On Wednesday, November 27, 2019, Michael Rolnik <mrolnik@gmail.com> wrote:

> This includes:
>     - LSR, ROR
>     - ASR
>     - SWAP
>     - SBI, CBI
>     - BST, BLD
>     - BSET, BCLR
>
> Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
> ---
>  target/avr/translate.c | 1123 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 1123 insertions(+)
>
>
Hello, Michael

I said I am on vacation, and truly I am, but, fir the next version if the
series, I would like to ask you to extract "data transfer" instruction (as
defined in avr docs, MOV LD ST etc) from this patch, and create a new patch
for them - so that the patches follow the division from docs.

Yours,
Aleksandar





> diff --git a/target/avr/translate.c b/target/avr/translate.c
> index 48a42c984a..dc6a1af2fc 100644
> --- a/target/avr/translate.c
> +++ b/target/avr/translate.c
> @@ -317,6 +317,15 @@ static void gen_goto_tb(DisasContext *ctx, int n,
> target_ulong dest)
>  }
>
>
> +static void gen_rshift_ZNVSf(TCGv R)
> +{
> +    tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, R, 0); /* Zf = R == 0 */
> +    tcg_gen_shri_tl(cpu_Nf, R, 7); /* Nf = R(7) */
> +    tcg_gen_xor_tl(cpu_Vf, cpu_Nf, cpu_Cf);
> +    tcg_gen_xor_tl(cpu_Sf, cpu_Nf, cpu_Vf); /* Sf = Nf ^ Vf */
> +}
> +
> +
>  /*
>   *  Adds two registers without the C Flag and places the result in the
>   *  destination register Rd.
> @@ -1508,3 +1517,1117 @@ static bool trans_BRBS(DisasContext *ctx,
> arg_BRBS *a)
>      return true;
>  }
>
> +
> +/*
> + *  This instruction makes a copy of one register into another. The source
> + *  register Rr is left unchanged, while the destination register Rd is
> loaded
> + *  with a copy of Rr.
> + */
> +static bool trans_MOV(DisasContext *ctx, arg_MOV *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv Rr = cpu_r[a->rr];
> +
> +    tcg_gen_mov_tl(Rd, Rr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  This instruction makes a copy of one register pair into another
> register
> + *  pair. The source register pair Rr+1:Rr is left unchanged, while the
> + *  destination register pair Rd+1:Rd is loaded with a copy of Rr +
> 1:Rr.  This
> + *  instruction is not available in all devices. Refer to the device
> specific
> + *  instruction set summary.
> + */
> +static bool trans_MOVW(DisasContext *ctx, arg_MOVW *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_MOVW)) {
> +        return true;
> +    }
> +
> +    TCGv RdL = cpu_r[a->rd];
> +    TCGv RdH = cpu_r[a->rd + 1];
> +    TCGv RrL = cpu_r[a->rr];
> +    TCGv RrH = cpu_r[a->rr + 1];
> +
> +    tcg_gen_mov_tl(RdH, RrH);
> +    tcg_gen_mov_tl(RdL, RrL);
> +
> +    return true;
> +}
> +
> +
> +/*
> + * Loads an 8 bit constant directly to register 16 to 31.
> + */
> +static bool trans_LDI(DisasContext *ctx, arg_LDI *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    int imm = a->imm;
> +
> +    tcg_gen_movi_tl(Rd, imm);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Loads one byte from the data space to a register. For parts with SRAM,
> + *  the data space consists of the Register File, I/O memory and internal
> SRAM
> + *  (and external SRAM if applicable). For parts without SRAM, the data
> space
> + *  consists of the register file only. The EEPROM has a separate address
> space.
> + *  A 16-bit address must be supplied. Memory access is limited to the
> current
> + *  data segment of 64KB. The LDS instruction uses the RAMPD Register to
> access
> + *  memory above 64KB. To access another data segment in devices with
> more than
> + *  64KB data space, the RAMPD in register in the I/O area has to be
> changed.
> + *  This instruction is not available in all devices. Refer to the device
> + *  specific instruction set summary.
> + */
> +static bool trans_LDS(DisasContext *ctx, arg_LDS *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = tcg_temp_new_i32();
> +    TCGv H = cpu_rampD;
> +    a->imm = next_word(ctx);
> +
> +    tcg_gen_mov_tl(addr, H); /* addr = H:M:L */
> +    tcg_gen_shli_tl(addr, addr, 16);
> +    tcg_gen_ori_tl(addr, addr, a->imm);
> +
> +    gen_data_load(ctx, Rd, addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Loads one byte indirect from the data space to a register. For parts
> + *  with SRAM, the data space consists of the Register File, I/O memory
> and
> + *  internal SRAM (and external SRAM if applicable). For parts without
> SRAM, the
> + *  data space consists of the Register File only. In some parts the Flash
> + *  Memory has been mapped to the data space and can be read using this
> command.
> + *  The EEPROM has a separate address space.  The data location is
> pointed to by
> + *  the X (16 bits) Pointer Register in the Register File. Memory access
> is
> + *  limited to the current data segment of 64KB. To access another data
> segment
> + *  in devices with more than 64KB data space, the RAMPX in register in
> the I/O
> + *  area has to be changed.  The X-pointer Register can either be left
> unchanged
> + *  by the operation, or it can be post-incremented or predecremented.
> These
> + *  features are especially suited for accessing arrays, tables, and Stack
> + *  Pointer usage of the X-pointer Register. Note that only the low byte
> of the
> + *  X-pointer is updated in devices with no more than 256 bytes data
> space. For
> + *  such devices, the high byte of the pointer is not used by this
> instruction
> + *  and can be used for other purposes. The RAMPX Register in the I/O
> area is
> + *  updated in parts with more than 64KB data space or more than 64KB
> Program
> + *  memory, and the increment/decrement is added to the entire 24-bit
> address on
> + *  such devices.  Not all variants of this instruction is available in
> all
> + *  devices. Refer to the device specific instruction set summary.  In the
> + *  Reduced Core tinyAVR the LD instruction can be used to achieve the
> same
> + *  operation as LPM since the program memory is mapped to the data memory
> + *  space.
> + */
> +static bool trans_LDX1(DisasContext *ctx, arg_LDX1 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_xaddr();
> +
> +    gen_data_load(ctx, Rd, addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_LDX2(DisasContext *ctx, arg_LDX2 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_xaddr();
> +
> +    gen_data_load(ctx, Rd, addr);
> +    tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
> +
> +    gen_set_xaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_LDX3(DisasContext *ctx, arg_LDX3 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_xaddr();
> +
> +    tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
> +    gen_data_load(ctx, Rd, addr);
> +    gen_set_xaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_STX1(DisasContext *ctx, arg_STX1 *a)
> +{
> +    TCGv Rd = cpu_r[a->rr];
> +    TCGv addr = gen_get_xaddr();
> +
> +    gen_data_store(ctx, Rd, addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +static bool trans_STX2(DisasContext *ctx, arg_STX2 *a)
> +{
> +    TCGv Rd = cpu_r[a->rr];
> +    TCGv addr = gen_get_xaddr();
> +
> +    gen_data_store(ctx, Rd, addr);
> +    tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
> +    gen_set_xaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +static bool trans_STX3(DisasContext *ctx, arg_STX3 *a)
> +{
> +    TCGv Rd = cpu_r[a->rr];
> +    TCGv addr = gen_get_xaddr();
> +
> +    tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
> +    gen_data_store(ctx, Rd, addr);
> +    gen_set_xaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Loads one byte indirect with or without displacement from the data
> space
> + *  to a register. For parts with SRAM, the data space consists of the
> Register
> + *  File, I/O memory and internal SRAM (and external SRAM if applicable).
> For
> + *  parts without SRAM, the data space consists of the Register File
> only. In
> + *  some parts the Flash Memory has been mapped to the data space and can
> be
> + *  read using this command. The EEPROM has a separate address space.
> The data
> + *  location is pointed to by the Y (16 bits) Pointer Register in the
> Register
> + *  File. Memory access is limited to the current data segment of 64KB. To
> + *  access another data segment in devices with more than 64KB data
> space, the
> + *  RAMPY in register in the I/O area has to be changed.  The Y-pointer
> Register
> + *  can either be left unchanged by the operation, or it can be
> post-incremented
> + *  or predecremented.  These features are especially suited for accessing
> + *  arrays, tables, and Stack Pointer usage of the Y-pointer Register.
> Note that
> + *  only the low byte of the Y-pointer is updated in devices with no more
> than
> + *  256 bytes data space. For such devices, the high byte of the pointer
> is not
> + *  used by this instruction and can be used for other purposes. The RAMPY
> + *  Register in the I/O area is updated in parts with more than 64KB data
> space
> + *  or more than 64KB Program memory, and the increment/decrement/
> displacement
> + *  is added to the entire 24-bit address on such devices.  Not all
> variants of
> + *  this instruction is available in all devices. Refer to the device
> specific
> + *  instruction set summary.  In the Reduced Core tinyAVR the LD
> instruction can
> + *  be used to achieve the same operation as LPM since the program memory
> is
> + *  mapped to the data memory space.
> + */
> +static bool trans_LDY2(DisasContext *ctx, arg_LDY2 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_yaddr();
> +
> +    gen_data_load(ctx, Rd, addr);
> +    tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
> +
> +    gen_set_yaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_LDY3(DisasContext *ctx, arg_LDY3 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_yaddr();
> +
> +    tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
> +    gen_data_load(ctx, Rd, addr);
> +    gen_set_yaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_LDDY(DisasContext *ctx, arg_LDDY *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_yaddr();
> +
> +    tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
> +    gen_data_load(ctx, Rd, addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_STY2(DisasContext *ctx, arg_STY2 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_yaddr();
> +
> +    gen_data_store(ctx, Rd, addr);
> +    tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
> +    gen_set_yaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_STY3(DisasContext *ctx, arg_STY3 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_yaddr();
> +
> +    tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
> +    gen_data_store(ctx, Rd, addr);
> +    gen_set_yaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_STDY(DisasContext *ctx, arg_STDY *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_yaddr();
> +
> +    tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
> +    gen_data_store(ctx, Rd, addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Loads one byte indirect with or without displacement from the data
> space
> + *  to a register. For parts with SRAM, the data space consists of the
> Register
> + *  File, I/O memory and internal SRAM (and external SRAM if applicable).
> For
> + *  parts without SRAM, the data space consists of the Register File
> only. In
> + *  some parts the Flash Memory has been mapped to the data space and can
> be
> + *  read using this command. The EEPROM has a separate address space.
> The data
> + *  location is pointed to by the Z (16 bits) Pointer Register in the
> Register
> + *  File. Memory access is limited to the current data segment of 64KB. To
> + *  access another data segment in devices with more than 64KB data
> space, the
> + *  RAMPZ in register in the I/O area has to be changed.  The Z-pointer
> Register
> + *  can either be left unchanged by the operation, or it can be
> post-incremented
> + *  or predecremented.  These features are especially suited for Stack
> Pointer
> + *  usage of the Z-pointer Register, however because the Z-pointer
> Register can
> + *  be used for indirect subroutine calls, indirect jumps and table
> lookup, it
> + *  is often more convenient to use the X or Y-pointer as a dedicated
> Stack
> + *  Pointer. Note that only the low byte of the Z-pointer is updated in
> devices
> + *  with no more than 256 bytes data space. For such devices, the high
> byte of
> + *  the pointer is not used by this instruction and can be used for other
> + *  purposes. The RAMPZ Register in the I/O area is updated in parts with
> more
> + *  than 64KB data space or more than 64KB Program memory, and the
> + *  increment/decrement/displacement is added to the entire 24-bit
> address on
> + *  such devices.  Not all variants of this instruction is available in
> all
> + *  devices. Refer to the device specific instruction set summary.  In the
> + *  Reduced Core tinyAVR the LD instruction can be used to achieve the
> same
> + *  operation as LPM since the program memory is mapped to the data memory
> + *  space.  For using the Z-pointer for table lookup in Program memory
> see the
> + *  LPM and ELPM instructions.
> + */
> +static bool trans_LDZ2(DisasContext *ctx, arg_LDZ2 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +
> +    gen_data_load(ctx, Rd, addr);
> +    tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
> +
> +    gen_set_zaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_LDZ3(DisasContext *ctx, arg_LDZ3 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +
> +    tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
> +    gen_data_load(ctx, Rd, addr);
> +
> +    gen_set_zaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_LDDZ(DisasContext *ctx, arg_LDDZ *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +
> +    tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
> +    gen_data_load(ctx, Rd, addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_STZ2(DisasContext *ctx, arg_STZ2 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +
> +    gen_data_store(ctx, Rd, addr);
> +    tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
> +
> +    gen_set_zaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_STZ3(DisasContext *ctx, arg_STZ3 *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +
> +    tcg_gen_subi_tl(addr, addr, 1); /* addr = addr - 1 */
> +    gen_data_store(ctx, Rd, addr);
> +
> +    gen_set_zaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_STDZ(DisasContext *ctx, arg_STDZ *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +
> +    tcg_gen_addi_tl(addr, addr, a->imm); /* addr = addr + q */
> +    gen_data_store(ctx, Rd, addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +
> +/*
> + *  Stores one byte from a Register to the data space. For parts with
> SRAM,
> + *  the data space consists of the Register File, I/O memory and internal
> SRAM
> + *  (and external SRAM if applicable). For parts without SRAM, the data
> space
> + *  consists of the Register File only. The EEPROM has a separate address
> space.
> + *  A 16-bit address must be supplied. Memory access is limited to the
> current
> + *  data segment of 64KB. The STS instruction uses the RAMPD Register to
> access
> + *  memory above 64KB. To access another data segment in devices with
> more than
> + *  64KB data space, the RAMPD in register in the I/O area has to be
> changed.
> + *  This instruction is not available in all devices. Refer to the device
> + *  specific instruction set summary.
> + */
> +static bool trans_STS(DisasContext *ctx, arg_STS *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = tcg_temp_new_i32();
> +    TCGv H = cpu_rampD;
> +    a->imm = next_word(ctx);
> +
> +    tcg_gen_mov_tl(addr, H); /* addr = H:M:L */
> +    tcg_gen_shli_tl(addr, addr, 16);
> +    tcg_gen_ori_tl(addr, addr, a->imm);
> +
> +    gen_data_store(ctx, Rd, addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Loads one byte pointed to by the Z-register into the destination
> + *  register Rd. This instruction features a 100% space effective constant
> + *  initialization or constant data fetch. The Program memory is
> organized in
> + *  16-bit words while the Z-pointer is a byte address. Thus, the least
> + *  significant bit of the Z-pointer selects either low byte (ZLSB = 0)
> or high
> + *  byte (ZLSB = 1). This instruction can address the first 64KB (32K
> words) of
> + *  Program memory. The Zpointer Register can either be left unchanged by
> the
> + *  operation, or it can be incremented. The incrementation does not
> apply to
> + *  the RAMPZ Register.  Devices with Self-Programming capability can use
> the
> + *  LPM instruction to read the Fuse and Lock bit values.  Refer to the
> device
> + *  documentation for a detailed description.  The LPM instruction is not
> + *  available in all devices. Refer to the device specific instruction set
> + *  summary
> + */
> +static bool trans_LPM1(DisasContext *ctx, arg_LPM1 *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_LPM)) {
> +        return true;
> +    }
> +
> +    TCGv Rd = cpu_r[0];
> +    TCGv addr = tcg_temp_new_i32();
> +    TCGv H = cpu_r[31];
> +    TCGv L = cpu_r[30];
> +
> +    tcg_gen_shli_tl(addr, H, 8); /* addr = H:L */
> +    tcg_gen_or_tl(addr, addr, L);
> +
> +    tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_LPM2(DisasContext *ctx, arg_LPM2 *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_LPM)) {
> +        return true;
> +    }
> +
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = tcg_temp_new_i32();
> +    TCGv H = cpu_r[31];
> +    TCGv L = cpu_r[30];
> +
> +    tcg_gen_shli_tl(addr, H, 8); /* addr = H:L */
> +    tcg_gen_or_tl(addr, addr, L);
> +
> +    tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_LPMX(DisasContext *ctx, arg_LPMX *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_LPMX)) {
> +        return true;
> +    }
> +
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = tcg_temp_new_i32();
> +    TCGv H = cpu_r[31];
> +    TCGv L = cpu_r[30];
> +
> +    tcg_gen_shli_tl(addr, H, 8); /* addr = H:L */
> +    tcg_gen_or_tl(addr, addr, L);
> +
> +    tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
> +
> +    tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
> +
> +    tcg_gen_andi_tl(L, addr, 0xff);
> +
> +    tcg_gen_shri_tl(addr, addr, 8);
> +    tcg_gen_andi_tl(H, addr, 0xff);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Loads one byte pointed to by the Z-register and the RAMPZ Register in
> + *  the I/O space, and places this byte in the destination register Rd.
> This
> + *  instruction features a 100% space effective constant initialization or
> + *  constant data fetch. The Program memory is organized in 16-bit words
> while
> + *  the Z-pointer is a byte address. Thus, the least significant bit of
> the
> + *  Z-pointer selects either low byte (ZLSB = 0) or high byte (ZLSB = 1).
> This
> + *  instruction can address the entire Program memory space. The Z-pointer
> + *  Register can either be left unchanged by the operation, or it can be
> + *  incremented. The incrementation applies to the entire 24-bit
> concatenation
> + *  of the RAMPZ and Z-pointer Registers.  Devices with Self-Programming
> + *  capability can use the ELPM instruction to read the Fuse and Lock bit
> value.
> + *  Refer to the device documentation for a detailed description.  This
> + *  instruction is not available in all devices. Refer to the device
> specific
> + *  instruction set summary.
> + */
> +static bool trans_ELPM1(DisasContext *ctx, arg_ELPM1 *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_ELPM)) {
> +        return true;
> +    }
> +
> +    TCGv Rd = cpu_r[0];
> +    TCGv addr = gen_get_zaddr();
> +
> +    tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_ELPM2(DisasContext *ctx, arg_ELPM2 *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_ELPM)) {
> +        return true;
> +    }
> +
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +
> +    tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +static bool trans_ELPMX(DisasContext *ctx, arg_ELPMX *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_ELPMX)) {
> +        return true;
> +    }
> +
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +
> +    tcg_gen_qemu_ld8u(Rd, addr, MMU_CODE_IDX); /* Rd = mem[addr] */
> +
> +    tcg_gen_addi_tl(addr, addr, 1); /* addr = addr + 1 */
> +
> +    gen_set_zaddr(addr);
> +
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  SPM can be used to erase a page in the Program memory, to write a page
> + *  in the Program memory (that is already erased), and to set Boot
> Loader Lock
> + *  bits. In some devices, the Program memory can be written one word at
> a time,
> + *  in other devices an entire page can be programmed simultaneously
> after first
> + *  filling a temporary page buffer. In all cases, the Program memory
> must be
> + *  erased one page at a time. When erasing the Program memory, the RAMPZ
> and
> + *  Z-register are used as page address. When writing the Program memory,
> the
> + *  RAMPZ and Z-register are used as page or word address, and the R1:R0
> + *  register pair is used as data(1). When setting the Boot Loader Lock
> bits,
> + *  the R1:R0 register pair is used as data. Refer to the device
> documentation
> + *  for detailed description of SPM usage. This instruction can address
> the
> + *  entire Program memory.  The SPM instruction is not available in all
> devices.
> + *  Refer to the device specific instruction set summary.  Note: 1. R1
> + *  determines the instruction high byte, and R0 determines the
> instruction low
> + *  byte.
> + */
> +static bool trans_SPM(DisasContext *ctx, arg_SPM *a)
> +{
> +    /* TODO */
> +    if (!avr_have_feature(ctx, AVR_FEATURE_SPM)) {
> +        return true;
> +    }
> +
> +    return true;
> +}
> +
> +
> +static bool trans_SPMX(DisasContext *ctx, arg_SPMX *a)
> +{
> +    /* TODO */
> +    if (!avr_have_feature(ctx, AVR_FEATURE_SPMX)) {
> +        return true;
> +    }
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Loads data from the I/O Space (Ports, Timers, Configuration Registers,
> + *  etc.) into register Rd in the Register File.
> + */
> +static bool trans_IN(DisasContext *ctx, arg_IN *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv port = tcg_const_i32(a->imm);
> +
> +    gen_helper_inb(Rd, cpu_env, port);
> +
> +    tcg_temp_free_i32(port);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Stores data from register Rr in the Register File to I/O Space (Ports,
> + *  Timers, Configuration Registers, etc.).
> + */
> +static bool trans_OUT(DisasContext *ctx, arg_OUT *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv port = tcg_const_i32(a->imm);
> +
> +    gen_helper_outb(cpu_env, port, Rd);
> +
> +    tcg_temp_free_i32(port);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  This instruction stores the contents of register Rr on the STACK. The
> + *  Stack Pointer is post-decremented by 1 after the PUSH.  This
> instruction is
> + *  not available in all devices. Refer to the device specific
> instruction set
> + *  summary.
> + */
> +static bool trans_PUSH(DisasContext *ctx, arg_PUSH *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +
> +    gen_data_store(ctx, Rd, cpu_sp);
> +    tcg_gen_subi_tl(cpu_sp, cpu_sp, 1);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  This instruction loads register Rd with a byte from the STACK. The
> Stack
> + *  Pointer is pre-incremented by 1 before the POP.  This instruction is
> not
> + *  available in all devices. Refer to the device specific instruction set
> + *  summary.
> + */
> +static bool trans_POP(DisasContext *ctx, arg_POP *a)
> +{
> +    /*
> +     * Using a temp to work around some strange behaviour:
> +     * tcg_gen_addi_tl(cpu_sp, cpu_sp, 1);
> +     * gen_data_load(ctx, Rd, cpu_sp);
> +     * seems to cause the add to happen twice.
> +     * This doesn't happen if either the add or the load is removed.
> +     */
> +    TCGv t1 = tcg_temp_new_i32();
> +    TCGv Rd = cpu_r[a->rd];
> +
> +    tcg_gen_addi_tl(t1, cpu_sp, 1);
> +    gen_data_load(ctx, Rd, t1);
> +    tcg_gen_mov_tl(cpu_sp, t1);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Exchanges one byte indirect between register and data space.  The data
> + *  location is pointed to by the Z (16 bits) Pointer Register in the
> Register
> + *  File. Memory access is limited to the current data segment of 64KB. To
> + *  access another data segment in devices with more than 64KB data
> space, the
> + *  RAMPZ in register in the I/O area has to be changed.  The Z-pointer
> Register
> + *  is left unchanged by the operation. This instruction is especially
> suited
> + *  for writing/reading status bits stored in SRAM.
> + */
> +static bool trans_XCH(DisasContext *ctx, arg_XCH *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
> +        return true;
> +    }
> +
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv t0 = tcg_temp_new_i32();
> +    TCGv addr = gen_get_zaddr();
> +
> +    gen_data_load(ctx, t0, addr);
> +    gen_data_store(ctx, Rd, addr);
> +    tcg_gen_mov_tl(Rd, t0);
> +
> +    tcg_temp_free_i32(t0);
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Load one byte indirect from data space to register and set bits in
> data
> + *  space specified by the register. The instruction can only be used
> towards
> + *  internal SRAM.  The data location is pointed to by the Z (16 bits)
> Pointer
> + *  Register in the Register File. Memory access is limited to the
> current data
> + *  segment of 64KB. To access another data segment in devices with more
> than
> + *  64KB data space, the RAMPZ in register in the I/O area has to be
> changed.
> + *  The Z-pointer Register is left unchanged by the operation. This
> instruction
> + *  is especially suited for setting status bits stored in SRAM.
> + */
> +static bool trans_LAS(DisasContext *ctx, arg_LAS *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
> +        return true;
> +    }
> +
> +    TCGv Rr = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +    TCGv t0 = tcg_temp_new_i32();
> +    TCGv t1 = tcg_temp_new_i32();
> +
> +    gen_data_load(ctx, t0, addr); /* t0 = mem[addr] */
> +    tcg_gen_or_tl(t1, t0, Rr);
> +
> +    tcg_gen_mov_tl(Rr, t0); /* Rr = t0 */
> +    gen_data_store(ctx, t1, addr); /* mem[addr] = t1 */
> +
> +    tcg_temp_free_i32(t1);
> +    tcg_temp_free_i32(t0);
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Load one byte indirect from data space to register and stores and
> clear
> + *  the bits in data space specified by the register. The instruction can
> + *  only be used towards internal SRAM.  The data location is pointed to
> by
> + *  the Z (16 bits) Pointer Register in the Register File. Memory access
> is
> + *  limited to the current data segment of 64KB. To access another data
> + *  segment in devices with more than 64KB data space, the RAMPZ in
> register
> + *  in the I/O area has to be changed.  The Z-pointer Register is left
> + *  unchanged by the operation. This instruction is especially suited for
> + *  clearing status bits stored in SRAM.
> + */
> +static bool trans_LAC(DisasContext *ctx, arg_LAC *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
> +        return true;
> +    }
> +
> +    TCGv Rr = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +    TCGv t0 = tcg_temp_new_i32();
> +    TCGv t1 = tcg_temp_new_i32();
> +
> +    gen_data_load(ctx, t0, addr); /* t0 = mem[addr] */
> +        /* t1 = t0 & (0xff - Rr) = t0 and ~Rr */
> +    tcg_gen_andc_tl(t1, t0, Rr);
> +
> +    tcg_gen_mov_tl(Rr, t0); /* Rr = t0 */
> +    gen_data_store(ctx, t1, addr); /* mem[addr] = t1 */
> +
> +    tcg_temp_free_i32(t1);
> +    tcg_temp_free_i32(t0);
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Load one byte indirect from data space to register and toggles bits in
> + *  the data space specified by the register.  The instruction can only
> be used
> + *  towards SRAM.  The data location is pointed to by the Z (16 bits)
> Pointer
> + *  Register in the Register File. Memory access is limited to the
> current data
> + *  segment of 64KB. To access another data segment in devices with more
> than
> + *  64KB data space, the RAMPZ in register in the I/O area has to be
> changed.
> + *  The Z-pointer Register is left unchanged by the operation. This
> instruction
> + *  is especially suited for changing status bits stored in SRAM.
> + */
> +static bool trans_LAT(DisasContext *ctx, arg_LAT *a)
> +{
> +    if (!avr_have_feature(ctx, AVR_FEATURE_RMW)) {
> +        return true;
> +    }
> +
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv addr = gen_get_zaddr();
> +    TCGv t0 = tcg_temp_new_i32();
> +    TCGv t1 = tcg_temp_new_i32();
> +
> +    gen_data_load(ctx, t0, addr); /* t0 = mem[addr] */
> +    tcg_gen_xor_tl(t1, t0, Rd);
> +
> +    tcg_gen_mov_tl(Rd, t0); /* Rd = t0 */
> +    gen_data_store(ctx, t1, addr); /* mem[addr] = t1 */
> +
> +    tcg_temp_free_i32(t1);
> +    tcg_temp_free_i32(t0);
> +    tcg_temp_free_i32(addr);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Shifts all bits in Rd one place to the right. Bit 7 is cleared. Bit 0
> is
> + *  loaded into the C Flag of the SREG. This operation effectively
> divides an
> + *  unsigned value by two. The C Flag can be used to round the result.
> + */
> +static bool trans_LSR(DisasContext *ctx, arg_LSR *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +
> +    tcg_gen_andi_tl(cpu_Cf, Rd, 1);
> +
> +    tcg_gen_shri_tl(Rd, Rd, 1);
> +
> +    tcg_gen_setcondi_tl(TCG_COND_EQ, cpu_Zf, Rd, 0); /* Zf = Rd == 0 */
> +    tcg_gen_movi_tl(cpu_Nf, 0);
> +    tcg_gen_mov_tl(cpu_Vf, cpu_Cf);
> +    tcg_gen_mov_tl(cpu_Sf, cpu_Vf);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Shifts all bits in Rd one place to the right. The C Flag is shifted
> into
> + *  bit 7 of Rd. Bit 0 is shifted into the C Flag.  This operation,
> combined
> + *  with ASR, effectively divides multi-byte signed values by two.
> Combined with
> + *  LSR it effectively divides multi-byte unsigned values by two. The
> Carry Flag
> + *  can be used to round the result.
> + */
> +static bool trans_ROR(DisasContext *ctx, arg_ROR *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv t0 = tcg_temp_new_i32();
> +
> +    tcg_gen_shli_tl(t0, cpu_Cf, 7);
> +    tcg_gen_andi_tl(cpu_Cf, Rd, 1);
> +    tcg_gen_shri_tl(Rd, Rd, 1);
> +    tcg_gen_or_tl(Rd, Rd, t0);
> +
> +    gen_rshift_ZNVSf(Rd);
> +
> +    tcg_temp_free_i32(t0);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Shifts all bits in Rd one place to the right. Bit 7 is held constant.
> Bit 0
> + *  is loaded into the C Flag of the SREG. This operation effectively
> divides a
> + *  signed value by two without changing its sign. The Carry Flag can be
> used to
> + *  round the result.
> + */
> +static bool trans_ASR(DisasContext *ctx, arg_ASR *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv t0 = tcg_temp_new_i32();
> +
> +    /* Cf */
> +    tcg_gen_andi_tl(cpu_Cf, Rd, 1); /* Cf = Rd(0) */
> +
> +    /* op */
> +    tcg_gen_andi_tl(t0, Rd, 0x80); /* Rd = (Rd & 0x80) | (Rd >> 1) */
> +    tcg_gen_shri_tl(Rd, Rd, 1);
> +    tcg_gen_or_tl(Rd, Rd, t0);
> +
> +    gen_rshift_ZNVSf(Rd);
> +
> +    tcg_temp_free_i32(t0);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Swaps high and low nibbles in a register.
> + */
> +static bool trans_SWAP(DisasContext *ctx, arg_SWAP *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv t0 = tcg_temp_new_i32();
> +    TCGv t1 = tcg_temp_new_i32();
> +
> +    tcg_gen_andi_tl(t0, Rd, 0x0f);
> +    tcg_gen_shli_tl(t0, t0, 4);
> +    tcg_gen_andi_tl(t1, Rd, 0xf0);
> +    tcg_gen_shri_tl(t1, t1, 4);
> +    tcg_gen_or_tl(Rd, t0, t1);
> +
> +    tcg_temp_free_i32(t1);
> +    tcg_temp_free_i32(t0);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Sets a specified bit in an I/O Register. This instruction operates on
> + *  the lower 32 I/O Registers -- addresses 0-31.
> + */
> +static bool trans_SBI(DisasContext *ctx, arg_SBI *a)
> +{
> +    TCGv data = tcg_temp_new_i32();
> +    TCGv port = tcg_const_i32(a->reg);
> +
> +    gen_helper_inb(data, cpu_env, port);
> +    tcg_gen_ori_tl(data, data, 1 << a->bit);
> +    gen_helper_outb(cpu_env, port, data);
> +
> +    tcg_temp_free_i32(port);
> +    tcg_temp_free_i32(data);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Clears a specified bit in an I/O Register. This instruction operates
> on
> + *  the lower 32 I/O Registers -- addresses 0-31.
> + */
> +static bool trans_CBI(DisasContext *ctx, arg_CBI *a)
> +{
> +    TCGv data = tcg_temp_new_i32();
> +    TCGv port = tcg_const_i32(a->reg);
> +
> +    gen_helper_inb(data, cpu_env, port);
> +    tcg_gen_andi_tl(data, data, ~(1 << a->bit));
> +    gen_helper_outb(cpu_env, port, data);
> +
> +    tcg_temp_free_i32(data);
> +    tcg_temp_free_i32(port);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Stores bit b from Rd to the T Flag in SREG (Status Register).
> + */
> +static bool trans_BST(DisasContext *ctx, arg_BST *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +
> +    tcg_gen_andi_tl(cpu_Tf, Rd, 1 << a->bit);
> +    tcg_gen_shri_tl(cpu_Tf, cpu_Tf, a->bit);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Copies the T Flag in the SREG (Status Register) to bit b in register
> Rd.
> + */
> +static bool trans_BLD(DisasContext *ctx, arg_BLD *a)
> +{
> +    TCGv Rd = cpu_r[a->rd];
> +    TCGv t1 = tcg_temp_new_i32();
> +
> +    tcg_gen_andi_tl(Rd, Rd, ~(1u << a->bit)); /* clear bit */
> +    tcg_gen_shli_tl(t1, cpu_Tf, a->bit); /* create mask */
> +    tcg_gen_or_tl(Rd, Rd, t1);
> +
> +    tcg_temp_free_i32(t1);
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Sets a single Flag or bit in SREG.
> + */
> +static bool trans_BSET(DisasContext *ctx, arg_BSET *a)
> +{
> +    switch (a->bit) {
> +    case 0x00:
> +        tcg_gen_movi_tl(cpu_Cf, 0x01);
> +        break;
> +    case 0x01:
> +        tcg_gen_movi_tl(cpu_Zf, 0x01);
> +        break;
> +    case 0x02:
> +        tcg_gen_movi_tl(cpu_Nf, 0x01);
> +        break;
> +    case 0x03:
> +        tcg_gen_movi_tl(cpu_Vf, 0x01);
> +        break;
> +    case 0x04:
> +        tcg_gen_movi_tl(cpu_Sf, 0x01);
> +        break;
> +    case 0x05:
> +        tcg_gen_movi_tl(cpu_Hf, 0x01);
> +        break;
> +    case 0x06:
> +        tcg_gen_movi_tl(cpu_Tf, 0x01);
> +        break;
> +    case 0x07:
> +        tcg_gen_movi_tl(cpu_If, 0x01);
> +        break;
> +    }
> +
> +    return true;
> +}
> +
> +
> +/*
> + *  Clears a single Flag in SREG.
> + */
> +static bool trans_BCLR(DisasContext *ctx, arg_BCLR *a)
> +{
> +    switch (a->bit) {
> +    case 0x00:
> +        tcg_gen_movi_tl(cpu_Cf, 0x00);
> +        break;
> +    case 0x01:
> +        tcg_gen_movi_tl(cpu_Zf, 0x00);
> +        break;
> +    case 0x02:
> +        tcg_gen_movi_tl(cpu_Nf, 0x00);
> +        break;
> +    case 0x03:
> +        tcg_gen_movi_tl(cpu_Vf, 0x00);
> +        break;
> +    case 0x04:
> +        tcg_gen_movi_tl(cpu_Sf, 0x00);
> +        break;
> +    case 0x05:
> +        tcg_gen_movi_tl(cpu_Hf, 0x00);
> +        break;
> +    case 0x06:
> +        tcg_gen_movi_tl(cpu_Tf, 0x00);
> +        break;
> +    case 0x07:
> +        tcg_gen_movi_tl(cpu_If, 0x00);
> +        break;
> +    }
> +
> +    return true;
> +}
> --
> 2.17.2 (Apple Git-113)
>
>