[Patch 0/2] hw/arm/xlnx-versal: hw/arm/xlnx-zynqmp: Add unimplemented mmio

[Patch 0/2] hw/arm/xlnx-versal: hw/arm/xlnx-zynqmp: Add unimplemented mmio

[Tong Ho]

This series adds the APU mmio region as an unimplemented device
to each of two Xilinx SoC to support booting guests built with
the standalone bsp published at:
  https://github.com/Xilinx/embeddedsw/tree/master/lib/bsp/standalone/src/arm/ARMv8/64bit

Tong Ho (2):
  hw/arm/xlnx-versal: Add unimplemented APU mmio
  hw/arm/xlnx-zynqmp: Add unimplemented APU mmio

 hw/arm/xlnx-versal.c         |  2 ++
 hw/arm/xlnx-zynqmp.c         | 32 ++++++++++++++++++++++++++++++++
 include/hw/arm/xlnx-versal.h |  2 ++
 include/hw/arm/xlnx-zynqmp.h |  7 +++++++
 4 files changed, 43 insertions(+)

-- 
2.25.1

[Patch 1/2] hw/arm/xlnx-versal: Add unimplemented APU mmio

[Tong Ho]

Add unimplemented APU mmio region to xlnx-versal for booting
bare-metal guests built with standalone bsp published at:
  https://github.com/Xilinx/embeddedsw/tree/master/lib/bsp/standalone/src/arm/ARMv8/64bit

Signed-off-by: Tong Ho <tong.ho@xilinx.com>
---
 hw/arm/xlnx-versal.c         | 2 ++
 include/hw/arm/xlnx-versal.h | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
index fb776834f7..cb6ec0a4a0 100644
--- a/hw/arm/xlnx-versal.c
+++ b/hw/arm/xlnx-versal.c
@@ -376,6 +376,8 @@ static void versal_unimp(Versal *s)
                         MM_CRL, MM_CRL_SIZE);
     versal_unimp_area(s, "crf", &s->mr_ps,
                         MM_FPD_CRF, MM_FPD_CRF_SIZE);
+    versal_unimp_area(s, "apu", &s->mr_ps,
+                        MM_FPD_FPD_APU, MM_FPD_FPD_APU_SIZE);
     versal_unimp_area(s, "crp", &s->mr_ps,
                         MM_PMC_CRP, MM_PMC_CRP_SIZE);
     versal_unimp_area(s, "iou-scntr", &s->mr_ps,
diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
index 22a8fa5d11..9b79051747 100644
--- a/include/hw/arm/xlnx-versal.h
+++ b/include/hw/arm/xlnx-versal.h
@@ -167,6 +167,8 @@ struct Versal {
 #define MM_IOU_SCNTRS_SIZE          0x10000
 #define MM_FPD_CRF                  0xfd1a0000U
 #define MM_FPD_CRF_SIZE             0x140000
+#define MM_FPD_FPD_APU              0xfd5c0000
+#define MM_FPD_FPD_APU_SIZE         0x100
 
 #define MM_PMC_SD0                  0xf1040000U
 #define MM_PMC_SD0_SIZE             0x10000
-- 
2.25.1

[Patch 2/2] hw/arm/xlnx-zynqmp: Add unimplemented APU mmio

[Tong Ho]

Add unimplemented APU mmio region to xlnx-zynqmp for booting
bare-metal guests built with standalone bsp published at:
  https://github.com/Xilinx/embeddedsw/tree/master/lib/bsp/standalone/src/arm/ARMv8/64bit

Signed-off-by: Tong Ho <tong.ho@xilinx.com>
---
 hw/arm/xlnx-zynqmp.c         | 32 ++++++++++++++++++++++++++++++++
 include/hw/arm/xlnx-zynqmp.h |  7 +++++++
 2 files changed, 39 insertions(+)

diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 3597e8db4d..790df2b6f1 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -20,6 +20,7 @@
 #include "qemu/module.h"
 #include "hw/arm/xlnx-zynqmp.h"
 #include "hw/intc/arm_gic_common.h"
+#include "hw/misc/unimp.h"
 #include "hw/boards.h"
 #include "sysemu/kvm.h"
 #include "sysemu/sysemu.h"
@@ -56,6 +57,9 @@
 #define DPDMA_ADDR          0xfd4c0000
 #define DPDMA_IRQ           116
 
+#define APU_ADDR            0xfd5c0000
+#define APU_SIZE            0x100
+
 #define IPI_ADDR            0xFF300000
 #define IPI_IRQ             64
 
@@ -222,6 +226,32 @@ static void xlnx_zynqmp_create_rpu(MachineState *ms, XlnxZynqMPState *s,
     qdev_realize(DEVICE(&s->rpu_cluster), NULL, &error_fatal);
 }
 
+static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s)
+{
+    static const struct UnimpInfo {
+        const char *name;
+        hwaddr base;
+        hwaddr size;
+    } unimp_areas[ARRAY_SIZE(s->mr_unimp)] = {
+        { .name = "apu", APU_ADDR, APU_SIZE },
+    };
+
+    unsigned nr;
+
+    for (nr = 0; nr < ARRAY_SIZE(unimp_areas); nr++) {
+        const struct UnimpInfo *info = &unimp_areas[nr];
+        DeviceState *dev = qdev_new(TYPE_UNIMPLEMENTED_DEVICE);
+        SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+        qdev_prop_set_string(dev, "name", info->name);
+        qdev_prop_set_uint64(dev, "size", info->size);
+        object_property_add_child(OBJECT(s), info->name, OBJECT(dev));
+
+        sysbus_realize_and_unref(sbd, &error_fatal);
+        sysbus_mmio_map(sbd, 0, info->base);
+    }
+}
+
 static void xlnx_zynqmp_init(Object *obj)
 {
     MachineState *ms = MACHINE(qdev_get_machine());
@@ -616,6 +646,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]);
 
+    xlnx_zynqmp_create_unimp_mmio(s);
+
     for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) {
         if (!object_property_set_uint(OBJECT(&s->gdma[i]), "bus-width", 128,
                                       errp)) {
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index d3e2ef97f6..c84fe15996 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -79,6 +79,11 @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
 #define XLNX_ZYNQMP_MAX_RAM_SIZE (XLNX_ZYNQMP_MAX_LOW_RAM_SIZE + \
                                   XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE)
 
+/*
+ * Unimplemented mmio regions needed to boot some images.
+ */
+#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 1
+
 struct XlnxZynqMPState {
     /*< private >*/
     DeviceState parent_obj;
@@ -96,6 +101,8 @@ struct XlnxZynqMPState {
     MemoryRegion *ddr_ram;
     MemoryRegion ddr_ram_low, ddr_ram_high;
 
+    MemoryRegion mr_unimp[XLNX_ZYNQMP_NUM_UNIMP_AREAS];
+
     CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS];
     CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS];
     XlnxZynqMPCANState can[XLNX_ZYNQMP_NUM_CAN];
-- 
2.25.1

Re: [Patch 1/2] hw/arm/xlnx-versal: Add unimplemented APU mmio

[Alistair Francis]

On Thu, Aug 19, 2021 at 1:20 PM Tong Ho <tong.ho@xilinx.com> wrote:
>
> Add unimplemented APU mmio region to xlnx-versal for booting
> bare-metal guests built with standalone bsp published at:
>   https://github.com/Xilinx/embeddedsw/tree/master/lib/bsp/standalone/src/arm/ARMv8/64bit
>
> Signed-off-by: Tong Ho <tong.ho@xilinx.com>

Acked-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>  hw/arm/xlnx-versal.c         | 2 ++
>  include/hw/arm/xlnx-versal.h | 2 ++
>  2 files changed, 4 insertions(+)
>
> diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
> index fb776834f7..cb6ec0a4a0 100644
> --- a/hw/arm/xlnx-versal.c
> +++ b/hw/arm/xlnx-versal.c
> @@ -376,6 +376,8 @@ static void versal_unimp(Versal *s)
>                          MM_CRL, MM_CRL_SIZE);
>      versal_unimp_area(s, "crf", &s->mr_ps,
>                          MM_FPD_CRF, MM_FPD_CRF_SIZE);
> +    versal_unimp_area(s, "apu", &s->mr_ps,
> +                        MM_FPD_FPD_APU, MM_FPD_FPD_APU_SIZE);
>      versal_unimp_area(s, "crp", &s->mr_ps,
>                          MM_PMC_CRP, MM_PMC_CRP_SIZE);
>      versal_unimp_area(s, "iou-scntr", &s->mr_ps,
> diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
> index 22a8fa5d11..9b79051747 100644
> --- a/include/hw/arm/xlnx-versal.h
> +++ b/include/hw/arm/xlnx-versal.h
> @@ -167,6 +167,8 @@ struct Versal {
>  #define MM_IOU_SCNTRS_SIZE          0x10000
>  #define MM_FPD_CRF                  0xfd1a0000U
>  #define MM_FPD_CRF_SIZE             0x140000
> +#define MM_FPD_FPD_APU              0xfd5c0000
> +#define MM_FPD_FPD_APU_SIZE         0x100
>
>  #define MM_PMC_SD0                  0xf1040000U
>  #define MM_PMC_SD0_SIZE             0x10000
> --
> 2.25.1
>
>

Re: [Patch 2/2] hw/arm/xlnx-zynqmp: Add unimplemented APU mmio

[Alistair Francis]

On Thu, Aug 19, 2021 at 1:22 PM Tong Ho <tong.ho@xilinx.com> wrote:
>
> Add unimplemented APU mmio region to xlnx-zynqmp for booting
> bare-metal guests built with standalone bsp published at:
>   https://github.com/Xilinx/embeddedsw/tree/master/lib/bsp/standalone/src/arm/ARMv8/64bit
>
> Signed-off-by: Tong Ho <tong.ho@xilinx.com>

Acked-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>  hw/arm/xlnx-zynqmp.c         | 32 ++++++++++++++++++++++++++++++++
>  include/hw/arm/xlnx-zynqmp.h |  7 +++++++
>  2 files changed, 39 insertions(+)
>
> diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
> index 3597e8db4d..790df2b6f1 100644
> --- a/hw/arm/xlnx-zynqmp.c
> +++ b/hw/arm/xlnx-zynqmp.c
> @@ -20,6 +20,7 @@
>  #include "qemu/module.h"
>  #include "hw/arm/xlnx-zynqmp.h"
>  #include "hw/intc/arm_gic_common.h"
> +#include "hw/misc/unimp.h"
>  #include "hw/boards.h"
>  #include "sysemu/kvm.h"
>  #include "sysemu/sysemu.h"
> @@ -56,6 +57,9 @@
>  #define DPDMA_ADDR          0xfd4c0000
>  #define DPDMA_IRQ           116
>
> +#define APU_ADDR            0xfd5c0000
> +#define APU_SIZE            0x100
> +
>  #define IPI_ADDR            0xFF300000
>  #define IPI_IRQ             64
>
> @@ -222,6 +226,32 @@ static void xlnx_zynqmp_create_rpu(MachineState *ms, XlnxZynqMPState *s,
>      qdev_realize(DEVICE(&s->rpu_cluster), NULL, &error_fatal);
>  }
>
> +static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s)
> +{
> +    static const struct UnimpInfo {
> +        const char *name;
> +        hwaddr base;
> +        hwaddr size;
> +    } unimp_areas[ARRAY_SIZE(s->mr_unimp)] = {
> +        { .name = "apu", APU_ADDR, APU_SIZE },
> +    };
> +
> +    unsigned nr;
> +
> +    for (nr = 0; nr < ARRAY_SIZE(unimp_areas); nr++) {
> +        const struct UnimpInfo *info = &unimp_areas[nr];
> +        DeviceState *dev = qdev_new(TYPE_UNIMPLEMENTED_DEVICE);
> +        SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> +
> +        qdev_prop_set_string(dev, "name", info->name);
> +        qdev_prop_set_uint64(dev, "size", info->size);
> +        object_property_add_child(OBJECT(s), info->name, OBJECT(dev));
> +
> +        sysbus_realize_and_unref(sbd, &error_fatal);
> +        sysbus_mmio_map(sbd, 0, info->base);
> +    }
> +}
> +
>  static void xlnx_zynqmp_init(Object *obj)
>  {
>      MachineState *ms = MACHINE(qdev_get_machine());
> @@ -616,6 +646,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
>      sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR);
>      sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]);
>
> +    xlnx_zynqmp_create_unimp_mmio(s);
> +
>      for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) {
>          if (!object_property_set_uint(OBJECT(&s->gdma[i]), "bus-width", 128,
>                                        errp)) {
> diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
> index d3e2ef97f6..c84fe15996 100644
> --- a/include/hw/arm/xlnx-zynqmp.h
> +++ b/include/hw/arm/xlnx-zynqmp.h
> @@ -79,6 +79,11 @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
>  #define XLNX_ZYNQMP_MAX_RAM_SIZE (XLNX_ZYNQMP_MAX_LOW_RAM_SIZE + \
>                                    XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE)
>
> +/*
> + * Unimplemented mmio regions needed to boot some images.
> + */
> +#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 1
> +
>  struct XlnxZynqMPState {
>      /*< private >*/
>      DeviceState parent_obj;
> @@ -96,6 +101,8 @@ struct XlnxZynqMPState {
>      MemoryRegion *ddr_ram;
>      MemoryRegion ddr_ram_low, ddr_ram_high;
>
> +    MemoryRegion mr_unimp[XLNX_ZYNQMP_NUM_UNIMP_AREAS];
> +
>      CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS];
>      CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS];
>      XlnxZynqMPCANState can[XLNX_ZYNQMP_NUM_CAN];
> --
> 2.25.1
>
>

Re: [Patch 1/2] hw/arm/xlnx-versal: Add unimplemented APU mmio

[Edgar E. Iglesias]

On Wed, Aug 18, 2021 at 08:15:24PM -0700, Tong Ho wrote:
> Add unimplemented APU mmio region to xlnx-versal for booting
> bare-metal guests built with standalone bsp published at:
>   https://github.com/Xilinx/embeddedsw/tree/master/lib/bsp/standalone/src/arm/ARMv8/64bit


Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>



> 
> Signed-off-by: Tong Ho <tong.ho@xilinx.com>
> ---
>  hw/arm/xlnx-versal.c         | 2 ++
>  include/hw/arm/xlnx-versal.h | 2 ++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
> index fb776834f7..cb6ec0a4a0 100644
> --- a/hw/arm/xlnx-versal.c
> +++ b/hw/arm/xlnx-versal.c
> @@ -376,6 +376,8 @@ static void versal_unimp(Versal *s)
>                          MM_CRL, MM_CRL_SIZE);
>      versal_unimp_area(s, "crf", &s->mr_ps,
>                          MM_FPD_CRF, MM_FPD_CRF_SIZE);
> +    versal_unimp_area(s, "apu", &s->mr_ps,
> +                        MM_FPD_FPD_APU, MM_FPD_FPD_APU_SIZE);
>      versal_unimp_area(s, "crp", &s->mr_ps,
>                          MM_PMC_CRP, MM_PMC_CRP_SIZE);
>      versal_unimp_area(s, "iou-scntr", &s->mr_ps,
> diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
> index 22a8fa5d11..9b79051747 100644
> --- a/include/hw/arm/xlnx-versal.h
> +++ b/include/hw/arm/xlnx-versal.h
> @@ -167,6 +167,8 @@ struct Versal {
>  #define MM_IOU_SCNTRS_SIZE          0x10000
>  #define MM_FPD_CRF                  0xfd1a0000U
>  #define MM_FPD_CRF_SIZE             0x140000
> +#define MM_FPD_FPD_APU              0xfd5c0000
> +#define MM_FPD_FPD_APU_SIZE         0x100
>  
>  #define MM_PMC_SD0                  0xf1040000U
>  #define MM_PMC_SD0_SIZE             0x10000
> -- 
> 2.25.1
> 

Re: [Patch 2/2] hw/arm/xlnx-zynqmp: Add unimplemented APU mmio

[Edgar E. Iglesias]

On Wed, Aug 18, 2021 at 08:15:25PM -0700, Tong Ho wrote:
> Add unimplemented APU mmio region to xlnx-zynqmp for booting
> bare-metal guests built with standalone bsp published at:
>   https://github.com/Xilinx/embeddedsw/tree/master/lib/bsp/standalone/src/arm/ARMv8/64bit
> 
> Signed-off-by: Tong Ho <tong.ho@xilinx.com>
> ---
>  hw/arm/xlnx-zynqmp.c         | 32 ++++++++++++++++++++++++++++++++
>  include/hw/arm/xlnx-zynqmp.h |  7 +++++++
>  2 files changed, 39 insertions(+)
> 
> diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
> index 3597e8db4d..790df2b6f1 100644
> --- a/hw/arm/xlnx-zynqmp.c
> +++ b/hw/arm/xlnx-zynqmp.c
> @@ -20,6 +20,7 @@
>  #include "qemu/module.h"
>  #include "hw/arm/xlnx-zynqmp.h"
>  #include "hw/intc/arm_gic_common.h"
> +#include "hw/misc/unimp.h"
>  #include "hw/boards.h"
>  #include "sysemu/kvm.h"
>  #include "sysemu/sysemu.h"
> @@ -56,6 +57,9 @@
>  #define DPDMA_ADDR          0xfd4c0000
>  #define DPDMA_IRQ           116
>  
> +#define APU_ADDR            0xfd5c0000
> +#define APU_SIZE            0x100
> +
>  #define IPI_ADDR            0xFF300000
>  #define IPI_IRQ             64
>  
> @@ -222,6 +226,32 @@ static void xlnx_zynqmp_create_rpu(MachineState *ms, XlnxZynqMPState *s,
>      qdev_realize(DEVICE(&s->rpu_cluster), NULL, &error_fatal);
>  }
>  
> +static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s)
> +{
> +    static const struct UnimpInfo {
> +        const char *name;
> +        hwaddr base;
> +        hwaddr size;
> +    } unimp_areas[ARRAY_SIZE(s->mr_unimp)] = {
> +        { .name = "apu", APU_ADDR, APU_SIZE },
> +    };
> +

Nitpick, I'd probably drop this blank line and spell out the unsigned int below.

Also, we might want consider asserting that every array member has been
initialized. Eg assert(info->name) in the loop below. Unless perhaps something
already bails out in those cases (e.g sysbus_realize_and_unref()).

In either case:
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>


> +    unsigned nr;
> +
> +    for (nr = 0; nr < ARRAY_SIZE(unimp_areas); nr++) {
> +        const struct UnimpInfo *info = &unimp_areas[nr];
> +        DeviceState *dev = qdev_new(TYPE_UNIMPLEMENTED_DEVICE);
> +        SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> +
> +        qdev_prop_set_string(dev, "name", info->name);
> +        qdev_prop_set_uint64(dev, "size", info->size);
> +        object_property_add_child(OBJECT(s), info->name, OBJECT(dev));
> +
> +        sysbus_realize_and_unref(sbd, &error_fatal);
> +        sysbus_mmio_map(sbd, 0, info->base);
> +    }
> +}
> +
>  static void xlnx_zynqmp_init(Object *obj)
>  {
>      MachineState *ms = MACHINE(qdev_get_machine());
> @@ -616,6 +646,8 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
>      sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR);
>      sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]);
>  
> +    xlnx_zynqmp_create_unimp_mmio(s);
> +
>      for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) {
>          if (!object_property_set_uint(OBJECT(&s->gdma[i]), "bus-width", 128,
>                                        errp)) {
> diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
> index d3e2ef97f6..c84fe15996 100644
> --- a/include/hw/arm/xlnx-zynqmp.h
> +++ b/include/hw/arm/xlnx-zynqmp.h
> @@ -79,6 +79,11 @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP)
>  #define XLNX_ZYNQMP_MAX_RAM_SIZE (XLNX_ZYNQMP_MAX_LOW_RAM_SIZE + \
>                                    XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE)
>  
> +/*
> + * Unimplemented mmio regions needed to boot some images.
> + */
> +#define XLNX_ZYNQMP_NUM_UNIMP_AREAS 1
> +
>  struct XlnxZynqMPState {
>      /*< private >*/
>      DeviceState parent_obj;
> @@ -96,6 +101,8 @@ struct XlnxZynqMPState {
>      MemoryRegion *ddr_ram;
>      MemoryRegion ddr_ram_low, ddr_ram_high;
>  
> +    MemoryRegion mr_unimp[XLNX_ZYNQMP_NUM_UNIMP_AREAS];
> +
>      CadenceGEMState gem[XLNX_ZYNQMP_NUM_GEMS];
>      CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS];
>      XlnxZynqMPCANState can[XLNX_ZYNQMP_NUM_CAN];
> -- 
> 2.25.1
> 

Re: [Patch 1/2] hw/arm/xlnx-versal: Add unimplemented APU mmio

[Philippe Mathieu-Daudé]

On 8/19/21 5:15 AM, Tong Ho wrote:
> Add unimplemented APU mmio region to xlnx-versal for booting
> bare-metal guests built with standalone bsp published at:
>   https://github.com/Xilinx/embeddedsw/tree/master/lib/bsp/standalone/src/arm/ARMv8/64bit

This link is not very useful.

This one is:
https://github.com/Xilinx/embeddedsw/blob/master-rel-2020.2/lib/sw_apps/versal_psmfw/src/fpd_apu.h

> 
> Signed-off-by: Tong Ho <tong.ho@xilinx.com>
> ---
>  hw/arm/xlnx-versal.c         | 2 ++
>  include/hw/arm/xlnx-versal.h | 2 ++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
> index fb776834f7..cb6ec0a4a0 100644
> --- a/hw/arm/xlnx-versal.c
> +++ b/hw/arm/xlnx-versal.c
> @@ -376,6 +376,8 @@ static void versal_unimp(Versal *s)
>                          MM_CRL, MM_CRL_SIZE);
>      versal_unimp_area(s, "crf", &s->mr_ps,
>                          MM_FPD_CRF, MM_FPD_CRF_SIZE);
> +    versal_unimp_area(s, "apu", &s->mr_ps,
> +                        MM_FPD_FPD_APU, MM_FPD_FPD_APU_SIZE);
>      versal_unimp_area(s, "crp", &s->mr_ps,
>                          MM_PMC_CRP, MM_PMC_CRP_SIZE);
>      versal_unimp_area(s, "iou-scntr", &s->mr_ps,
> diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h
> index 22a8fa5d11..9b79051747 100644
> --- a/include/hw/arm/xlnx-versal.h
> +++ b/include/hw/arm/xlnx-versal.h
> @@ -167,6 +167,8 @@ struct Versal {
>  #define MM_IOU_SCNTRS_SIZE          0x10000
>  #define MM_FPD_CRF                  0xfd1a0000U
>  #define MM_FPD_CRF_SIZE             0x140000
> +#define MM_FPD_FPD_APU              0xfd5c0000
> +#define MM_FPD_FPD_APU_SIZE         0x100
>  
>  #define MM_PMC_SD0                  0xf1040000U
>  #define MM_PMC_SD0_SIZE             0x10000
> 

Re: [Patch 2/2] hw/arm/xlnx-zynqmp: Add unimplemented APU mmio

[Philippe Mathieu-Daudé]

On 8/19/21 5:15 AM, Tong Ho wrote:
> Add unimplemented APU mmio region to xlnx-zynqmp for booting
> bare-metal guests built with standalone bsp published at:
>   https://github.com/Xilinx/embeddedsw/tree/master/lib/bsp/standalone/src/arm/ARMv8/64bit

Again, please point to something more useful:

https://github.com/Xilinx/embeddedsw/blob/master-rel-2020.2/lib/sw_apps/zynqmp_fsbl/src/xfsbl_hw.h#L271

> Signed-off-by: Tong Ho <tong.ho@xilinx.com>
> ---
>  hw/arm/xlnx-zynqmp.c         | 32 ++++++++++++++++++++++++++++++++
>  include/hw/arm/xlnx-zynqmp.h |  7 +++++++
>  2 files changed, 39 insertions(+)