All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3] cpufreq: powernv: Report cpu frequency throttling
@ 2015-03-27  7:32 Shilpasri G Bhat
  2015-03-27  7:40 ` Viresh Kumar
  0 siblings, 1 reply; 4+ messages in thread
From: Shilpasri G Bhat @ 2015-03-27  7:32 UTC (permalink / raw)
  To: Rafael J. Wysocki, Viresh Kumar, linux-pm, linux-kernel; +Cc: Shilpasri G Bhat

The power and thermal safety of the system is taken care by an
On-Chip-Controller (OCC) which is real-time subsystem embedded within
the POWER8 processor. OCC continuously monitors the memory and core
temperature, the total system power, state of power supply and fan.

The cpu frequency can be throttled by OCC for the following reasons:
1)If a processor crosses its power and temperature limit then OCC will
  lower its Pmax to reduce the frequency and voltage.
2)If OCC crashes then the system is forced to Psafe frequency.
3)If OCC fails to recover then the kernel is not allowed to do any
  further frequency changes and the chip will remain in Psafe.

The user can see a drop in performance when frequency is throttled and
is unaware of throttling. So detect and report such a condition so
that user can check the OCC status to reboot the system or check for
power supply or fan failures.

The current status of the core is read from Power Management Status
Register(PMSR) to check if any of the throttling condition is occurred
and the appropriate throttling message is reported.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
---
Changes from V2:
-Changed commit log to add more details.
-Fixed multi-line comment to proper format

Changes from V1: Removed unused value of PMCR register

 drivers/cpufreq/powernv-cpufreq.c | 40 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
index 2dfd4fd..0eb89a9 100644
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -36,7 +36,7 @@
 #define POWERNV_MAX_PSTATES	256
 
 static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
-static bool rebooting;
+static bool rebooting, throttled;
 
 /*
  * Note: The set of pstates consists of contiguous integers, the
@@ -294,6 +294,41 @@ static inline unsigned int get_nominal_index(void)
 	return powernv_pstate_info.max - powernv_pstate_info.nominal;
 }
 
+static void powernv_cpufreq_throttle_check(unsigned int cpu)
+{
+	unsigned long pmsr;
+	int pmsr_pmax, pmsr_lp;
+
+	pmsr = get_pmspr(SPRN_PMSR);
+
+	/* Check for Pmax Capping */
+	pmsr_pmax = (s8)((pmsr >> 32) & 0xFF);
+	if (pmsr_pmax != powernv_pstate_info.max) {
+		throttled = true;
+		pr_warn("Cpu %d Pmax is reduced to %d\n", cpu, pmsr_pmax);
+	}
+
+	/*
+	 * Check for Psafe by reading LocalPstate
+	 * or check if Psafe_mode_active- 34th bit is set in PMSR.
+	 */
+	pmsr_lp = (s8)((pmsr >> 48) & 0xFF);
+	if ((pmsr_lp < powernv_pstate_info.min) || ((pmsr >> 30) & 1)) {
+		throttled = true;
+		pr_warn("Cpu %d in Psafe %d PMSR[34]=%lx\n", cpu,
+				pmsr_lp, ((pmsr >> 30) & 1));
+	}
+
+	/* Check if SPR_EM_DISABLED- 33rd bit is set in PMSR */
+	if ((pmsr >> 31) & 1) {
+		throttled = true;
+		pr_warn("Frequency management disabled cpu %d PMSR[33]=%lx\n",
+				cpu, ((pmsr >> 31) & 1));
+	}
+	if (throttled)
+		pr_warn("Cpu Frequency is throttled\n");
+}
+
 /*
  * powernv_cpufreq_target_index: Sets the frequency corresponding to
  * the cpufreq table entry indexed by new_index on the cpus in the
@@ -307,6 +342,9 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
 	if (unlikely(rebooting) && new_index != get_nominal_index())
 		return 0;
 
+	if (!throttled)
+		powernv_cpufreq_throttle_check(smp_processor_id());
+
 	freq_data.pstate_id = powernv_freqs[new_index].driver_data;
 
 	/*
-- 
1.9.3


^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH v3] cpufreq: powernv: Report cpu frequency throttling
  2015-03-27  7:32 [PATCH v3] cpufreq: powernv: Report cpu frequency throttling Shilpasri G Bhat
@ 2015-03-27  7:40 ` Viresh Kumar
  2015-03-30 19:15   ` Rafael J. Wysocki
  0 siblings, 1 reply; 4+ messages in thread
From: Viresh Kumar @ 2015-03-27  7:40 UTC (permalink / raw)
  To: Shilpasri G Bhat; +Cc: Rafael J. Wysocki, linux-pm, Linux Kernel Mailing List

On 27 March 2015 at 13:02, Shilpasri G Bhat
<shilpa.bhat@linux.vnet.ibm.com> wrote:
> The power and thermal safety of the system is taken care by an
> On-Chip-Controller (OCC) which is real-time subsystem embedded within
> the POWER8 processor. OCC continuously monitors the memory and core
> temperature, the total system power, state of power supply and fan.
>
> The cpu frequency can be throttled by OCC for the following reasons:
> 1)If a processor crosses its power and temperature limit then OCC will
>   lower its Pmax to reduce the frequency and voltage.
> 2)If OCC crashes then the system is forced to Psafe frequency.
> 3)If OCC fails to recover then the kernel is not allowed to do any
>   further frequency changes and the chip will remain in Psafe.
>
> The user can see a drop in performance when frequency is throttled and
> is unaware of throttling. So detect and report such a condition so
> that user can check the OCC status to reboot the system or check for
> power supply or fan failures.
>
> The current status of the core is read from Power Management Status
> Register(PMSR) to check if any of the throttling condition is occurred
> and the appropriate throttling message is reported.
>
> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
> ---
> Changes from V2:
> -Changed commit log to add more details.
> -Fixed multi-line comment to proper format
>
> Changes from V1: Removed unused value of PMCR register
>
>  drivers/cpufreq/powernv-cpufreq.c | 40 ++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 39 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
> index 2dfd4fd..0eb89a9 100644
> --- a/drivers/cpufreq/powernv-cpufreq.c
> +++ b/drivers/cpufreq/powernv-cpufreq.c
> @@ -36,7 +36,7 @@
>  #define POWERNV_MAX_PSTATES    256
>
>  static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
> -static bool rebooting;
> +static bool rebooting, throttled;
>
>  /*
>   * Note: The set of pstates consists of contiguous integers, the
> @@ -294,6 +294,41 @@ static inline unsigned int get_nominal_index(void)
>         return powernv_pstate_info.max - powernv_pstate_info.nominal;
>  }
>
> +static void powernv_cpufreq_throttle_check(unsigned int cpu)
> +{
> +       unsigned long pmsr;
> +       int pmsr_pmax, pmsr_lp;
> +
> +       pmsr = get_pmspr(SPRN_PMSR);
> +
> +       /* Check for Pmax Capping */
> +       pmsr_pmax = (s8)((pmsr >> 32) & 0xFF);
> +       if (pmsr_pmax != powernv_pstate_info.max) {
> +               throttled = true;
> +               pr_warn("Cpu %d Pmax is reduced to %d\n", cpu, pmsr_pmax);
> +       }
> +
> +       /*
> +        * Check for Psafe by reading LocalPstate
> +        * or check if Psafe_mode_active- 34th bit is set in PMSR.
> +        */
> +       pmsr_lp = (s8)((pmsr >> 48) & 0xFF);
> +       if ((pmsr_lp < powernv_pstate_info.min) || ((pmsr >> 30) & 1)) {
> +               throttled = true;
> +               pr_warn("Cpu %d in Psafe %d PMSR[34]=%lx\n", cpu,
> +                               pmsr_lp, ((pmsr >> 30) & 1));
> +       }
> +
> +       /* Check if SPR_EM_DISABLED- 33rd bit is set in PMSR */
> +       if ((pmsr >> 31) & 1) {
> +               throttled = true;
> +               pr_warn("Frequency management disabled cpu %d PMSR[33]=%lx\n",
> +                               cpu, ((pmsr >> 31) & 1));
> +       }
> +       if (throttled)
> +               pr_warn("Cpu Frequency is throttled\n");
> +}
> +
>  /*
>   * powernv_cpufreq_target_index: Sets the frequency corresponding to
>   * the cpufreq table entry indexed by new_index on the cpus in the
> @@ -307,6 +342,9 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
>         if (unlikely(rebooting) && new_index != get_nominal_index())
>                 return 0;
>
> +       if (!throttled)
> +               powernv_cpufreq_throttle_check(smp_processor_id());
> +
>         freq_data.pstate_id = powernv_freqs[new_index].driver_data;

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v3] cpufreq: powernv: Report cpu frequency throttling
  2015-03-27  7:40 ` Viresh Kumar
@ 2015-03-30 19:15   ` Rafael J. Wysocki
  2015-04-01  9:44     ` Shilpasri G Bhat
  0 siblings, 1 reply; 4+ messages in thread
From: Rafael J. Wysocki @ 2015-03-30 19:15 UTC (permalink / raw)
  To: Viresh Kumar; +Cc: Shilpasri G Bhat, linux-pm, Linux Kernel Mailing List

On Friday, March 27, 2015 01:10:46 PM Viresh Kumar wrote:
> On 27 March 2015 at 13:02, Shilpasri G Bhat
> <shilpa.bhat@linux.vnet.ibm.com> wrote:
> > The power and thermal safety of the system is taken care by an
> > On-Chip-Controller (OCC) which is real-time subsystem embedded within
> > the POWER8 processor. OCC continuously monitors the memory and core
> > temperature, the total system power, state of power supply and fan.
> >
> > The cpu frequency can be throttled by OCC for the following reasons:
> > 1)If a processor crosses its power and temperature limit then OCC will
> >   lower its Pmax to reduce the frequency and voltage.
> > 2)If OCC crashes then the system is forced to Psafe frequency.
> > 3)If OCC fails to recover then the kernel is not allowed to do any
> >   further frequency changes and the chip will remain in Psafe.
> >
> > The user can see a drop in performance when frequency is throttled and
> > is unaware of throttling. So detect and report such a condition so
> > that user can check the OCC status to reboot the system or check for
> > power supply or fan failures.
> >
> > The current status of the core is read from Power Management Status
> > Register(PMSR) to check if any of the throttling condition is occurred
> > and the appropriate throttling message is reported.
> >
> > Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
> > ---
> > Changes from V2:
> > -Changed commit log to add more details.
> > -Fixed multi-line comment to proper format
> >
> > Changes from V1: Removed unused value of PMCR register
> >
> >  drivers/cpufreq/powernv-cpufreq.c | 40 ++++++++++++++++++++++++++++++++++++++-
> >  1 file changed, 39 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
> > index 2dfd4fd..0eb89a9 100644
> > --- a/drivers/cpufreq/powernv-cpufreq.c
> > +++ b/drivers/cpufreq/powernv-cpufreq.c
> > @@ -36,7 +36,7 @@
> >  #define POWERNV_MAX_PSTATES    256
> >
> >  static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
> > -static bool rebooting;
> > +static bool rebooting, throttled;
> >
> >  /*
> >   * Note: The set of pstates consists of contiguous integers, the
> > @@ -294,6 +294,41 @@ static inline unsigned int get_nominal_index(void)
> >         return powernv_pstate_info.max - powernv_pstate_info.nominal;
> >  }
> >
> > +static void powernv_cpufreq_throttle_check(unsigned int cpu)
> > +{
> > +       unsigned long pmsr;
> > +       int pmsr_pmax, pmsr_lp;
> > +
> > +       pmsr = get_pmspr(SPRN_PMSR);
> > +
> > +       /* Check for Pmax Capping */
> > +       pmsr_pmax = (s8)((pmsr >> 32) & 0xFF);
> > +       if (pmsr_pmax != powernv_pstate_info.max) {
> > +               throttled = true;
> > +               pr_warn("Cpu %d Pmax is reduced to %d\n", cpu, pmsr_pmax);
> > +       }
> > +
> > +       /*
> > +        * Check for Psafe by reading LocalPstate
> > +        * or check if Psafe_mode_active- 34th bit is set in PMSR.
> > +        */
> > +       pmsr_lp = (s8)((pmsr >> 48) & 0xFF);
> > +       if ((pmsr_lp < powernv_pstate_info.min) || ((pmsr >> 30) & 1)) {
> > +               throttled = true;
> > +               pr_warn("Cpu %d in Psafe %d PMSR[34]=%lx\n", cpu,
> > +                               pmsr_lp, ((pmsr >> 30) & 1));
> > +       }
> > +
> > +       /* Check if SPR_EM_DISABLED- 33rd bit is set in PMSR */
> > +       if ((pmsr >> 31) & 1) {
> > +               throttled = true;
> > +               pr_warn("Frequency management disabled cpu %d PMSR[33]=%lx\n",
> > +                               cpu, ((pmsr >> 31) & 1));
> > +       }
> > +       if (throttled)
> > +               pr_warn("Cpu Frequency is throttled\n");
> > +}
> > +
> >  /*
> >   * powernv_cpufreq_target_index: Sets the frequency corresponding to
> >   * the cpufreq table entry indexed by new_index on the cpus in the
> > @@ -307,6 +342,9 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
> >         if (unlikely(rebooting) && new_index != get_nominal_index())
> >                 return 0;
> >
> > +       if (!throttled)
> > +               powernv_cpufreq_throttle_check(smp_processor_id());
> > +
> >         freq_data.pstate_id = powernv_freqs[new_index].driver_data;
> 
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Queued up for 4.1, thanks!


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v3] cpufreq: powernv: Report cpu frequency throttling
  2015-03-30 19:15   ` Rafael J. Wysocki
@ 2015-04-01  9:44     ` Shilpasri G Bhat
  0 siblings, 0 replies; 4+ messages in thread
From: Shilpasri G Bhat @ 2015-04-01  9:44 UTC (permalink / raw)
  To: Rafael J. Wysocki, Viresh Kumar; +Cc: linux-pm, Linux Kernel Mailing List

Hi Rafael,

On 03/31/2015 12:45 AM, Rafael J. Wysocki wrote:
> On Friday, March 27, 2015 01:10:46 PM Viresh Kumar wrote:
>> On 27 March 2015 at 13:02, Shilpasri G Bhat
>> <shilpa.bhat@linux.vnet.ibm.com> wrote:
>>> The power and thermal safety of the system is taken care by an
>>> On-Chip-Controller (OCC) which is real-time subsystem embedded within
>>> the POWER8 processor. OCC continuously monitors the memory and core
>>> temperature, the total system power, state of power supply and fan.
>>>
>>> The cpu frequency can be throttled by OCC for the following reasons:
>>> 1)If a processor crosses its power and temperature limit then OCC will
>>>   lower its Pmax to reduce the frequency and voltage.
>>> 2)If OCC crashes then the system is forced to Psafe frequency.
>>> 3)If OCC fails to recover then the kernel is not allowed to do any
>>>   further frequency changes and the chip will remain in Psafe.
>>>
>>> The user can see a drop in performance when frequency is throttled and
>>> is unaware of throttling. So detect and report such a condition so
>>> that user can check the OCC status to reboot the system or check for
>>> power supply or fan failures.
>>>
>>> The current status of the core is read from Power Management Status
>>> Register(PMSR) to check if any of the throttling condition is occurred
>>> and the appropriate throttling message is reported.
>>>
>>> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
>>> ---
>>> Changes from V2:
>>> -Changed commit log to add more details.
>>> -Fixed multi-line comment to proper format
>>>
>>> Changes from V1: Removed unused value of PMCR register
>>>
>>>  drivers/cpufreq/powernv-cpufreq.c | 40 ++++++++++++++++++++++++++++++++++++++-
>>>  1 file changed, 39 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
>>> index 2dfd4fd..0eb89a9 100644
>>> --- a/drivers/cpufreq/powernv-cpufreq.c
>>> +++ b/drivers/cpufreq/powernv-cpufreq.c
>>> @@ -36,7 +36,7 @@
>>>  #define POWERNV_MAX_PSTATES    256
>>>
>>>  static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
>>> -static bool rebooting;
>>> +static bool rebooting, throttled;
>>>
>>>  /*
>>>   * Note: The set of pstates consists of contiguous integers, the
>>> @@ -294,6 +294,41 @@ static inline unsigned int get_nominal_index(void)
>>>         return powernv_pstate_info.max - powernv_pstate_info.nominal;
>>>  }
>>>
>>> +static void powernv_cpufreq_throttle_check(unsigned int cpu)
>>> +{
>>> +       unsigned long pmsr;
>>> +       int pmsr_pmax, pmsr_lp;
>>> +
>>> +       pmsr = get_pmspr(SPRN_PMSR);
>>> +
>>> +       /* Check for Pmax Capping */
>>> +       pmsr_pmax = (s8)((pmsr >> 32) & 0xFF);
>>> +       if (pmsr_pmax != powernv_pstate_info.max) {
>>> +               throttled = true;
>>> +               pr_warn("Cpu %d Pmax is reduced to %d\n", cpu, pmsr_pmax);
>>> +       }
>>> +
>>> +       /*
>>> +        * Check for Psafe by reading LocalPstate
>>> +        * or check if Psafe_mode_active- 34th bit is set in PMSR.
>>> +        */
>>> +       pmsr_lp = (s8)((pmsr >> 48) & 0xFF);
>>> +       if ((pmsr_lp < powernv_pstate_info.min) || ((pmsr >> 30) & 1)) {
>>> +               throttled = true;
>>> +               pr_warn("Cpu %d in Psafe %d PMSR[34]=%lx\n", cpu,
>>> +                               pmsr_lp, ((pmsr >> 30) & 1));
>>> +       }
>>> +
>>> +       /* Check if SPR_EM_DISABLED- 33rd bit is set in PMSR */
>>> +       if ((pmsr >> 31) & 1) {
>>> +               throttled = true;
>>> +               pr_warn("Frequency management disabled cpu %d PMSR[33]=%lx\n",
>>> +                               cpu, ((pmsr >> 31) & 1));
>>> +       }
>>> +       if (throttled)
>>> +               pr_warn("Cpu Frequency is throttled\n");
>>> +}
>>> +
>>>  /*
>>>   * powernv_cpufreq_target_index: Sets the frequency corresponding to
>>>   * the cpufreq table entry indexed by new_index on the cpus in the
>>> @@ -307,6 +342,9 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
>>>         if (unlikely(rebooting) && new_index != get_nominal_index())
>>>                 return 0;
>>>
>>> +       if (!throttled)
>>> +               powernv_cpufreq_throttle_check(smp_processor_id());
>>> +
>>>         freq_data.pstate_id = powernv_freqs[new_index].driver_data;
>>
>> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> 
> Queued up for 4.1, thanks!
> 
> 

Kindly revert this patch. This patch requires additional cosmetic
changes for better readability and maintenance, without any change in
functionality. I would have wanted to post the diff with the additional
changes in this patch but it touches almost the whole thing, so I will
post out v4 version of this patch with all the changes. Apologies for the
inconvenience.

Thanks and Regards,
Shilpa


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2015-04-01  9:45 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-03-27  7:32 [PATCH v3] cpufreq: powernv: Report cpu frequency throttling Shilpasri G Bhat
2015-03-27  7:40 ` Viresh Kumar
2015-03-30 19:15   ` Rafael J. Wysocki
2015-04-01  9:44     ` Shilpasri G Bhat

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.