All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Aguirre, Sergio" <saaguirre@ti.com>
To: Rob Clark <rob.clark@linaro.org>
Cc: linux-omap@vger.kernel.org, patches@linaro.org,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Andy Gross <andy.gross@ti.com>, Rob Clark <rob@ti.com>
Subject: Re: [PATCH] omap2+: add drm device
Date: Fri, 13 Jan 2012 13:51:52 -0600	[thread overview]
Message-ID: <CAKnK67RcftwfUYRb+U6xqMPt9jXkHo_rdWjrpwUjUAqq7HpMnA@mail.gmail.com> (raw)
In-Reply-To: <1326483687-458-1-git-send-email-rob.clark@linaro.org>

Hi Rob,

Minor nitpicks.

On Fri, Jan 13, 2012 at 1:41 PM, Rob Clark <rob.clark@linaro.org> wrote:
> From: Rob Clark <rob@ti.com>
>
> Register OMAP DRM/KMS platform device, and reserve a CMA region for
> the device to use for buffer allocation.
>
> Signed-off-by: Rob Clark <rob@ti.com>
> ---
>  arch/arm/plat-omap/Makefile |    2 +-
>  arch/arm/plat-omap/common.c |    2 +
>  arch/arm/plat-omap/drm.c    |   88 +++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/plat-omap/drm.h    |   37 ++++++++++++++++++
>  4 files changed, 128 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/plat-omap/drm.c
>  create mode 100644 arch/arm/plat-omap/drm.h
>
> diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
> index 9a58461..b86e6cb 100644
> --- a/arch/arm/plat-omap/Makefile
> +++ b/arch/arm/plat-omap/Makefile
> @@ -4,7 +4,7 @@
>
>  # Common support
>  obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
> -        usb.o fb.o counter_32k.o
> +        usb.o fb.o counter_32k.o drm.o
>  obj-m :=
>  obj-n :=
>  obj-  :=
> diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
> index 06383b5..caf6082 100644
> --- a/arch/arm/plat-omap/common.c
> +++ b/arch/arm/plat-omap/common.c
> @@ -24,6 +24,7 @@
>
>  #include <plat/omap-secure.h>
>
> +#include "drm.h"
>
>  #define NO_LENGTH_CHECK 0xffffffff
>
> @@ -65,6 +66,7 @@ const void *__init omap_get_var_config(u16 tag, size_t *len)
>
>  void __init omap_reserve(void)
>  {
> +       omapdrm_reserve_vram();
>        omapfb_reserve_sdram_memblock();
>        omap_vram_reserve_sdram_memblock();
>        omap_dsp_reserve_sdram_memblock();
> diff --git a/arch/arm/plat-omap/drm.c b/arch/arm/plat-omap/drm.c
> new file mode 100644
> index 0000000..5d8588f
> --- /dev/null
> +++ b/arch/arm/plat-omap/drm.c
> @@ -0,0 +1,88 @@
> +/*
> + * File: arch/arm/plat-omap/drm.c

I believe keeping a file path is frowned upon.

> + *
> + * DRM/KMS device registration for TI OMAP platforms
> + *
> + * Copyright (C) 2011 Texas Instruments

Happy new year! (2012?) :)

> + * Author: Rob Clark <rob.clark@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/mm.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> +#ifdef CONFIG_CMA
> +#  include <linux/dma-contiguous.h>
> +#endif
> +
> +#include <plat/omap_device.h>
> +#include <plat/omap_hwmod.h>
> +
> +#include "drm.h"
> +
> +/* files from staging that contain platform data structure definitions */
> +#include "../../../drivers/staging/omapdrm/omap_priv.h"
> +#include "../../../drivers/staging/omapdrm/omap_dmm_tiler.h"
> +
> +#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
> +
> +static struct omap_drm_platform_data omapdrm_platdata;
> +static struct omap_dmm_platform_data dmm_platdata;
> +
> +static struct platform_device omap_drm_device = {
> +               .dev = {
> +                       .coherent_dma_mask = DMA_BIT_MASK(32),
> +                       .platform_data = &omapdrm_platdata,
> +               },
> +               .name = "omapdrm",
> +               .id = 0,
> +};
> +
> +static int __init omap_init_gpu(void)
> +{
> +       struct omap_hwmod *oh = NULL;
> +
> +       /* lookup and populate the DMM information, if present - OMAP4+ */
> +       oh = omap_hwmod_lookup("dmm");
> +
> +       if (oh) {
> +               dmm_platdata.base = omap_hwmod_get_mpu_rt_va(oh);
> +               dmm_platdata.irq = oh->mpu_irqs[0].irq;
> +
> +               if (dmm_platdata.base)
> +                       omapdrm_platdata.dmm_pdata = &dmm_platdata;
> +       }
> +
> +       return platform_device_register(&omap_drm_device);
> +}
> +
> +arch_initcall(omap_init_gpu);
> +
> +void omapdrm_reserve_vram(void)
> +{
> +#ifdef CONFIG_CMA
> +       /* Create private 32MiB contiguous memory area for omapdrm.0 device
> +        * TODO revisit size.. if uc/wc buffers are allocated from CMA pages
> +        * then the amount of memory we need goes up..
> +        */
> +       dma_declare_contiguous(&omap_drm_device.dev, 32*SZ_1M, 0, 0);
> +#else
> +#  warning "CMA is not enabled, there may be limitations about scanout buffer allocations on OMAP3 and earlier"
> +#endif
> +}
> +
> +#endif
> diff --git a/arch/arm/plat-omap/drm.h b/arch/arm/plat-omap/drm.h
> new file mode 100644
> index 0000000..56e0c0e
> --- /dev/null
> +++ b/arch/arm/plat-omap/drm.h
> @@ -0,0 +1,37 @@
> +/*
> + * File: arch/arm/plat-omap/drm.c

Again here. (The path is incorrect anyways)

> + *
> + * DRM/KMS device registration for TI OMAP platforms
> + *
> + * Copyright (C) 2011 Texas Instruments

2012 also here.

> + * Author: Rob Clark <rob.clark@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __PLAT_OMAP_DRM_H__
> +#define __PLAT_OMAP_DRM_H__
> +
> +#if defined(CONFIG_DRM_OMAP) || defined(CONFIG_DRM_OMAP_MODULE)
> +
> +void omapdrm_reserve_vram(void);
> +
> +#else
> +
> +static inline void omapdrm_reserve_vram(void)
> +{
> +}
> +
> +#endif
> +
> +#endif /* __PLAT_OMAP_DRM_H__ */
> --
> 1.7.5.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2012-01-13 19:52 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-13 19:41 [PATCH] omap2+: add drm device Rob Clark
2012-01-13 19:46 ` Rob Clark
2012-01-13 19:49   ` Felipe Contreras
2012-01-13 19:53     ` Rob Clark
2012-01-13 20:23       ` Felipe Contreras
2012-01-13 20:25         ` Rob Clark
2012-01-13 19:51 ` Aguirre, Sergio [this message]
2012-01-13 19:54   ` Rob Clark
2012-01-13 20:29 ` Felipe Contreras
2012-03-05 16:54 Rob Clark
2012-03-06  0:10 ` Tony Lindgren
2012-03-06  1:42   ` Rob Clark
2012-03-06 13:26 ` Tomi Valkeinen
2012-03-06 14:01   ` Rob Clark
2012-03-06 14:35     ` Tomi Valkeinen
2012-03-06 15:29       ` Rob Clark
2012-03-07 11:59         ` Tomi Valkeinen
2012-03-07 13:06           ` Rob Clark
2012-03-07 13:11             ` Tomi Valkeinen
2012-03-06 15:50       ` Gross, Andy
2012-03-07 12:05         ` Tomi Valkeinen
2012-03-07 13:27           ` Rob Clark
2012-03-07 15:59           ` Gross, Andy
2012-03-08  7:47             ` Tomi Valkeinen
2012-03-13 20:34 Rob Clark
2012-03-14 12:38 ` Tomi Valkeinen
2012-03-14 12:55   ` Rob Clark
2012-03-14 13:07     ` Tomi Valkeinen
2012-03-14 13:16       ` Rob Clark
2012-03-14 13:43         ` Tomi Valkeinen
2012-03-14 15:06           ` Rob Clark
2012-03-15  8:46             ` Tomi Valkeinen
2012-03-15 12:32               ` Rob Clark
2012-03-16 11:03                 ` Tomi Valkeinen
2012-05-23 20:08 Andy Gross
2012-05-24  6:01 ` Tomi Valkeinen
2012-05-24  6:27   ` Clark, Rob
2012-05-24  7:05     ` Tomi Valkeinen
2012-05-24  7:21       ` Tomi Valkeinen
2012-05-24  8:44         ` Rob Clark
2012-05-24 12:13           ` Tomi Valkeinen
2012-05-24 15:09             ` Gross, Andy
2012-05-24 15:26               ` Tomi Valkeinen
2012-06-11 14:51                 ` Gross, Andy
2012-06-11 14:54                   ` Gross, Andy
2012-06-11 15:05                   ` Tomi Valkeinen
2012-05-24  8:35       ` Rob Clark
2012-05-24 12:10         ` Tomi Valkeinen
2012-05-24 14:22   ` Gross, Andy
2012-06-11 15:51 ` Rob Clark
2012-06-19 21:12   ` Gross, Andy
2012-07-03  7:09     ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAKnK67RcftwfUYRb+U6xqMPt9jXkHo_rdWjrpwUjUAqq7HpMnA@mail.gmail.com \
    --to=saaguirre@ti.com \
    --cc=andy.gross@ti.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=patches@linaro.org \
    --cc=rob.clark@linaro.org \
    --cc=rob@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.