From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-pl1-x644.google.com ([2607:f8b0:4864:20::644]) by casper.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kaQhD-0003xD-OJ for ath11k@lists.infradead.org; Wed, 04 Nov 2020 21:52:02 +0000 Received: by mail-pl1-x644.google.com with SMTP id b19so10941668pld.0 for ; Wed, 04 Nov 2020 13:51:58 -0800 (PST) MIME-Version: 1.0 References: <87r1r4nukq.fsf@codeaurora.org> <87mtzxqdyf.fsf@codeaurora.org> In-Reply-To: <87mtzxqdyf.fsf@codeaurora.org> From: Kenny Johansson Date: Wed, 4 Nov 2020 22:50:41 +0100 Message-ID: Subject: Re: ath11k: QCA6390 support on Linux List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath11k" Errors-To: ath11k-bounces+kvalo=adurom.com@lists.infradead.org To: Kalle Valo Cc: ath11k@lists.infradead.org Hi I've tried it out and this time it did not work for me. (Previous instructions with ath11k-qca6390-bringup-202008181507 did bring it up.) My laptop is a Dell XPS 15" with Killer Wi-fi 6 AX500-DBS (2x2) (QCA6390) Output from dmesg: sudo dmesg | grep ath11k [ 7.450993] ath11k_pci 0000:6c:00.0: WARNING: ath11k PCI support is experimental! [ 7.451067] ath11k_pci 0000:6c:00.0: BAR 0: assigned [mem 0xb4200000-0xb42fffff 64bit] [ 7.451082] ath11k_pci 0000:6c:00.0: enabling device (0000 -> 0002) [ 7.955819] ath11k_pci 0000:6c:00.0: Respond mem req failed, result: 1, err: 0 [ 7.955821] ath11k_pci 0000:6c:00.0: qmi failed to respond fw mem req:-22 [ 8.004127] ath11k_pci 0000:6c:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff [ 8.004128] ath11k_pci 0000:6c:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id [ 10.081910] ath11k_pci 0000:6c:00.0 wlp108s0: renamed from wlan0 [ 13.346532] ath11k_pci 0000:6c:00.0: wmi command 20488 timeout [ 13.346533] ath11k_pci 0000:6c:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID [ 13.346534] ath11k_pci 0000:6c:00.0: failed to set vdev 0 tx encap mode: -11 [ 16.418519] ath11k_pci 0000:6c:00.0: wmi command 20488 timeout [ 16.418520] ath11k_pci 0000:6c:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID [ 16.418521] ath11k_pci 0000:6c:00.0: failed to set vdev 0 chainmask 0x3, nss 2 :-11 [ 19.490526] ath11k_pci 0000:6c:00.0: wmi command 20482 timeout [ 19.490527] ath11k_pci 0000:6c:00.0: failed to submit WMI_VDEV_DELETE_CMDID [ 22.818765] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout [ 22.818767] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ 22.818769] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 [ 25.890491] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout [ 25.890493] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ 25.890494] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 [ 38.178527] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout [ 38.178529] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ 38.178531] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 [ 41.250526] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout Please let me know if I can provide anything more. On Wed, Nov 4, 2020 at 5:33 PM Kalle Valo wrote: > > Kalle Valo writes: > > > some of the Dell XPS 15 9500 models have QCA6390 Wi-Fi 6 device. ath11k > > will be the driver to support QCA6390 and the plan is that Linux v5.10 > > (most likely released end of December) will be the first release to > > support it. > > > > But as everything is not ready yet I recommend people to test > > ath11k-qca6390-bringup branch, and specifically tag > > ath11k-qca6390-bringup-202008181507. Below are instructions how to > > install kernel and firmware. > > > > Do note that this is still experimental, there will be bugs but at least > > it should be possible to connect to an AP and have connectivity. > > > > Please send all questions, comments and bug reports to > > ath11k@lists.infradead.org list. I do not have time to reply to private > > email. I have Bcced people who have contacted me privately. > > Some updates: > > * QCA6390 support is now in v5.10-rc2 > > * pull request to linux-firmware sent, not yet pulled > > * board-2.bin should be now used instead of board.bin > > * there was some reorganisation in ath11k-firmware > > Here are updated instructions on how to test ath11k: > > # clone kernel > git clone -b v5.10-rc2 git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > > # clone firmware > git clone https://github.com/kvalo/ath11k-firmware.git > > # Ensure below options are selected in the kernel > cd linux > make menuconfig > --> Select Device drivers > --> Network device support > --> Wireless LAN > --> Enable as below > Qualcomm Technologies 11ax chipset support > Atheros ath11k PCI support > [*] QCA ath11k debugging > [*] QCA ath11k debugfs support > [*] ath11k tracing support > [*] QCA ath11k spectral scan support > > # Build and install the kernel and kernel modules > > # Install firmware > cd ../ath11k-firmware > sudo mkdir -p /lib/firmware/ath11k/QCA6390/hw2.0/ > sudo cp QCA6390/hw2.0/1.0.1/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/*.bin /lib/firmware/ath11k/QCA6390/hw2.0/ > sudo cp QCA6390/hw2.0/board-2.bin /lib/firmware/ath11k/QCA6390/hw2.0/ > > -- > https://patchwork.kernel.org/project/linux-wireless/list/ > > https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches > > -- > ath11k mailing list > ath11k@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/ath11k -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k