ char earlycon[24];
+
+ snprintf(earlycon, sizeof(earlycon), "early_gf_tty,0x%08lx",
+ virt_bi_data.tty.mmio);
+ setup_earlycon(earlycon);
+
+ mach_init_IRQ = virt_init_IRQ;
+ mach_sched_init = virt_sched_init;
+ mach_get_model = virt_get_model;
+ mach_reset = virt_reset;
+ mach_halt = virt_halt;
+ mach_power_off = virt_halt;
+}
diff --git a/arch/m68k/virt/ints.c b/arch/m68k/virt/ints.c
new file mode 100644
index 000000000000..c4e6386afeef
--- /dev/null
+++ b/arch/m68k/virt/ints.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/types.h>
+
+#include <asm/hwtest.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/virt.h>
+
+#define GFPIC_REG_IRQ_PENDING 0x04
+#define GFPIC_REG_IRQ_DISABLE_ALL 0x08
+#define GFPIC_REG_IRQ_DISABLE 0x0c
+#define GFPIC_REG_IRQ_ENABLE 0x10
+
+extern void show_registers(struct pt_regs *regs);
+
+/*
+ * 6 goldfish-pic for CPU IRQ #1 to IRQ #6
+ * CPU IRQ #1 -> PIC #1
+ * IRQ #1 to IRQ #31 -> unused
+ * IRQ #32 -> goldfish-tty
+ * CPU IRQ #2 -> PIC #2
+ * IRQ #1 to IRQ #32 -> virtio-mmio from 1 to 32
+ * CPU IRQ #3 -> PIC #3
+ * IRQ #1 to IRQ #32 -> virtio-mmio from 33 to 64
+ * CPU IRQ #4 -> PIC #4
+ * IRQ #1 to IRQ #32 -> virtio-mmio from 65 to 96
+ * CPU IRQ #5 -> PIC #5
+ * IRQ #1 to IRQ #32 -> virtio-mmio from 97 to 128
+ * CPU IRQ #6 -> PIC #6
+ * IRQ #1 -> goldfish-timer
+ * IRQ #2 -> goldfish-rtc
+ * IRQ #3 to IRQ #32 -> unused
+ * CPU IRQ #7 -> NMI
+ */
+
+static u32 gfpic_read(int pic, int reg)
+{
+ void __iomem *base = (void *)(virt_bi_data.pic.mmio + pic * 0x1000);
+
+ return ioread32be(base + reg);
+}
+
+static void gfpic_write(u32 value, int pic, int reg)
+{
+ void __iomem *base = (void *)(virt_bi_data.pic.mmio + pic * 0x1000);
+
+ iowrite32be(value, base + reg);
+}
+
+#define GF_PIC(irq) ((irq - IRQ_USER) / 32)
+#define GF_IRQ(irq) ((irq - IRQ_USER) % 32)
+
+static void virt_irq_enable(struct irq_data *data)
+{
+ gfpic_write(1 << GF_IRQ(data->irq), GF_PIC(data->irq),
+ GFPIC_REG_IRQ_ENABLE);
+}
+
+static void virt_irq_disable(struct irq_data *data)
+{
+ gfpic_write(1 << GF_IRQ(data->irq), GF_PIC(data->irq),
+ GFPIC_REG_IRQ_DISABLE);
+}
+
+static unsigned int virt_irq_startup(struct irq_data *data)
+{
+ virt_irq_enable(data);
+ return 0;
+}
+
+static irqreturn_t virt_nmi_handler(int irq, void *dev_id)
+{
+ static int in_nmi;
+
+ if (READ_ONCE(in_nmi))
+ return IRQ_HANDLED;
+ WRITE_ONCE(in_nmi, 1);
+
+ pr_warn("Non-Maskable Interrupt\n");
+ show_registers(get_irq_regs());
+
+ WRITE_ONCE(in_nmi, 0);
+ return IRQ_HANDLED;
+}
+
+static struct irq_chip virt_irq_chip = {
+ .name = "virt",
+ .irq_enable = virt_irq_enable,
+ .irq_disable = virt_irq_disable,
+ .irq_startup = virt_irq_startup,
+ .irq_shutdown = virt_irq_disable,
+};
+
+static void goldfish_pic_irq(struct irq_desc *desc)
+{
+ u32 irq_pending;
+ int irq_num;
+ int pic = desc->irq_data.irq - 1;
+
+ irq_pending = gfpic_read(pic, GFPIC_REG_IRQ_PENDING);
+ irq_num = IRQ_USER + pic * 32;
+
+ do {
+ if (irq_pending & 1)
+ generic_handle_irq(irq_num);
+ ++irq_num;
+ irq_pending >>= 1;
+ } while (irq_pending);
+}
+
+void __init virt_init_IRQ(void)
+{
+ int i;
+
+ m68k_setup_irq_controller(&virt_irq_chip, handle_simple_irq, IRQ_USER,
+ NUM_VIRT_SOURCES - IRQ_USER);
+
+ for (i = 0; i < 6; i++) {
+ irq_set_chained_handler(virt_bi_data.pic.irq + i,
+ goldfish_pic_irq);
+ }
+
+ if (request_irq(IRQ_AUTO_7, virt_nmi_handler, 0, "NMI",
+ virt_nmi_handler))
+ pr_err("Couldn't register NMI\n");
+}
diff --git a/arch/m68k/virt/platform.c b/arch/m68k/virt/platform.c
new file mode 100644
index 000000000000..f432b90dcd1a
--- /dev/null
+++ b/arch/m68k/virt/platform.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/memblock.h>
+#include <asm/virt.h>
+#include <asm/irq.h>
+
+#define VIRTIO_BUS_NB 128
+
+static int __init virt_virtio_init(int id)
+{
+ const struct resource res[] = {
+ DEFINE_RES_MEM(virt_bi_data.virtio.mmio + id * 0x200, 0x200),
+ DEFINE_RES_IRQ(virt_bi_data.virtio.irq + id),
+ };
+ struct platform_device *pdev;
+
+ pdev = platform_device_register_simple("virtio-mmio", id,
+ res, ARRAY_SIZE(res));
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
+}
+
+static int __init virt_platform_init(void)
+{
+ const struct resource goldfish_tty_res[] = {
+ DEFINE_RES_MEM(virt_bi_data.tty.mmio, 1),
+ DEFINE_RES_IRQ(virt_bi_data.tty.irq),
+ };
+ /* this is the second gf-rtc, the first one is used by the scheduler */
+ const struct resource goldfish_rtc_res[] = {
+ DEFINE_RES_MEM(virt_bi_data.rtc.mmio + 0x1000, 0x1000),
+ DEFINE_RES_IRQ(virt_bi_data.rtc.irq + 1),
+ };
+ struct platform_device *pdev;
+ int i;
+
+ if (!MACH_IS_VIRT)
+ return -ENODEV;
+
+ /* We need this to have DMA'able memory provided to goldfish-tty */
+ min_low_pfn = 0;
+
+ pdev = platform_device_register_simple("goldfish_tty",
+ PLATFORM_DEVID_NONE,
+ goldfish_tty_res,
+ ARRAY_SIZE(goldfish_tty_res));
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ pdev = platform_device_register_simple("goldfish_rtc",
+ PLATFORM_DEVID_NONE,
+ goldfish_rtc_res,
+ ARRAY_SIZE(goldfish_rtc_res));
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ for (i = 0; i < VIRTIO_BUS_NB; i++) {
+ int err;
+
+ err = virt_virtio_init(i);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+arch_initcall(virt_platform_init);
--
2.34.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v11 2/5] tty: goldfish: introduce gf_ioread32()/gf_iowrite32()
2022-01-20 8:03 ` [PATCH v11 2/5] tty: goldfish: introduce gf_ioread32()/gf_iowrite32() Laurent Vivier
@ 2022-01-20 8:50 ` Arnd Bergmann
2022-01-20 17:09 ` Laurent Vivier
0 siblings, 1 reply; 14+ messages in thread
From: Arnd Bergmann @ 2022-01-20 8:50 UTC (permalink / raw)
To: Laurent Vivier
Cc: Linux Kernel Mailing List, Alessandro Zummo, linux-rtc,
John Stultz, Arnd Bergmann, Daniel Lezcano, Jiaxun Yang,
Alexandre Belloni, linux-m68k, Thomas Gleixner, Stephen Boyd,
Geert Uytterhoeven
On Thu, Jan 20, 2022 at 9:03 AM Laurent Vivier <laurent@vivier.eu> wrote:
>
> Revert
> commit da31de35cd2f ("tty: goldfish: use __raw_writel()/__raw_readl()")
>
> to use accessors defined by the architecture.
>
> Define by default the accessor to be little-endian as we
> have only little-endian architectures using goldfish devices.
>
> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The patch looks good, but the description seems wrong to me:
Talking about "little-endian architectures" makes no sense here, the
point is that the device was clearly defined as having little-endian
registers, and your earlier patch broke this driver when running
on big-endian kernels (if anyone ever tried this).
This means you should also add
Cc: stable@vger.kernel.org # v5.11+
Fixes: da31de35cd2f ("tty: goldfish: use __raw_writel()/__raw_readl()")
The fact that m68k gets this wrong is just a bug in qemu, but it's
probably impossible to fix that since there is no way of knowing which
other operating systems have started relying on that bug over the years.
It might be a good idea to revisit the qemu implementation and make
sure that the extra byteswap is only inserted on m68k and not on
other targets, but hopefully there are no new targets based on goldfish
anymore and we don't need to care.
Arnd
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v11 2/5] tty: goldfish: introduce gf_ioread32()/gf_iowrite32()
2022-01-20 8:50 ` Arnd Bergmann
@ 2022-01-20 17:09 ` Laurent Vivier
0 siblings, 0 replies; 14+ messages in thread
From: Laurent Vivier @ 2022-01-20 17:09 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Linux Kernel Mailing List, Alessandro Zummo, linux-rtc,
John Stultz, Daniel Lezcano, Jiaxun Yang, Alexandre Belloni,
linux-m68k, Thomas Gleixner, Stephen Boyd, Geert Uytterhoeven
Le 20/01/2022 à 09:50, Arnd Bergmann a écrit :
> On Thu, Jan 20, 2022 at 9:03 AM Laurent Vivier <laurent@vivier.eu> wrote:
>>
>> Revert
>> commit da31de35cd2f ("tty: goldfish: use __raw_writel()/__raw_readl()")
>>
>> to use accessors defined by the architecture.
>>
>> Define by default the accessor to be little-endian as we
>> have only little-endian architectures using goldfish devices.
>>
>> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
>
> The patch looks good, but the description seems wrong to me:
>
> Talking about "little-endian architectures" makes no sense here, the
> point is that the device was clearly defined as having little-endian
> registers, and your earlier patch broke this driver when running
> on big-endian kernels (if anyone ever tried this).
To explain why I did that:
The reference document[1] doesn't define the endianness of goldfish.
In QEMU, goldfish devices are defined with the DEVICE_NATIVE_ENDIAN flag [2], that means all the
target architectures defined in QEMU with TARGET_WORDS_BIGENDIAN will present them as big-endian
devices, the others as little-endian devices.
According to TARGET_WORDS_BIGENDIAN definition:
On the following QEMU target architectures (qemu-system-XXX), goldfish devices must be accessed with
big-endian read/write:
mips, mips64, s390x, sparc, sparc64, or1k, m68k, ppc, ppc64, xtensaeb, hppa, sh4eb, microblaze
On the following QEMU target architectures, goldfish devices must be accessed with little-endian
read/write:
arm, aarch64, alpha, avr, cris, i386, x86_64, microblazeel, mipsel, mips64el, nios2, riscv32,
riscv64, rx, sh4, tricore, xtensa
Thanks,
Laurent
[1] https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT
[2]
https://android.googlesource.com/platform/external/qemu/+/refs/heads/emu-master-dev/hw/char/goldfish_tty.c#222
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32()
2022-01-20 8:03 ` [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32() Laurent Vivier
@ 2022-01-20 17:35 ` kernel test robot
2022-01-20 17:35 ` kernel test robot
1 sibling, 0 replies; 14+ messages in thread
From: kernel test robot @ 2022-01-20 17:35 UTC (permalink / raw)
To: Laurent Vivier, linux-kernel
Cc: llvm, kbuild-all, Alessandro Zummo, linux-rtc, John Stultz,
Arnd Bergmann, Daniel Lezcano, Jiaxun Yang, Alexandre Belloni,
linux-m68k, Thomas Gleixner
Hi Laurent,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on tip/timers/core]
[also build test ERROR on linux/master linus/master v5.16 next-20220120]
[cannot apply to geert-m68k/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
base: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git 35e13e9da9afbce13c1d36465504ece4e65f24fe
config: riscv-randconfig-r042-20220120 (https://download.01.org/0day-ci/archive/20220121/202201210103.XWJt8hcA-lkp@intel.com/config)
compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project f7b7138a62648f4019c55e4671682af1f851f295)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install riscv cross compiling tool for clang build
# apt-get install binutils-riscv64-linux-gnu
# https://github.com/0day-ci/linux/commit/82ea64fc7cab43e258085769ed1d90b0685bf091
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
git checkout 82ea64fc7cab43e258085769ed1d90b0685bf091
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=riscv SHELL=/bin/bash drivers/rtc/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> drivers/rtc/rtc-goldfish.c:44:18: error: implicit declaration of function 'gf_ioread32' [-Werror,-Wimplicit-function-declaration]
rtc_alarm_low = gf_ioread32(base + TIMER_ALARM_LOW);
^
drivers/rtc/rtc-goldfish.c:44:18: note: did you mean 'ioread32'?
include/asm-generic/io.h:726:19: note: 'ioread32' declared here
static inline u32 ioread32(const volatile void __iomem *addr)
^
include/asm-generic/io.h:725:18: note: expanded from macro 'ioread32'
#define ioread32 ioread32
^
>> drivers/rtc/rtc-goldfish.c:74:3: error: implicit declaration of function 'gf_iowrite32' [-Werror,-Wimplicit-function-declaration]
gf_iowrite32((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
^
drivers/rtc/rtc-goldfish.c:74:3: note: did you mean 'iowrite32'?
include/asm-generic/io.h:760:20: note: 'iowrite32' declared here
static inline void iowrite32(u32 value, volatile void __iomem *addr)
^
include/asm-generic/io.h:759:19: note: expanded from macro 'iowrite32'
#define iowrite32 iowrite32
^
drivers/rtc/rtc-goldfish.c:83:20: error: implicit declaration of function 'gf_ioread32' [-Werror,-Wimplicit-function-declaration]
rtc_status_reg = gf_ioread32(base + TIMER_ALARM_STATUS);
^
drivers/rtc/rtc-goldfish.c:85:4: error: implicit declaration of function 'gf_iowrite32' [-Werror,-Wimplicit-function-declaration]
gf_iowrite32(1, base + TIMER_CLEAR_ALARM);
^
drivers/rtc/rtc-goldfish.c:101:3: error: implicit declaration of function 'gf_iowrite32' [-Werror,-Wimplicit-function-declaration]
gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
^
drivers/rtc/rtc-goldfish.c:113:2: error: implicit declaration of function 'gf_iowrite32' [-Werror,-Wimplicit-function-declaration]
gf_iowrite32(1, base + TIMER_CLEAR_INTERRUPT);
^
drivers/rtc/rtc-goldfish.c:131:13: error: implicit declaration of function 'gf_ioread32' [-Werror,-Wimplicit-function-declaration]
time_low = gf_ioread32(base + TIMER_TIME_LOW);
^
drivers/rtc/rtc-goldfish.c:152:2: error: implicit declaration of function 'gf_iowrite32' [-Werror,-Wimplicit-function-declaration]
gf_iowrite32((now64 >> 32), base + TIMER_TIME_HIGH);
^
8 errors generated.
vim +/gf_ioread32 +44 drivers/rtc/rtc-goldfish.c
31
32 static int goldfish_rtc_read_alarm(struct device *dev,
33 struct rtc_wkalrm *alrm)
34 {
35 u64 rtc_alarm;
36 u64 rtc_alarm_low;
37 u64 rtc_alarm_high;
38 void __iomem *base;
39 struct goldfish_rtc *rtcdrv;
40
41 rtcdrv = dev_get_drvdata(dev);
42 base = rtcdrv->base;
43
> 44 rtc_alarm_low = gf_ioread32(base + TIMER_ALARM_LOW);
45 rtc_alarm_high = gf_ioread32(base + TIMER_ALARM_HIGH);
46 rtc_alarm = (rtc_alarm_high << 32) | rtc_alarm_low;
47
48 do_div(rtc_alarm, NSEC_PER_SEC);
49 memset(alrm, 0, sizeof(struct rtc_wkalrm));
50
51 rtc_time64_to_tm(rtc_alarm, &alrm->time);
52
53 if (gf_ioread32(base + TIMER_ALARM_STATUS))
54 alrm->enabled = 1;
55 else
56 alrm->enabled = 0;
57
58 return 0;
59 }
60
61 static int goldfish_rtc_set_alarm(struct device *dev,
62 struct rtc_wkalrm *alrm)
63 {
64 struct goldfish_rtc *rtcdrv;
65 u64 rtc_alarm64;
66 u64 rtc_status_reg;
67 void __iomem *base;
68
69 rtcdrv = dev_get_drvdata(dev);
70 base = rtcdrv->base;
71
72 if (alrm->enabled) {
73 rtc_alarm64 = rtc_tm_to_time64(&alrm->time) * NSEC_PER_SEC;
> 74 gf_iowrite32((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
75 gf_iowrite32(rtc_alarm64, base + TIMER_ALARM_LOW);
76 gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
77 } else {
78 /*
79 * if this function was called with enabled=0
80 * then it could mean that the application is
81 * trying to cancel an ongoing alarm
82 */
83 rtc_status_reg = gf_ioread32(base + TIMER_ALARM_STATUS);
84 if (rtc_status_reg)
85 gf_iowrite32(1, base + TIMER_CLEAR_ALARM);
86 }
87
88 return 0;
89 }
90
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32()
@ 2022-01-20 17:35 ` kernel test robot
0 siblings, 0 replies; 14+ messages in thread
From: kernel test robot @ 2022-01-20 17:35 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 6501 bytes --]
Hi Laurent,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on tip/timers/core]
[also build test ERROR on linux/master linus/master v5.16 next-20220120]
[cannot apply to geert-m68k/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
base: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git 35e13e9da9afbce13c1d36465504ece4e65f24fe
config: riscv-randconfig-r042-20220120 (https://download.01.org/0day-ci/archive/20220121/202201210103.XWJt8hcA-lkp(a)intel.com/config)
compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project f7b7138a62648f4019c55e4671682af1f851f295)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install riscv cross compiling tool for clang build
# apt-get install binutils-riscv64-linux-gnu
# https://github.com/0day-ci/linux/commit/82ea64fc7cab43e258085769ed1d90b0685bf091
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
git checkout 82ea64fc7cab43e258085769ed1d90b0685bf091
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=riscv SHELL=/bin/bash drivers/rtc/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> drivers/rtc/rtc-goldfish.c:44:18: error: implicit declaration of function 'gf_ioread32' [-Werror,-Wimplicit-function-declaration]
rtc_alarm_low = gf_ioread32(base + TIMER_ALARM_LOW);
^
drivers/rtc/rtc-goldfish.c:44:18: note: did you mean 'ioread32'?
include/asm-generic/io.h:726:19: note: 'ioread32' declared here
static inline u32 ioread32(const volatile void __iomem *addr)
^
include/asm-generic/io.h:725:18: note: expanded from macro 'ioread32'
#define ioread32 ioread32
^
>> drivers/rtc/rtc-goldfish.c:74:3: error: implicit declaration of function 'gf_iowrite32' [-Werror,-Wimplicit-function-declaration]
gf_iowrite32((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
^
drivers/rtc/rtc-goldfish.c:74:3: note: did you mean 'iowrite32'?
include/asm-generic/io.h:760:20: note: 'iowrite32' declared here
static inline void iowrite32(u32 value, volatile void __iomem *addr)
^
include/asm-generic/io.h:759:19: note: expanded from macro 'iowrite32'
#define iowrite32 iowrite32
^
drivers/rtc/rtc-goldfish.c:83:20: error: implicit declaration of function 'gf_ioread32' [-Werror,-Wimplicit-function-declaration]
rtc_status_reg = gf_ioread32(base + TIMER_ALARM_STATUS);
^
drivers/rtc/rtc-goldfish.c:85:4: error: implicit declaration of function 'gf_iowrite32' [-Werror,-Wimplicit-function-declaration]
gf_iowrite32(1, base + TIMER_CLEAR_ALARM);
^
drivers/rtc/rtc-goldfish.c:101:3: error: implicit declaration of function 'gf_iowrite32' [-Werror,-Wimplicit-function-declaration]
gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
^
drivers/rtc/rtc-goldfish.c:113:2: error: implicit declaration of function 'gf_iowrite32' [-Werror,-Wimplicit-function-declaration]
gf_iowrite32(1, base + TIMER_CLEAR_INTERRUPT);
^
drivers/rtc/rtc-goldfish.c:131:13: error: implicit declaration of function 'gf_ioread32' [-Werror,-Wimplicit-function-declaration]
time_low = gf_ioread32(base + TIMER_TIME_LOW);
^
drivers/rtc/rtc-goldfish.c:152:2: error: implicit declaration of function 'gf_iowrite32' [-Werror,-Wimplicit-function-declaration]
gf_iowrite32((now64 >> 32), base + TIMER_TIME_HIGH);
^
8 errors generated.
vim +/gf_ioread32 +44 drivers/rtc/rtc-goldfish.c
31
32 static int goldfish_rtc_read_alarm(struct device *dev,
33 struct rtc_wkalrm *alrm)
34 {
35 u64 rtc_alarm;
36 u64 rtc_alarm_low;
37 u64 rtc_alarm_high;
38 void __iomem *base;
39 struct goldfish_rtc *rtcdrv;
40
41 rtcdrv = dev_get_drvdata(dev);
42 base = rtcdrv->base;
43
> 44 rtc_alarm_low = gf_ioread32(base + TIMER_ALARM_LOW);
45 rtc_alarm_high = gf_ioread32(base + TIMER_ALARM_HIGH);
46 rtc_alarm = (rtc_alarm_high << 32) | rtc_alarm_low;
47
48 do_div(rtc_alarm, NSEC_PER_SEC);
49 memset(alrm, 0, sizeof(struct rtc_wkalrm));
50
51 rtc_time64_to_tm(rtc_alarm, &alrm->time);
52
53 if (gf_ioread32(base + TIMER_ALARM_STATUS))
54 alrm->enabled = 1;
55 else
56 alrm->enabled = 0;
57
58 return 0;
59 }
60
61 static int goldfish_rtc_set_alarm(struct device *dev,
62 struct rtc_wkalrm *alrm)
63 {
64 struct goldfish_rtc *rtcdrv;
65 u64 rtc_alarm64;
66 u64 rtc_status_reg;
67 void __iomem *base;
68
69 rtcdrv = dev_get_drvdata(dev);
70 base = rtcdrv->base;
71
72 if (alrm->enabled) {
73 rtc_alarm64 = rtc_tm_to_time64(&alrm->time) * NSEC_PER_SEC;
> 74 gf_iowrite32((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
75 gf_iowrite32(rtc_alarm64, base + TIMER_ALARM_LOW);
76 gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
77 } else {
78 /*
79 * if this function was called with enabled=0
80 * then it could mean that the application is
81 * trying to cancel an ongoing alarm
82 */
83 rtc_status_reg = gf_ioread32(base + TIMER_ALARM_STATUS);
84 if (rtc_status_reg)
85 gf_iowrite32(1, base + TIMER_CLEAR_ALARM);
86 }
87
88 return 0;
89 }
90
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32()
2022-01-20 8:03 ` [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32() Laurent Vivier
@ 2022-01-20 17:35 ` kernel test robot
2022-01-20 17:35 ` kernel test robot
1 sibling, 0 replies; 14+ messages in thread
From: kernel test robot @ 2022-01-20 17:35 UTC (permalink / raw)
To: Laurent Vivier, linux-kernel
Cc: kbuild-all, Alessandro Zummo, linux-rtc, John Stultz,
Arnd Bergmann, Daniel Lezcano, Jiaxun Yang, Alexandre Belloni,
linux-m68k, Thomas Gleixner
Hi Laurent,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on tip/timers/core]
[also build test ERROR on linux/master linus/master v5.16 next-20220120]
[cannot apply to geert-m68k/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
base: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git 35e13e9da9afbce13c1d36465504ece4e65f24fe
config: nds32-randconfig-r014-20220120 (https://download.01.org/0day-ci/archive/20220121/202201210131.XfhBEwfV-lkp@intel.com/config)
compiler: nds32le-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/82ea64fc7cab43e258085769ed1d90b0685bf091
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
git checkout 82ea64fc7cab43e258085769ed1d90b0685bf091
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=nds32 SHELL=/bin/bash drivers/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/rtc/rtc-goldfish.c: In function 'goldfish_rtc_read_alarm':
>> drivers/rtc/rtc-goldfish.c:44:25: error: implicit declaration of function 'gf_ioread32'; did you mean 'ioread32'? [-Werror=implicit-function-declaration]
44 | rtc_alarm_low = gf_ioread32(base + TIMER_ALARM_LOW);
| ^~~~~~~~~~~
| ioread32
drivers/rtc/rtc-goldfish.c: In function 'goldfish_rtc_set_alarm':
>> drivers/rtc/rtc-goldfish.c:74:17: error: implicit declaration of function 'gf_iowrite32'; did you mean 'iowrite32'? [-Werror=implicit-function-declaration]
74 | gf_iowrite32((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
| ^~~~~~~~~~~~
| iowrite32
cc1: some warnings being treated as errors
vim +44 drivers/rtc/rtc-goldfish.c
31
32 static int goldfish_rtc_read_alarm(struct device *dev,
33 struct rtc_wkalrm *alrm)
34 {
35 u64 rtc_alarm;
36 u64 rtc_alarm_low;
37 u64 rtc_alarm_high;
38 void __iomem *base;
39 struct goldfish_rtc *rtcdrv;
40
41 rtcdrv = dev_get_drvdata(dev);
42 base = rtcdrv->base;
43
> 44 rtc_alarm_low = gf_ioread32(base + TIMER_ALARM_LOW);
45 rtc_alarm_high = gf_ioread32(base + TIMER_ALARM_HIGH);
46 rtc_alarm = (rtc_alarm_high << 32) | rtc_alarm_low;
47
48 do_div(rtc_alarm, NSEC_PER_SEC);
49 memset(alrm, 0, sizeof(struct rtc_wkalrm));
50
51 rtc_time64_to_tm(rtc_alarm, &alrm->time);
52
53 if (gf_ioread32(base + TIMER_ALARM_STATUS))
54 alrm->enabled = 1;
55 else
56 alrm->enabled = 0;
57
58 return 0;
59 }
60
61 static int goldfish_rtc_set_alarm(struct device *dev,
62 struct rtc_wkalrm *alrm)
63 {
64 struct goldfish_rtc *rtcdrv;
65 u64 rtc_alarm64;
66 u64 rtc_status_reg;
67 void __iomem *base;
68
69 rtcdrv = dev_get_drvdata(dev);
70 base = rtcdrv->base;
71
72 if (alrm->enabled) {
73 rtc_alarm64 = rtc_tm_to_time64(&alrm->time) * NSEC_PER_SEC;
> 74 gf_iowrite32((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
75 gf_iowrite32(rtc_alarm64, base + TIMER_ALARM_LOW);
76 gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
77 } else {
78 /*
79 * if this function was called with enabled=0
80 * then it could mean that the application is
81 * trying to cancel an ongoing alarm
82 */
83 rtc_status_reg = gf_ioread32(base + TIMER_ALARM_STATUS);
84 if (rtc_status_reg)
85 gf_iowrite32(1, base + TIMER_CLEAR_ALARM);
86 }
87
88 return 0;
89 }
90
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32()
@ 2022-01-20 17:35 ` kernel test robot
0 siblings, 0 replies; 14+ messages in thread
From: kernel test robot @ 2022-01-20 17:35 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 4581 bytes --]
Hi Laurent,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on tip/timers/core]
[also build test ERROR on linux/master linus/master v5.16 next-20220120]
[cannot apply to geert-m68k/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
base: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git 35e13e9da9afbce13c1d36465504ece4e65f24fe
config: nds32-randconfig-r014-20220120 (https://download.01.org/0day-ci/archive/20220121/202201210131.XfhBEwfV-lkp(a)intel.com/config)
compiler: nds32le-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/82ea64fc7cab43e258085769ed1d90b0685bf091
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
git checkout 82ea64fc7cab43e258085769ed1d90b0685bf091
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=nds32 SHELL=/bin/bash drivers/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/rtc/rtc-goldfish.c: In function 'goldfish_rtc_read_alarm':
>> drivers/rtc/rtc-goldfish.c:44:25: error: implicit declaration of function 'gf_ioread32'; did you mean 'ioread32'? [-Werror=implicit-function-declaration]
44 | rtc_alarm_low = gf_ioread32(base + TIMER_ALARM_LOW);
| ^~~~~~~~~~~
| ioread32
drivers/rtc/rtc-goldfish.c: In function 'goldfish_rtc_set_alarm':
>> drivers/rtc/rtc-goldfish.c:74:17: error: implicit declaration of function 'gf_iowrite32'; did you mean 'iowrite32'? [-Werror=implicit-function-declaration]
74 | gf_iowrite32((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
| ^~~~~~~~~~~~
| iowrite32
cc1: some warnings being treated as errors
vim +44 drivers/rtc/rtc-goldfish.c
31
32 static int goldfish_rtc_read_alarm(struct device *dev,
33 struct rtc_wkalrm *alrm)
34 {
35 u64 rtc_alarm;
36 u64 rtc_alarm_low;
37 u64 rtc_alarm_high;
38 void __iomem *base;
39 struct goldfish_rtc *rtcdrv;
40
41 rtcdrv = dev_get_drvdata(dev);
42 base = rtcdrv->base;
43
> 44 rtc_alarm_low = gf_ioread32(base + TIMER_ALARM_LOW);
45 rtc_alarm_high = gf_ioread32(base + TIMER_ALARM_HIGH);
46 rtc_alarm = (rtc_alarm_high << 32) | rtc_alarm_low;
47
48 do_div(rtc_alarm, NSEC_PER_SEC);
49 memset(alrm, 0, sizeof(struct rtc_wkalrm));
50
51 rtc_time64_to_tm(rtc_alarm, &alrm->time);
52
53 if (gf_ioread32(base + TIMER_ALARM_STATUS))
54 alrm->enabled = 1;
55 else
56 alrm->enabled = 0;
57
58 return 0;
59 }
60
61 static int goldfish_rtc_set_alarm(struct device *dev,
62 struct rtc_wkalrm *alrm)
63 {
64 struct goldfish_rtc *rtcdrv;
65 u64 rtc_alarm64;
66 u64 rtc_status_reg;
67 void __iomem *base;
68
69 rtcdrv = dev_get_drvdata(dev);
70 base = rtcdrv->base;
71
72 if (alrm->enabled) {
73 rtc_alarm64 = rtc_tm_to_time64(&alrm->time) * NSEC_PER_SEC;
> 74 gf_iowrite32((rtc_alarm64 >> 32), base + TIMER_ALARM_HIGH);
75 gf_iowrite32(rtc_alarm64, base + TIMER_ALARM_LOW);
76 gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
77 } else {
78 /*
79 * if this function was called with enabled=0
80 * then it could mean that the application is
81 * trying to cancel an ongoing alarm
82 */
83 rtc_status_reg = gf_ioread32(base + TIMER_ALARM_STATUS);
84 if (rtc_status_reg)
85 gf_iowrite32(1, base + TIMER_CLEAR_ALARM);
86 }
87
88 return 0;
89 }
90
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v11 4/5] clocksource/drivers: Add a goldfish-timer clocksource
2022-01-20 8:03 ` [PATCH v11 4/5] clocksource/drivers: Add a goldfish-timer clocksource Laurent Vivier
@ 2022-01-21 12:23 ` kernel test robot
0 siblings, 0 replies; 14+ messages in thread
From: kernel test robot @ 2022-01-21 12:23 UTC (permalink / raw)
To: Laurent Vivier, linux-kernel
Cc: kbuild-all, Alessandro Zummo, linux-rtc, John Stultz,
Arnd Bergmann, Daniel Lezcano, Jiaxun Yang, Alexandre Belloni,
linux-m68k, Thomas Gleixner
Hi Laurent,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on tip/timers/core]
[also build test ERROR on linux/master linus/master next-20220121]
[cannot apply to geert-m68k/for-next v5.16]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
base: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git 35e13e9da9afbce13c1d36465504ece4e65f24fe
config: arc-allyesconfig (https://download.01.org/0day-ci/archive/20220121/202201212032.qL41ty3V-lkp@intel.com/config)
compiler: arceb-elf-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/ea1170b472532011ab0c8208b6414a36810f45ab
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
git checkout ea1170b472532011ab0c8208b6414a36810f45ab
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arc SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/clocksource/timer-goldfish.c: In function 'goldfish_timer_read':
>> drivers/clocksource/timer-goldfish.c:52:20: error: implicit declaration of function 'gf_ioread32'; did you mean 'ioread32'? [-Werror=implicit-function-declaration]
52 | time_low = gf_ioread32(base + TIMER_TIME_LOW);
| ^~~~~~~~~~~
| ioread32
drivers/clocksource/timer-goldfish.c: In function 'goldfish_timer_set_oneshot':
>> drivers/clocksource/timer-goldfish.c:65:9: error: implicit declaration of function 'gf_iowrite32'; did you mean 'iowrite32'? [-Werror=implicit-function-declaration]
65 | gf_iowrite32(0, base + TIMER_ALARM_HIGH);
| ^~~~~~~~~~~~
| iowrite32
cc1: some warnings being treated as errors
vim +52 drivers/clocksource/timer-goldfish.c
40
41 static u64 goldfish_timer_read(struct clocksource *cs)
42 {
43 struct goldfish_timer *timerdrv = cs_to_gf(cs);
44 void __iomem *base = timerdrv->base;
45 u32 time_low, time_high;
46 u64 ticks;
47
48 /*
49 * time_low: get low bits of current time and update time_high
50 * time_high: get high bits of time at last time_low read
51 */
> 52 time_low = gf_ioread32(base + TIMER_TIME_LOW);
53 time_high = gf_ioread32(base + TIMER_TIME_HIGH);
54
55 ticks = ((u64)time_high << 32) | time_low;
56
57 return ticks;
58 }
59
60 static int goldfish_timer_set_oneshot(struct clock_event_device *evt)
61 {
62 struct goldfish_timer *timerdrv = ced_to_gf(evt);
63 void __iomem *base = timerdrv->base;
64
> 65 gf_iowrite32(0, base + TIMER_ALARM_HIGH);
66 gf_iowrite32(0, base + TIMER_ALARM_LOW);
67 gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
68
69 return 0;
70 }
71
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v11 4/5] clocksource/drivers: Add a goldfish-timer clocksource
@ 2022-01-21 12:23 ` kernel test robot
0 siblings, 0 replies; 14+ messages in thread
From: kernel test robot @ 2022-01-21 12:23 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 3675 bytes --]
Hi Laurent,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on tip/timers/core]
[also build test ERROR on linux/master linus/master next-20220121]
[cannot apply to geert-m68k/for-next v5.16]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
base: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git 35e13e9da9afbce13c1d36465504ece4e65f24fe
config: arc-allyesconfig (https://download.01.org/0day-ci/archive/20220121/202201212032.qL41ty3V-lkp(a)intel.com/config)
compiler: arceb-elf-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/ea1170b472532011ab0c8208b6414a36810f45ab
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Laurent-Vivier/m68k-Add-Virtual-M68k-Machine/20220120-160832
git checkout ea1170b472532011ab0c8208b6414a36810f45ab
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=arc SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
drivers/clocksource/timer-goldfish.c: In function 'goldfish_timer_read':
>> drivers/clocksource/timer-goldfish.c:52:20: error: implicit declaration of function 'gf_ioread32'; did you mean 'ioread32'? [-Werror=implicit-function-declaration]
52 | time_low = gf_ioread32(base + TIMER_TIME_LOW);
| ^~~~~~~~~~~
| ioread32
drivers/clocksource/timer-goldfish.c: In function 'goldfish_timer_set_oneshot':
>> drivers/clocksource/timer-goldfish.c:65:9: error: implicit declaration of function 'gf_iowrite32'; did you mean 'iowrite32'? [-Werror=implicit-function-declaration]
65 | gf_iowrite32(0, base + TIMER_ALARM_HIGH);
| ^~~~~~~~~~~~
| iowrite32
cc1: some warnings being treated as errors
vim +52 drivers/clocksource/timer-goldfish.c
40
41 static u64 goldfish_timer_read(struct clocksource *cs)
42 {
43 struct goldfish_timer *timerdrv = cs_to_gf(cs);
44 void __iomem *base = timerdrv->base;
45 u32 time_low, time_high;
46 u64 ticks;
47
48 /*
49 * time_low: get low bits of current time and update time_high
50 * time_high: get high bits of time at last time_low read
51 */
> 52 time_low = gf_ioread32(base + TIMER_TIME_LOW);
53 time_high = gf_ioread32(base + TIMER_TIME_HIGH);
54
55 ticks = ((u64)time_high << 32) | time_low;
56
57 return ticks;
58 }
59
60 static int goldfish_timer_set_oneshot(struct clock_event_device *evt)
61 {
62 struct goldfish_timer *timerdrv = ced_to_gf(evt);
63 void __iomem *base = timerdrv->base;
64
> 65 gf_iowrite32(0, base + TIMER_ALARM_HIGH);
66 gf_iowrite32(0, base + TIMER_ALARM_LOW);
67 gf_iowrite32(1, base + TIMER_IRQ_ENABLED);
68
69 return 0;
70 }
71
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2022-01-21 12:24 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-20 8:03 [PATCH v11 0/5] m68k: Add Virtual M68k Machine Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 1/5] m68k: add asm/config.h Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 2/5] tty: goldfish: introduce gf_ioread32()/gf_iowrite32() Laurent Vivier
2022-01-20 8:50 ` Arnd Bergmann
2022-01-20 17:09 ` Laurent Vivier
2022-01-20 8:03 ` [PATCH v11 3/5] rtc: goldfish: use gf_ioread32()/gf_iowrite32() Laurent Vivier
2022-01-20 17:35 ` kernel test robot
2022-01-20 17:35 ` kernel test robot
2022-01-20 17:35 ` kernel test robot
2022-01-20 17:35 ` kernel test robot
2022-01-20 8:03 ` [PATCH v11 4/5] clocksource/drivers: Add a goldfish-timer clocksource Laurent Vivier
2022-01-21 12:23 ` kernel test robot
2022-01-21 12:23 ` kernel test robot
2022-01-20 8:03 ` [PATCH v11 5/5] m68k: introduce a virtual m68k machine Laurent Vivier
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.