From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754110AbcEPQJG (ORCPT ); Mon, 16 May 2016 12:09:06 -0400 Received: from mail-io0-f172.google.com ([209.85.223.172]:35288 "EHLO mail-io0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752202AbcEPQJE (ORCPT ); Mon, 16 May 2016 12:09:04 -0400 MIME-Version: 1.0 In-Reply-To: <573937A7.9010405@oracle.com> References: <1463118995-31763-1-git-send-email-ethan.zhao@oracle.com> <573937A7.9010405@oracle.com> Date: Mon, 16 May 2016 09:09:02 -0700 Message-ID: Subject: Re: [PATCH] ixgbe: take online CPU number as MQ max limit when alloc_etherdev_mq() From: Alexander Duyck To: ethan zhao Cc: Jeff Kirsher , "Brandeburg, Jesse" , shannon nelson , Carolyn Wyborny , "Skidmore, Donald C" , Bruce W Allan , John Ronciak , Mitch Williams , intel-wired-lan , Netdev , "linux-kernel@vger.kernel.org" , Ethan Zhao Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sun, May 15, 2016 at 7:59 PM, ethan zhao wrote: > Alexander, > > On 2016/5/14 0:46, Alexander Duyck wrote: >> >> On Thu, May 12, 2016 at 10:56 PM, Ethan Zhao >> wrote: >>> >>> Allocating 64 Tx/Rx as default doesn't benefit perfomrnace when less >>> CPUs were assigned. especially when DCB is enabled, so we should take >>> num_online_cpus() as top limit, and aslo to make sure every TC has >>> at least one queue, take the MAX_TRAFFIC_CLASS as bottom limit of queues >>> number. >>> >>> Signed-off-by: Ethan Zhao >> >> What is the harm in allowing the user to specify up to 64 queues if >> they want to? Also what is your opinion based on? In the case of RSS > > > There is no module parameter to specify queue number in this upstream ixgbe > driver. for what to specify more queues than num_online_cpus() via > ethtool ? > I couldn't figure out the benefit to do that. There are a number of benefits to being able to set the number of queues based on the user desire. Just because you can't figure out how to use a feature is no reason to break it so that nobody else can. > But if DCB is turned on after loading, the queues would be 64/64, that > doesn't > make sense if only 16 CPUs assigned. It makes perfect sense. What is happening is that it is allocating an RSS set per TC. So what you should have is either 4 queues per CPU with each one belonging to a different TC, or 4 queues per CPU with the first 8 CPUs covering TCs 0-3, and the last 8 CPUs covering TCs 4-7. I can see how the last setup might actually be a bit confusing. To that end you might consider modifying ixgbe_acquire_msix_vectors uses the number of RSS queues instead of the number of Rx queues in the case of DCB. Then you would get more consistent behavior with each q_vector or CPU (if num_q_vecotrs == num_online_cpus()) having one queue belonging to each TC. You would end up with either 8 or 16 q_vectors hosting 8 or 4 queues so that they can process DCB requests without having to worry about head of line blocking. >> traffic the upper limit is only 16 on older NICs, but last I knew the >> latest X550 can support more queues for RSS. Have you only been >> testing on older NICs or did you test on the latest hardware as well? > > More queues for RSS than num_online_cpus() could bring better performance > ? > Test result shows false result. even memory cost is not an issue for most > of > the expensive servers, but not for all. The feature is called DCB. What it allows for is the avoidance of head-of-line blocking. So when you have DCB enabled you should have a set of queues for each possible RSS result so that if you get a higher priority request on one of the queues it can use the higher priority queue instead of having to rely on the the lower priority queue to receive traffic. You cannot do that without allocating a queue for each TC, and reducing the number of RSS queues supported on the system will hurt performance. Therefore on a 16 CPU system it is very useful to be able to allocate 4 queues per RSS flow as that way you get optimal CPU distribution and can still avoid head-of-line blocking via DCB. >> >> If you want to control the number of queues allocated in a given >> configuration you should look at the code over in the ixgbe_lib.c, not > > Yes, RSS, RSS with SRIOV, FCoE, DCB etc uses different queues > calculation algorithm. > But they all take the dev queues allocated in alloc_etherdev_mq() as upper > limit. > > If we set 64 as default here, DCB would says "oh, there is 64 there, I > could use it" Right. But the deciding factor for DCB is RSS which is already limited by the number of CPUs. If it is allocating 64 queues it is because there are either at least 8 CPUs present and 8 TCs being allocated per CPU, or there are at least 16 queues present and it is allocating 4 TCs per CPU. >> >> ixgbe_main.c. All you are doing with this patch is denying the user >> choice with this change as they then are not allowed to set more > > Yes, it is purposed to deny configuration that doesn't benefit. Doesn't benefit who? It is obvious you don't understand how DCB is meant to work since you are assuming the queues are throw-away. Anyone who makes use of the ability to prioritize their traffic would likely have a different opinion. >> queues. Even if they find your decision was wrong for their >> configuration. >> >> - Alex >> > Thanks, > Ethan Your response clearly points out you don't understand DCB. I suggest you take another look at how things are actually being configured. I believe what you will find is that the current implementation is basing things on the number of online CPUs already based on the ring_feature[RING_F_RSS].limit value. All that is happening is that you are getting that value multiplied by the number of TCs and the RSS value is reduced if the result is greater than 64 based on the maximum number of queues. With your code on an 8 core system you go from being able to perform RSS over 8 queues to only being able to perform RSS over 1 queue when you enable DCB. There was a bug a long time ago where this actually didn't provide any gain because the interrupt allocation was binding all 8 RSS queues to a single q_vector, but that has long since been fixed and what you should be seeing is that RSS will spread traffic across either 8 or 16 queues when DCB is enabled in either 8 or 4 TC mode. My advice would be to use a netperf TCP_CRR test and watch what queues and what interrupts traffic is being delivered to. Then if you have DCB enabled on both ends you might try changing the priority of your netperf session and watch what happens when you switch between TCs. What you should find is that you will shift between groups of queues and as you do so you should not have any active queues overlapping unless you have less interrupts than CPUs. - Alex From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexander Duyck Date: Mon, 16 May 2016 09:09:02 -0700 Subject: [Intel-wired-lan] [PATCH] ixgbe: take online CPU number as MQ max limit when alloc_etherdev_mq() In-Reply-To: <573937A7.9010405@oracle.com> References: <1463118995-31763-1-git-send-email-ethan.zhao@oracle.com> <573937A7.9010405@oracle.com> Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: intel-wired-lan@osuosl.org List-ID: On Sun, May 15, 2016 at 7:59 PM, ethan zhao wrote: > Alexander, > > On 2016/5/14 0:46, Alexander Duyck wrote: >> >> On Thu, May 12, 2016 at 10:56 PM, Ethan Zhao >> wrote: >>> >>> Allocating 64 Tx/Rx as default doesn't benefit perfomrnace when less >>> CPUs were assigned. especially when DCB is enabled, so we should take >>> num_online_cpus() as top limit, and aslo to make sure every TC has >>> at least one queue, take the MAX_TRAFFIC_CLASS as bottom limit of queues >>> number. >>> >>> Signed-off-by: Ethan Zhao >> >> What is the harm in allowing the user to specify up to 64 queues if >> they want to? Also what is your opinion based on? In the case of RSS > > > There is no module parameter to specify queue number in this upstream ixgbe > driver. for what to specify more queues than num_online_cpus() via > ethtool ? > I couldn't figure out the benefit to do that. There are a number of benefits to being able to set the number of queues based on the user desire. Just because you can't figure out how to use a feature is no reason to break it so that nobody else can. > But if DCB is turned on after loading, the queues would be 64/64, that > doesn't > make sense if only 16 CPUs assigned. It makes perfect sense. What is happening is that it is allocating an RSS set per TC. So what you should have is either 4 queues per CPU with each one belonging to a different TC, or 4 queues per CPU with the first 8 CPUs covering TCs 0-3, and the last 8 CPUs covering TCs 4-7. I can see how the last setup might actually be a bit confusing. To that end you might consider modifying ixgbe_acquire_msix_vectors uses the number of RSS queues instead of the number of Rx queues in the case of DCB. Then you would get more consistent behavior with each q_vector or CPU (if num_q_vecotrs == num_online_cpus()) having one queue belonging to each TC. You would end up with either 8 or 16 q_vectors hosting 8 or 4 queues so that they can process DCB requests without having to worry about head of line blocking. >> traffic the upper limit is only 16 on older NICs, but last I knew the >> latest X550 can support more queues for RSS. Have you only been >> testing on older NICs or did you test on the latest hardware as well? > > More queues for RSS than num_online_cpus() could bring better performance > ? > Test result shows false result. even memory cost is not an issue for most > of > the expensive servers, but not for all. The feature is called DCB. What it allows for is the avoidance of head-of-line blocking. So when you have DCB enabled you should have a set of queues for each possible RSS result so that if you get a higher priority request on one of the queues it can use the higher priority queue instead of having to rely on the the lower priority queue to receive traffic. You cannot do that without allocating a queue for each TC, and reducing the number of RSS queues supported on the system will hurt performance. Therefore on a 16 CPU system it is very useful to be able to allocate 4 queues per RSS flow as that way you get optimal CPU distribution and can still avoid head-of-line blocking via DCB. >> >> If you want to control the number of queues allocated in a given >> configuration you should look at the code over in the ixgbe_lib.c, not > > Yes, RSS, RSS with SRIOV, FCoE, DCB etc uses different queues > calculation algorithm. > But they all take the dev queues allocated in alloc_etherdev_mq() as upper > limit. > > If we set 64 as default here, DCB would says "oh, there is 64 there, I > could use it" Right. But the deciding factor for DCB is RSS which is already limited by the number of CPUs. If it is allocating 64 queues it is because there are either at least 8 CPUs present and 8 TCs being allocated per CPU, or there are at least 16 queues present and it is allocating 4 TCs per CPU. >> >> ixgbe_main.c. All you are doing with this patch is denying the user >> choice with this change as they then are not allowed to set more > > Yes, it is purposed to deny configuration that doesn't benefit. Doesn't benefit who? It is obvious you don't understand how DCB is meant to work since you are assuming the queues are throw-away. Anyone who makes use of the ability to prioritize their traffic would likely have a different opinion. >> queues. Even if they find your decision was wrong for their >> configuration. >> >> - Alex >> > Thanks, > Ethan Your response clearly points out you don't understand DCB. I suggest you take another look at how things are actually being configured. I believe what you will find is that the current implementation is basing things on the number of online CPUs already based on the ring_feature[RING_F_RSS].limit value. All that is happening is that you are getting that value multiplied by the number of TCs and the RSS value is reduced if the result is greater than 64 based on the maximum number of queues. With your code on an 8 core system you go from being able to perform RSS over 8 queues to only being able to perform RSS over 1 queue when you enable DCB. There was a bug a long time ago where this actually didn't provide any gain because the interrupt allocation was binding all 8 RSS queues to a single q_vector, but that has long since been fixed and what you should be seeing is that RSS will spread traffic across either 8 or 16 queues when DCB is enabled in either 8 or 4 TC mode. My advice would be to use a netperf TCP_CRR test and watch what queues and what interrupts traffic is being delivered to. Then if you have DCB enabled on both ends you might try changing the priority of your netperf session and watch what happens when you switch between TCs. What you should find is that you will shift between groups of queues and as you do so you should not have any active queues overlapping unless you have less interrupts than CPUs. - Alex