From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alistair Francis Date: Tue, 15 Jun 2021 17:57:14 +1000 Subject: [Buildroot] [PATCH 4/4] configs/beaglev: switch to upstream opensbi generic platform In-Reply-To: <20210615001750.421889-5-drew@beagleboard.org> References: <20210615001750.421889-1-drew@beagleboard.org> <20210615001750.421889-5-drew@beagleboard.org> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Tue, Jun 15, 2021 at 10:19 AM Drew Fustini wrote: > > Switch from the starfive-tech opensbi to upstream repo and use generic > platform now that it supports the console uart [1]. This landed after > the 0.9 release [2], so the current head of master branch is used [3]. > > FW_FDT_PATH is set to u-boot.dtb so that the device tree from u-boot > will be included in the OpenSBI build [4]. Note that u-boot must have > CONFIG_OF_SEPARATE enabled for u-boot to build u-boot.dtb [5]. > > [1] https://github.com/riscv/opensbi/commit/e822b7504df0583a6a227d51cb7da8ea9fc79c0a > [2] https://github.com/riscv/opensbi/commit/234ed8e427f4d92903123199f6590d144e0d9351 > [3] https://github.com/riscv/opensbi/commit/79f9b4220ffa7f74356054be25d450d7958bf16c > [4] https://github.com/riscv/opensbi/blob/master/docs/firmware/fw.md > [5] https://github.com/lentinj/u-boot/blob/master/doc/README.fdt-control > > Signed-off-by: Drew Fustini Reviewed-by: Alistair Francis Alistair > --- > configs/beaglev_defconfig | 8 +++++--- > 1 file changed, 5 insertions(+), 3 deletions(-) > > diff --git a/configs/beaglev_defconfig b/configs/beaglev_defconfig > index fcbea2cdec86..29e3a52be36c 100644 > --- a/configs/beaglev_defconfig > +++ b/configs/beaglev_defconfig > @@ -23,17 +23,19 @@ BR2_TARGET_BEAGLEV_DDRINIT=y > BR2_TARGET_BEAGLEV_SECONDBOOT=y > BR2_TARGET_OPENSBI=y > BR2_TARGET_OPENSBI_CUSTOM_TARBALL=y > -# HEAD of the Fedora branch > -BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,opensbi,2524b0ecd8684b42bc7a4c69794f40f11cbbe2a5)/opensbi-2524b0ecd8684b42bc7a4c69794f40f11cbbe2a5.tar.gz" > -BR2_TARGET_OPENSBI_PLAT="starfive/vic7100" > +# upstream opensbi master branch > +BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION="$(call github,riscv,opensbi,79f9b4220ffa7f74356054be25d450d7958bf16c)/opensbi-79f9b4220ffa7f74356054be25d450d7958bf16c.tar.gz" > +BR2_TARGET_OPENSBI_PLAT="generic" > # BR2_TARGET_OPENSBI_INSTALL_DYNAMIC_IMG is not set > # BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set > BR2_TARGET_OPENSBI_UBOOT_PAYLOAD=y > +BR2_TARGET_OPENSBI_FW_FDT_PATH=y > BR2_TARGET_UBOOT=y > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y > BR2_TARGET_UBOOT_CUSTOM_TARBALL=y > # HEAD of the starfive-tech:Fedora_VIC_7100_2021.04 branch > BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,u-boot,64ead5b83959da8eb87b6963843addf5942e6ed4)/uboot-64ead5b83959da8eb87b6963843addf5942e6ed4.tar.gz" > BR2_TARGET_UBOOT_BOARD_DEFCONFIG="starfive_vic7100_beagle_v_smode" > +BR2_TARGET_UBOOT_FORMAT_DTB=y > BR2_PACKAGE_HOST_GENIMAGE=y > BR2_PACKAGE_HOST_JH71XX_TOOLS=y > -- > 2.27.0 > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot