All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nick Desaulniers <ndesaulniers@google.com>
To: Adrian Ratiu <adrian.ratiu@collabora.com>
Cc: Linux ARM <linux-arm-kernel@lists.infradead.org>,
	Nathan Chancellor <natechancellor@gmail.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Russell King <linux@armlinux.org.uk>,
	Ard Biesheuvel <ardb@kernel.org>,
	Arvind Sankar <nivedita@alum.mit.edu>,
	Collabora Kernel ML <kernel@collabora.com>,
	clang-built-linux <clang-built-linux@googlegroups.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 2/2] arm: lib: xor-neon: move pragma options to makefile
Date: Thu, 12 Nov 2020 13:40:08 -0800	[thread overview]
Message-ID: <CAKwvOdkM7q2muArRQxgZ3SdCHYTUja-KtkCveo8bq3RV8GWfKw@mail.gmail.com> (raw)
In-Reply-To: <20201112212457.2042105-3-adrian.ratiu@collabora.com>

On Thu, Nov 12, 2020 at 1:23 PM Adrian Ratiu <adrian.ratiu@collabora.com> wrote:
>
> Using a pragma like GCC optimize is a bad idea because it tags
> all functions with an __attribute__((optimize)) which replaces
> optimization options rather than appending so could result in
> dropping important flags. Not recommended for production use.
>
> Because these options should always be enabled for this file,
> it's better to set them via command line. tree-vectorize is on
> by default in Clang, but it doesn't hurt to make it explicit.
>
> Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
> Suggested-by: Ard Biesheuvel <ardb@kernel.org>
> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

> ---
>  arch/arm/lib/Makefile   |  2 +-
>  arch/arm/lib/xor-neon.c | 10 ----------
>  2 files changed, 1 insertion(+), 11 deletions(-)
>
> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
> index 6d2ba454f25b..12d31d1a7630 100644
> --- a/arch/arm/lib/Makefile
> +++ b/arch/arm/lib/Makefile
> @@ -45,6 +45,6 @@ $(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
>
>  ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
>    NEON_FLAGS                   := -march=armv7-a -mfloat-abi=softfp -mfpu=neon
> -  CFLAGS_xor-neon.o            += $(NEON_FLAGS)
> +  CFLAGS_xor-neon.o            += $(NEON_FLAGS) -ftree-vectorize -Wno-unused-variable
>    obj-$(CONFIG_XOR_BLOCKS)     += xor-neon.o
>  endif
> diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
> index e1e76186ec23..62b493e386c4 100644
> --- a/arch/arm/lib/xor-neon.c
> +++ b/arch/arm/lib/xor-neon.c
> @@ -14,16 +14,6 @@ MODULE_LICENSE("GPL");
>  #error You should compile this file with '-march=armv7-a -mfloat-abi=softfp -mfpu=neon'
>  #endif
>
> -/*
> - * Pull in the reference implementations while instructing GCC (through
> - * -ftree-vectorize) to attempt to exploit implicit parallelism and emit
> - * NEON instructions.
> - */
> -#ifdef CONFIG_CC_IS_GCC
> -#pragma GCC optimize "tree-vectorize"
> -#endif
> -
> -#pragma GCC diagnostic ignored "-Wunused-variable"
>  #include <asm-generic/xor.h>
>
>  struct xor_block_template const xor_block_neon_inner = {
> --
> 2.29.2
>


-- 
Thanks,
~Nick Desaulniers

WARNING: multiple messages have this Message-ID (diff)
From: Nick Desaulniers <ndesaulniers@google.com>
To: Adrian Ratiu <adrian.ratiu@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Russell King <linux@armlinux.org.uk>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	clang-built-linux <clang-built-linux@googlegroups.com>,
	Arvind Sankar <nivedita@alum.mit.edu>,
	Nathan Chancellor <natechancellor@gmail.com>,
	Collabora Kernel ML <kernel@collabora.com>,
	Ard Biesheuvel <ardb@kernel.org>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 2/2] arm: lib: xor-neon: move pragma options to makefile
Date: Thu, 12 Nov 2020 13:40:08 -0800	[thread overview]
Message-ID: <CAKwvOdkM7q2muArRQxgZ3SdCHYTUja-KtkCveo8bq3RV8GWfKw@mail.gmail.com> (raw)
In-Reply-To: <20201112212457.2042105-3-adrian.ratiu@collabora.com>

On Thu, Nov 12, 2020 at 1:23 PM Adrian Ratiu <adrian.ratiu@collabora.com> wrote:
>
> Using a pragma like GCC optimize is a bad idea because it tags
> all functions with an __attribute__((optimize)) which replaces
> optimization options rather than appending so could result in
> dropping important flags. Not recommended for production use.
>
> Because these options should always be enabled for this file,
> it's better to set them via command line. tree-vectorize is on
> by default in Clang, but it doesn't hurt to make it explicit.
>
> Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
> Suggested-by: Ard Biesheuvel <ardb@kernel.org>
> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>

Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

> ---
>  arch/arm/lib/Makefile   |  2 +-
>  arch/arm/lib/xor-neon.c | 10 ----------
>  2 files changed, 1 insertion(+), 11 deletions(-)
>
> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
> index 6d2ba454f25b..12d31d1a7630 100644
> --- a/arch/arm/lib/Makefile
> +++ b/arch/arm/lib/Makefile
> @@ -45,6 +45,6 @@ $(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
>
>  ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
>    NEON_FLAGS                   := -march=armv7-a -mfloat-abi=softfp -mfpu=neon
> -  CFLAGS_xor-neon.o            += $(NEON_FLAGS)
> +  CFLAGS_xor-neon.o            += $(NEON_FLAGS) -ftree-vectorize -Wno-unused-variable
>    obj-$(CONFIG_XOR_BLOCKS)     += xor-neon.o
>  endif
> diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
> index e1e76186ec23..62b493e386c4 100644
> --- a/arch/arm/lib/xor-neon.c
> +++ b/arch/arm/lib/xor-neon.c
> @@ -14,16 +14,6 @@ MODULE_LICENSE("GPL");
>  #error You should compile this file with '-march=armv7-a -mfloat-abi=softfp -mfpu=neon'
>  #endif
>
> -/*
> - * Pull in the reference implementations while instructing GCC (through
> - * -ftree-vectorize) to attempt to exploit implicit parallelism and emit
> - * NEON instructions.
> - */
> -#ifdef CONFIG_CC_IS_GCC
> -#pragma GCC optimize "tree-vectorize"
> -#endif
> -
> -#pragma GCC diagnostic ignored "-Wunused-variable"
>  #include <asm-generic/xor.h>
>
>  struct xor_block_template const xor_block_neon_inner = {
> --
> 2.29.2
>


-- 
Thanks,
~Nick Desaulniers

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-11-12 21:40 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-12 21:24 [PATCH v2 0/2] xor-neon: Remove GCC warn & pragmas Adrian Ratiu
2020-11-12 21:24 ` Adrian Ratiu
2020-11-12 21:24 ` [PATCH v2 1/2] arm: lib: xor-neon: remove unnecessary GCC < 4.6 warning Adrian Ratiu
2020-11-12 21:24   ` Adrian Ratiu
2020-11-12 21:38   ` Nick Desaulniers
2020-11-12 21:38     ` Nick Desaulniers
2020-11-13  7:49   ` Ard Biesheuvel
2020-11-13  7:49     ` Ard Biesheuvel
2020-11-13 11:07     ` Adrian Ratiu
2020-11-13 11:07       ` Adrian Ratiu
2020-11-13 11:41       ` Ard Biesheuvel
2020-11-13 11:41         ` Ard Biesheuvel
2020-11-13 11:59         ` Adrian Ratiu
2020-11-13 11:59           ` Adrian Ratiu
2020-11-12 21:24 ` [PATCH v2 2/2] arm: lib: xor-neon: move pragma options to makefile Adrian Ratiu
2020-11-12 21:24   ` Adrian Ratiu
2020-11-12 21:40   ` Nick Desaulniers [this message]
2020-11-12 21:40     ` Nick Desaulniers
2020-11-12 21:50   ` Nathan Chancellor
2020-11-12 21:50     ` Nathan Chancellor
2020-11-13  7:50   ` Ard Biesheuvel
2020-11-13  7:50     ` Ard Biesheuvel
2020-11-13 11:17     ` Adrian Ratiu
2020-11-13 11:17       ` Adrian Ratiu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAKwvOdkM7q2muArRQxgZ3SdCHYTUja-KtkCveo8bq3RV8GWfKw@mail.gmail.com \
    --to=ndesaulniers@google.com \
    --cc=adrian.ratiu@collabora.com \
    --cc=ardb@kernel.org \
    --cc=arnd@arndb.de \
    --cc=clang-built-linux@googlegroups.com \
    --cc=kernel@collabora.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=natechancellor@gmail.com \
    --cc=nivedita@alum.mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.